1. You are an Associate Professional working in the Faculty of Engineering and a newly appointed technician in the Mechanical Workshop asks you to help him with a task he was given. The department recently purchased a new 3-phase lathe, and he is required to wire the power supply. The nameplate of the motor on the lathe indicated that it is delta connected with an equivalent impedance of (5+j15) 2 per phase. The workshop has a balanced star connected supply and you measured the voltage in phase A to be 230 D0° V. (a) Discuss three (3) advantage of using a three phase supply as opposed to a single phase supply (6 marks) (b) Draw a diagram showing a star-connected source supplying a delta-connected load. Show clearly labelled phase voltages, line voltages, phase currents and line currents. (6 marks) (c) If this balanced, star-connected source is connected to the delta-connected load, calculate: i) The phase voltages of the load (4 marks) ii) The phase currents in the load (4 marks) iii) The line currents (3 marks) iv) The total apparent power supplied

The RPM of the single-acting compressor is 300 revolutions per minute if the stroke is 8 inches and the piston speed is 400 feet per minute.

RPM is an abbreviation for revolutions per minute which is used to indicate the speed of a thing by determining how many times it turns one complete circle during one minute.

To determine the RPM in this case, we use the formula for piston speed as follows;

Piston speed = ( 2 × Stroke × RPM ) ÷ 12

As the stroke is given to be 8 inches and the piston speed is given to be 400 feet per minute, substituting these values in the equation as follows;

400 = ( 2 × 8 × RPM ) ÷ 12

400 × 12 = 16 × RPM

4800 = 16 × RPM

RPM = 4800 ÷ 16

RPM = 300

Therefore this single-acting compressor is determined to have 300 revolutions per minute.

To learn more about RPM; click here:

https://brainly.com/question/11801946

#SPJ4

Answer:

Future Business Leaders of America

Explanation:

Because your readers frequently have their own interpretations of the terms or are completely unfamiliar with them, the "Definitions of Terms" section ensures that they will understand the components of your study in the order in which you will be presenting them.

Icon: What is it?

The majority of people in today's technologically advanced world understand the term "icon" to mean a small, selectable or unselectable image that, in a computer's graphical user interface (GUI), or online, represents or points to something else.

The original and other definition of icon, which is still in use today, is a person or thing that is greatly admired, especially for having significant influence or significance in a particular field.

Greek eikn or eikenai, meaning "to seem or appear," is where the word icon first appeared.

To learn more abut GUI refer to:

https://brainly.com/question/22811693

#SPJ4

Answer:

Object-Oriented Software Engineering Using UML, Patterns, and Java, 3e, shows readers how to use both the principles of software engineering and the practices of various object-oriented tools, processes, and products.

Based on the fact that Megan arranged the machines according to their functions, this is Process layout. Thus, option A is correct.

This is the way of arranging a shop or factory where the machines and equipment are arranged according to their function.Megan arranged her machines according to how they function so that she can be able to move from one station to another. This is therefore a process layout.

In the process layout, similar processes are grouped together, and machines are arranged according to the production process. This type of layout is ideal for factories that produce a variety of products with different production requirements, as it allows for flexibility in production.

In a heavy machine tools factory, various machines with different production requirements are used, and a process layout would allow for efficient use of resources and flow of materials.

Find out more on process layouts at:

brainly.com/question/14409617.

#SPJ4

Answer:

rotation

Explanation:

I just answered this!

To determine the minimum bit rate of an ADC (Analog-to-Digital Converter) with a 1000-level quantizer and a bandwidth of 20 kHz, the minimum bit rate from this ADC is 400 kHz.

In this case, the signal has a bandwidth of 20 kHz, so the minimum sampling rate required is 2 times the bandwidth, which is 2 * 20 kHz = 40 kHz. The minimum sampling rate corresponds to the minimum bit rate.

To convert an analogue signal with a 20 kHz bandwidth to a binary format using a 1000-level quantizer, each level of the quantizer requires a certain number of bits. Since there are 1000 levels, we need at least log2(1000) bits to represent each level. Rounded up to the nearest integer, log2(1000) is 10.

Therefore, the minimum bit rate of the ADC is the product of the minimum sampling rate and the number of bits per sample:

Minimum bit rate = Minimum sampling rate * Number of bits per sample

                = 40 kHz * 10 bits

                = 400 kHz

Hence, the minimum bit rate from this ADC is 400 kHz.

