1. Compare the volumes of 0.1 mol/L sodium hydroxide solution required to neutralize equalvolumes of 0.1 mol/L solutions ofa. nitric acid, HNO3, =b. phosphoric acid, H₃PO₄. =DoubleTripleHalfSame

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

To calculate the given expression: (43 × 2.310) + (7 × 0.370), we perform the multiplication first and then add the results.

Multiplying the counted numbers:

43 × 2.310 = 99.330

Multiplying the measured numbers:

7 × 0.370 = 2.590

Now, we add the results:

99.330 + 2.590 = 101.920

The correct answer is not provided in the given options: a) 38.35, b) 38.4, c) 38, or d) 40.

The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.

It's important to note that when performing calculations, it is crucial to accurately follow the order of operations (multiplication before addition) and ensure precision when dealing with decimal numbers.

In this case, the correct answer is not among the options provided, and the accurate result is 101.920.

For more such questions on calculation visit:

https://brainly.com/question/28902645

#SPJ8

Answer:

c

Explanation:

i rememer this from 3rd grade

Unit' is the word used to describe how something is measured. When researching a question in science, we collect data, interpret it, and share the results with other scientists. A common measurement system allows us to make direct comparisons instead of having to know things like how much a certain animal weighs.

Answer:

400.0°F is equal to 204.44°C in standard notation.

Explanation:

To convert from Fahrenheit (°F) to Celsius (°C), we can use the following formula:

T(°C) = (T(°F) - 32) × 5/9

where T(°F) is the temperature in Fahrenheit and T(°C) is the temperature in Celsius.

Substituting T(°F) = 400.0 into the formula, we get:

T(°C) = (400.0 - 32) × 5/9

T(°C) = (368.0) × 5/9

T(°C) = 204.44

Therefore, 400.0°F is equal to 204.44°C in standard notation.

Answer:

The end point of a titration is the point at which the reaction between the analyte (the substance being analyzed) and the titrant (the solution being added to the analyte) is complete. The end point is usually determined by a change in the color of the solution, and this change is typically caused by an indicator added to the analyte solution.

The indicator is a substance that changes color at or around the pH at which the reaction is complete. The indicator is chosen based on the properties of the analyte and titrant, and the pH range over which the reaction occurs. Common indicators include phenolphthalein, bromothymol blue, and methyl orange.

For example, when titrating a strong acid (like HCl) with a strong base (like NaOH), phenolphthalein is often used as the indicator. The phenolphthalein molecules are colorless in acidic solution, but they turn pink in basic solution. As the NaOH is added to the HCl, the solution becomes increasingly basic. Once the pH reaches the endpoint, the indicator turns pink. This indicates that the reaction is complete and no further addition of NaOH is required to completely react with the HCl.

The endpoint determination is critical in performing accurate titrations. The endpoint must be identified accurately and consistently in order to obtain reliable and reproducible results.

A titration is a technique that is used to measure the concentration of an unknown substance in a solution using a standard solution with a known concentration. The endpoint of a titration is the point at which the reaction between the two solutions is complete, and no more titrant (standard solution) is needed to react with the analyte (unknown substance). There are several ways to recognize the endpoint of a titration, including:1. Indicators: An indicator is a substance that changes color when the endpoint is reached.

For such more question on titration

https://brainly.com/question/13031875

#SPJ8

Based on the definition of equivalence point and the data provided;

The equivalence point of a reaction is the point at which equal amounts of both acid and base have reacted.

Equation of the reaction is as follows:

HCl + Ca(OH)2 ---> CaCl2 + 2 H20

Moles of HCl reacted = molarity × volume in L

Moles of HCl reacted = 0.05 M × 16/1000 = 0.0008 moles

Therefore, moles of OH- present = 0.0008 moles

Also, moles of Ca2+ present = 0.0008/2 = 0.0004 moles

The molar solubility product Ksp of calcium hydroxide is calculated as follows.

volume of solution = 36 mL = 0.036 L

[Ca2+] = 0.0004 / 0.036 = 0.011 M

[OH] = 0.0008 / 0.036 = 0.022 M

Ksp = (0.011)^2 × 2(0.022)

Ksp = 5.324 × 10^-8

Therefore, the moles of OH- present is 0.0008 moles and the moles of Ca2+ present is 0.0004 moles.

The Ksp of calcium hydroxide 5.324 × 10^-8

Learn more about equivalence point at: https://brainly.com/question/24584140

The pOH of the 0.001 M NaOH solution is approximately 3.

To determine the pOH of a solution, we need to know the concentration of hydroxide ions (OH-) in the solution.