Learn more about analogue signal here: https://brainly.com/question/33183802

#SPJ11

4 netherite scrap and 4 gold

in a crafting table

Answer: Hello your question is incomplete attached below is the complete question

answer : V(out) (t) = 1 - e^-100t

Explanation:

The equation of the output voltage as a function of time assuming at t = 0 switch closes and capacitor will be discharged when t < 0

V(out) (t) = 1 - e^-100t

attached below is the step by step explanation  

Answer: what’s the answer

Explanation:

JdjdjdjdjdjdjdjieeowojwjkgkfkjGCZxhlkVzljhdKLHagdfpojglKVldjnCBa

kehrgpiyfealuydvasljfnVjlehgrPIYgefioyGlihv

Answer:

Batteries

Explanation:

They include a lot of radiation in them

Answer:

Explanation:

Given that,

The area of glass \(A_g\) = \(0.11m^2\)

The thickness of the glass \(t_g=4mm=4\times10^-^3m\)

The area of the styrofoam \(A_s=11m^2\)

The thickness of the styrofoam \(t_s=0.20m\)

The thermal conductivity of the glass \(k_g=0.80J(s.m.C^o)\)

The thermal conductivity of the styrofoam  \(k_s=0.010J(s.m.C^o)\)

Inside and outside temperature difference is ΔT

The heat loss due to conduction in the window is

\(Q_g=\frac{k_gA_g\Delta T t}{t_g} \\\\=\frac{(0.8)(0.11)(\Delta T)t}{4.0\times 10^-^3}\\\\=(22\Delta Tt)j\)

The heat loss due to conduction in the wall is

\(Q_s=\frac{k_sA_s\Delta T t}{t_g} \\\\=\frac{(0.010)(11)(\Delta T)t}{0.20}\\\\=(0.55\Delta Tt)j\)

The net heat loss of the wall and the window is

\(Q=Q_g+Q_s\\\\=\frac{k_gA_g\Delta T t}{t_g}+\frac{k_sA_s\Delta T t}{t_g}\\\\=(22\Delta Tt)j +(0.55\Delta Tt)j \\\\=(22.55\Delta Tt)j\)

The percentage of heat lost by the window is

\(=\frac{Q_g}{Q}\times 100\\\\=\frac{22\Delta T t}{22.55\Delta T t}\times 100\\\\=97.6 \%\)

Given block diagram in Figure 1. Figure 1 Block Diagram We have to simplify the given block diagram and obtain its overall transfer function.

The simplified block diagram is shown in Figure 2. Figure 2 Simplified Block Diagram From the simplified block diagram, we can write the overall transfer function of the given block diagram as follows:

\(\[H(s)=\frac{Y(s)}{R(s)}=\frac{G_1(s)\times G_2(s)\times G_3(s)}{1+G_1(s)\times G_2(s)\times G_3(s)\times H_1(s)}\].\)

\(where \[G_1(s)=\frac{2}{s+2}\] \[G_2(s)=e^{-5s}\] \[G_3(s)=\frac{1}{s+10}\] and \[H_1(s)=1\].\)

Substituting the given values, we get\(\[H(s)=\frac{\frac{2}{s+2}\times e^{-5s}\times \frac{1}{s+10}}{1+\frac{2}{s+2}\times e^{-5s}\times \frac{1}{s+10}\times 1}\] \[\Rightarrow H(s)=\frac{2e^{-5s}}{(s+2)(s+10)+2e^{-5s}}\] .\)

Therefore, the overall transfer function of the given block diagram is \(\[H(s)=\frac{2e^{-5s}}{(s+2)(s+10)+2e^{-5s}}\]\).

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

Answer:

True

Explanation:

Atmospheric science is studying of the Earth's atmosphere. Meteorology includes atmospheric chemistry and atmospheric physics with a major focus on weather forecasting.

Answer:

The other person is Correct the answer is true

Explanation:

Answer:

I don't know sorry thanks for asking

It is okay to lift one end of the vehicle B) As long as the wheels have been chocked.

This refers to the processes that are undertaken in order to undertake a task safely, both for the person executing the task and others around.

Hence, we can see that It is okay to lift one end of the vehicle B) As long as the wheels have been chocked

This is because it would enable the vehicle to be safely positioned so the wheels would not roll off and cause an accident.

This safety procedure allows a person to raise one end of a vehicle, if the wheels have been chocked, to keep them in place.

Read more about safety procedures here:

https://brainly.com/question/14367881

#SPJ1

Answer:

Fire extinguishers controls the amount of pollution caused by smoke and burning. Although they have no expiring date, they won't last forever. Extinguishers should work for 5 to 15 years, but fire extinguishers be routinely maintained to make sure they remain effective.

Explanation:

BRAINLEST PLZ

Answer:

Fire extinguishers control the amount of pollution caused by smoke and burning. Although they have no expiring date, they won't last forever. Extinguishers should work for 5 to 15 years, but fire extinguishers are routinely maintained to make sure they remain effective.

Answer:

International Film Festival

Judging the best best film:

a. The probability that out of five judges (random sample),  three are in favor of film FA is:

= 33%.

b. The demerits of classical probability are:

1. Classical probability can only be used with events that have definite numbers of possible outcomes.  

2. Classical probability can only handle events where each outcome is equally likely.

3. Classical probability is based on the assumption of linear relationship (which is not always true in real life) between the latent variable and observed scores.

Explanation:

a) Number of judges = 11

Number of judges in favor of FA film = 6

Number of judges in favor of FB film = 5

Probability of judges in favor of FA film = 6/11

Probability of judges in favor of FB film = 5/11

Random sample of judges = 5

Probability that out of five judges, three are in favor of film FA = 3/5 * 6/11

= 18/55

= 33%

b) Classical probability is the simple probability showing that each event has equal chance of happening.  It can be contrasted with empirical probability that is obtained from experiments.