In the case of a 0.001 M NaOH solution, we can assume that all of the NaOH dissociates completely in water to form Na+ and OH- ions. Therefore, the concentration of hydroxide ions in the solution is also 0.001 M.

The pOH is calculated using the equation:

pOH = -log[OH-]

Substituting the concentration of hydroxide ions, we have:

pOH = -log(0.001)

Using a calculator, we can evaluate the logarithm:

pOH ≈ 3

Therefore, the pOH of the 0.001 M NaOH solution is approximately 3.

Know more about  hydroxide ions   here:

https://brainly.com/question/28464162

#SPJ8

The reaction mechanism explains the separate phases of a reaction and identifies any intermediates that are produced during one step and used in a different step later in the reaction.

One or maybe more chemicals, commonly referred to as reaction mixture, are converted within one or more chemical molecules, referred to as products, during a chemical reaction. Chemical elements and compounds are both substances.

Rearranging the atoms or molecules of two or more substances when they come into touch with one another, producing the production of one or more new substances. The interaction of two different substances' electrons is what drives chemical reactions.

To know more about Reaction visit:

https://brainly.com/question/28984750

#SPJ4

Answer:

the molecules of water contracts when it is frozen

Biotechnology is the use of living organisms or other biological systems in the manufacture of drugs or other products or for environmental management, as in waste recycling: includes the use of bioreactors in manufacturing, microorganisms to degrade oil slicks or organic waste, genetically engineered bacteria to produce human hormones, and monoclonal antibodies to identify antigens.

Biotech offers the possibility of improving human health, the environment, and agriculture while creating more sustainable modes of production.

An increased temperature generally causes a reaction to occur faster rather than slower. Therefore option C is correct.

The increased temperature leads to a higher average kinetic energy of the molecules, which results in more frequent and energetic collisions between the reactant particles.

This increased collision frequency and energy facilitate the breaking of chemical bonds and the formation of new bonds, leading to an accelerated reaction rate.

When the temperature is raised, the kinetic energy of the molecules increases. This means that the individual molecules move faster and possess a greater amount of energy. As a result, the molecules collide more frequently and with higher energy, enhancing the likelihood of successful collisions that lead to a reaction.

In summary, an increased temperature leads to a faster reaction rate by increasing the average kinetic energy of the particles, causing more frequent and energetic collisions.

To know more about temperature-

brainly.com/question/15520591

#SPJ1

Answer:

Explanation:

Greetings!!!

(NaPO3)6 Or Na2[Na4(PO3)6] is called Calgon, used to remove hardness of water. When the hard water is passed through Calgon.

Hope it helps!!!

Answer:

The correct answer to the following question will be "0.0013%".

Explanation:

The given values are:

Weight of an empty dish = 1.0041 ± 0.0002 g

Weight of dish + sodium chloride (NaCl) = 3.2933 ± 0.0002 g

Weight of NaCl = 2.2892 ± 0.0002 g

Now,

Volume of the solution = 500.00 ± 0.05 ± 0.0002

                                      = 500.00 ± 0.0502 ml

So,

Molarity = \(\frac{W \ NaCl}{M \ NaCl} \times \frac{1000}{Volumes \ of \ solution}\)

On putting the values in the above formula, we get

             = \(\frac{(2.2892\addeq +0.0002)}{58.440}\times \frac{1050}{(500.00+0.0502)}\)

             = (\(3.917\) ± \(0.0002\)) × (\(2\) ± \(0.0502\))

             = (\(0.7834\) ± \(.00001004\))

Now,

Absolute error = \(\frac{0.00001004}{0.7834}\times 100\)

                         = \(0.0013\)%

Answer:

\(\boxed {\boxed {\sf 0.0769 \ M}}\)

Explanation:

We are asked to find the molarity of an acid given the details of a titration experiment. The formula for titration is as follows:

\(M_AV_A= M_B V_B\)

In this formula, M is the molarity of the acid or base and V is the volume of the acid or base. The molarity of the hydrochloric acid (HCl) is unknown and the volume is 25.0 milliliters.

\(M_A * 25.0 \ mL = M_BV_B\)

The molarity of the sodium hydroxide (NaOH) is 0.108 molar and the volume is 17.80 milliliters.

\(M_A * 25.0 \ mL = 0.108 \ M * 17.80 \ mL\)

We are solving for the molarity of the acid and we must isolate the variable \(M_A\). It is being multiplied by 25.0 milliliters. The inverse operation of multiplication is division, so we divide both sides of the equation by 25.0 mL.

\(\frac {M_A * 25.0 \ mL }{25.0 \ mL}= \frac{0.108 \ M * 17.80 \ mL }{25.0 \ mL}\)

\(M_A= \frac{0.108 \ M * 17.80 \ mL }{25.0 \ mL}\)

The units of milliliters cancel.

\(M_A= \frac{0.108 \ M * 17.80 }{25.0 }\)

\(M_A= \frac{1.9224}{25.0 } \ M\)

\(M_A= 0.076896 \ M\)

The original measurements have 3 and 4 significant figures. We must round our answer to the least number of sig figs, which is 3. For the number we calculated, that is the ten-thousandth place. The 9 to the right of this place tells us to round the 8 up to a 9.

\(M_A \approx 0.0769 \ M\)

The molarity of the hydrochloric acid is 0.0769 Molar.

we would need 2625.13 grams (or 2.62513 kilograms) of NaCl.

To calculate the mass of NaCl required to produce a 26.4 mol/L solution with a 1.7 L volume, we need to use the formula that relates the mass of solute, moles of solute, and molarity:Molarity (M) = moles of solute / liters of solution Rearranging this formula, we get:moles of solute = Molarity (M) x liters of solutionWe can use this formula to find the moles of NaCl needed:moles of NaCl = 26.4 mol/L x 1.7 L = 44.88 molNow, we can use the molar mass of NaCl to convert from moles to grams. The molar mass of NaCl is 58.44 g/mol:mass of NaCl = moles of NaCl x molar mass of NaClmass of NaCl = 44.88 mol x 58.44 g/mol = 2625.13 gTo produce a 26.4 mol/L solution with a 1.7 L volume.

for more question on NaCl

https://brainly.com/question/23269908

#SPJ8

Answer:

Today, the average total production cost of “standard modulus” carbon fiber is in the range of $7-9 per pound.

Data changes with a change in the variable means 'changes in one variable brings about changes in the other'

A change of variables is the basic technique in which it is used to simplify problems in which originals variables are replaced with function of other variables and that's why data is also change and sketch the region given by the problem in the xy plane and then write the equation of the curves that form the boundary

Know more about variable

https://brainly.com/question/1852006

#SPJ1

The capacity of an object is measured by its volume. For instance, a cup's capacity is stated to be 100 ml if it can hold 100 ml of water in its brim. Here ice cube has particles that can be drawn closer to occupy smaller volume. The correct option is D.

Due to the strong intermolecular interactions, the solid molecules are very near to one another. Solids have a low volume and a high density as a result. Additionally, the solid molecules cannot be easily crushed due to the narrow intermolecular distance.

So here ice cube has small volume.

Thus the correct option is D.

To know more about volume, visit;

https://brainly.com/question/13807002

#SPJ1

Running blades is the controversial prosthetics which may confer an athletic advantage over able-bodied runners.

This is also referred to as running prosthetics which allows someone move faster with less effort.

This happens when top speed has been achieved and offers an advantage over able-bodied runners.

Read more about Prosthetics here https://brainly.com/question/24070696

#SPJ1

The two chemical compounds are not the same, because their ratio is not equal. In both samples the composition of lead and oxygen is different.

A chemical compound is a substance made of numerous similar molecules (or molecular entities) joined by chemical bonds and comprising atoms from various chemical elements. Therefore, a molecule made up of only one type of atom is not a compound. Chemical reactions, which may entail interactions with other molecules, can change a compound into a distinct substance. Atomic bonds may be broken or new ones created during this process.

sample 1 = mass of lead / mass of oxygen = 12.92g/2g = 6.46 .

sample 2 = mass of lead/ mass of oxygen = 34.27 - 14.39/14.39 = 1.38 .

so, the ratios are not the same.

Hence, the two chemical compounds are not the same, because their ratio is not equal. In both samples the composition of lead and oxygen is different.

To know more about Chemical compounds, check out:

https://brainly.com/question/26487468

#SPJ1

Answer:

non polar and neutral polar and neutral acidic and polar basic and polar

There are 5.79 x 10²¹ representative particles in 2.62g of the molecular compound.

Determine the number of moles of the molecular compound.

We can use the formula:

moles = mass / molar mass

where mass is 2.62g and molar mass is 273g/mol.

moles = 2.62g / 273g/mol

moles = 0.00961 mol

Use Avogadro's number to convert from moles to representative particles.

We can use the formula:

representative particles = moles x Avogadro's number

where Avogadro's number is 6.022 x 10²³.

representative particles = 0.00961 mol x 6.022 x 10²³

representative particles = 5.79 x 10²¹

To know more about molar mass, here

brainly.com/question/22997914

#SPJ4

If the students look out a window for 5 min. and record the number of vehicles that pass, the type of vehicle and color of the vehicle, then the students are observing (Option D is correct).

The scientific method is a series of sequential steps by which we can collect empirical evidence about a scientific question, and it involves observation and experimentation.

In conclusion, If the students look out a window for 5 min. and record the number of vehicles that pass, the type of vehicle and color of the vehicle, then the students are observing (Option D is correct).

Learn more about the scientific method here:

https://brainly.com/question/17216882#

#SPJ1

Sally is wrong because copper is less electropositive than hydrogen, thus, can not displace hydrogen from dilute acids.

The reactions to prepare copper (ii) chloride are:

the chlo­ri­na­tion of cop­per sul­fide at a high tem­per­a­ture

reaction of copper (ii) oxide with dilute hydrochloric acid

The equations of the given reactions are as follows:CuS + Cl₂ ---> CuCl₂ + SCuO + 2HCl ----> CuCl₂ + H₂O

Reactive metals are metals that readily give up their electrons to form positive ions.

Reactive metals displace hydrogen from dilute acids. They are found in group 1A and 2A of the periodic table. Copper is not a reactive metal and will not displace hydrogen from acids.

Learn more about reactive metals at: https://brainly.com/question/20273277

#SPJ1

Sally is wrong because copper chloride is not made from the reaction of copper and dilute hydrochloric acid.

2. Copper (ii) chloride can be prepared as follows:

3. the equations of the reaction are:

Single replacement reactions are reactions in which a more reactive atom replaces another atom in a compound.

An example of a single replacement reaction is the reaction of chlorine gas with copper sulfide at high temperatures to form copper chloride.

Learn more about single replacement reaction at: https://brainly.com/question/20216315

#SPJ1

Answer:

Density = M/V

so 3.81/14.3 .266g/ml

Explanation:

Approximately 194.0 grams of glucose (C6H12O6) would be required to prepare a 5000 mL solution with a concentration of 0.215 M.

To determine the mass of glucose (C6H12O6) required to prepare a 0.215 M solution in 5000 mL, we need to use the formula:

Molarity (M) = moles of solute / volume of solution (in liters)

First, let's convert the volume of the solution from milliliters (mL) to liters (L):

5000 mL = 5000/1000 = 5 L

Now, we can rearrange the formula to solve for moles of solute:

moles of solute = Molarity (M) x volume of solution (L)

moles of solute = 0.215 M x 5 Lmoles of solute = 1.075 mol

Since glucose (C6H12O6) has a molar mass of approximately 180.16 g/mol, we can calculate the mass of glucose using the equation:

mass of solute = moles of solute x molar mass of solute

mass of glucose = 1.075 mol x 180.16 g/mol

mass of glucose = 194.0 g (rounded to three significant figures)

Therefore, approximately 194.0 grams of glucose (C6H12O6) would be required to prepare a 5000 mL solution with a concentration of 0.215 M. It's important to note that the molar mass of glucose used in this calculation may vary slightly depending on the level of precision required.

For more such questions on glucose visit:

https://brainly.com/question/397060

#SPJ8

Answer:

72.6% Error

Explanation:

% error = \(\frac{Real-Measured}{Real} * 100\)

\(\frac{58.44-16}{58.44} *100= 72.6\)

58.44 is the weight of NaCl

The answer is: The electronic configuration of Nitrogen is \(1s^22s^22p^3\).

Electronic configuration: The electronic configuration is defined as the distribution of electrons of an atom in the atomic or molecular orbitals and is written using the labels for the subshell.

How to decide which orbital is filled first?

(Shown in image)

         \(1s^22s^22p^3\)

To learn  more about the electronic configuration, visit:

https://brainly.com/question/21977349

#SPJ4

Nitrogen's complete electron configuration is 12s2s22p3.

The shorthand electron configuration for noble gases is [He] 2s22p3. Nitrogen has an atomic number of 7. The nitrogen atoms' nucleus contain this many protons. An atom that is neutral has an equal number of protons and electrons. Thus, the ground state electron configuration will consist of 7 electrons in the suitable s and p orbitals (state of lowest energy). For nitrogen, the entire electron configuration is 1s22s22p. Scientists may easily express and explain how the electrons are organized around the nitrogen atom's nucleus by using the configuration notation for nitrogen (N). As a result, it is simpler to comprehend and forecast how atoms will cooperate to form chemical bonds.

Learn more about electronic configuration here-

https://brainly.com/question/11309892

#SPJ9