The total magnification of a 10x ocular lens and a 100x objective lens is 1000x. To calculate this, simply multiply the magnification of the ocular lens (10x) by the magnification of the objective lens (100x) : 10 x 100 = 1000.

The total magnification of the 10 x ocular lens and the 100 x objective lens can be used to view objects in greater detail than what can be seen with the na-ked eye.

The combination of these magnifications can reveal details that would otherwise be impossible to see, such as the structure of cells and even individual molecules.

Learn more about total magnification

https://brainly.com/question/25779311

#SPJ4

A(n) aside is an actor speaking briefly to the audience while the other characters are unaware of it.

In drama or theater, an aside is a theatrical technique where a character directly addresses the audience, usually speaking in an undertone or in a lower volume compared to normal dialogue. The purpose of an aside is to provide the audience with insights into the character's thoughts, feelings, or intentions, often revealing information that is not shared with other characters on stage. Asides allow the audience to gain a deeper understanding of the character's perspective or provide a comedic effect through a witty remark or commentary.

The purpose of an aside is to offer the audience additional information that is not shared with the other characters on stage. By addressing the audience, the character can reveal their true thoughts, provide context to a situation, or express emotions that are not expressed in their interactions with other characters. This technique allows the audience to gain a deeper understanding of the character's perspective, motivations, or hidden agenda.

Asides can serve various dramatic purposes. They may be used to create dramatic irony, where the audience is aware of something that the other characters are not. This creates tension or anticipation as the audience watches events unfold. Asides can also provide a comedic effect by allowing the character to deliver witty remarks, sarcastic comments, or humorous observations directly to the audience.

You can learn more about A(n)aside at: https://brainly.com/question/1380371

#SPJ11

Constructive interference results in larger waves, while destructive interference produces smaller waves.

Interference is the phenomenon that occurs when two or more waves meet and interact with each other. Constructive interference and destructive interference are two types of interference that have different effects on the resulting waves.

Constructive interference occurs when two waves align in such a way that their crests (or troughs) overlap, reinforcing each other. This reinforcement leads to an increase in the amplitude of the resulting wave. As a result, constructive interference produces larger waves as the amplitudes add up.

On the other hand, destructive interference occurs when two waves align in a way that their crests align with the troughs. In this case, the waves cancel each other out, resulting in a decrease in amplitude. Consequently, destructive interference produces smaller waves as the amplitudes subtract from each other.

Learn more about Constructive interference here:

https://brainly.com/question/31857527

#SPJ11

The warning limit is a value two standard deviations above (or two standard deviations below) the mean. If there is a control chart, if the reading is within the warning limits, "Take another sample."

The purpose of adding warning limits or dividing the control chart into zones is to give early notification when something goes wrong. Instead of immediately initiating process improvement to determine if a particular cause exists, quality engineers should temporarily reduce the sampling rate of the process output until it becomes clear that the process is truly under control. can be increased to.

Control limits are horizontal lines on a control chart that represent the upper and lower limits of the acceptable range of process results. When the plotted data exceeds the control limits. This indicates a natural variation of the process under controlled conditions.

A control chart always has a middle line representing the mean, an upper line representing the upper control limit, and a lower line representing the lower control limit. These rows are determined from historical data.

Learn more about Control chart limit :

brainly.com/question/26478724

#SPJ4

A pediatrician would use an ophthalmoscope for viewing the interior of the eyes.

Ophthalmoscope is an instrument used by pediatricians and other physicians to examine the interior of the eye.

The ophthalmoscope, an important diagnostic tool in ophthalmology, enables doctors to view the retina, optic disc, macula, and other parts of the eye in detail.

The ophthalmoscope is designed to allow physicians to view the interior of the eye through the pupil. With the help of an ophthalmoscope, doctors can diagnose and monitor a variety of eye disorders, such as glaucoma, cataracts, and macular degeneration.

Learn more about ophthalmoscope at:

https://brainly.com/question/30588197

#SPJ11

A pediatrician is a doctor who specializes in treating babies, toddlers, and children up to the age of 18. Pediatricians are well-equipped to diagnose, treat, and illnesses. Because they deal with such young patients, pediatricians must have access to a variety of specialized medical instruments,

One such instrument is an ophthalmoscope. An ophthalmoscope is a handheld instrument that is used to view the interior of the eye. It allows doctors to examine the retina, optic disc, and other structures of the eye to identify any signs of damage or disease.
Pediatricians might use an ophthalmoscope to diagnose a variety of eye conditions in children. For example, they might use it to look for signs of strabismus (a misalignment of the eyes), cataracts (cloudy areas on the lens of the eye), or glaucoma (increased pressure in the eye that can damage the optic nerve)
In addition to an ophthalmoscope, they might also use other specialized instruments to examine different parts of the eye.

To know more about ophthalmoscope visit:

https://brainly.com/question/32369879

#SPJ11

The camshaft position sensor (CPS) in an electronic ignition system serves a vital function by monitoring the position and rotational speed of the camshaft. It provides real-time data to the Engine Control Module (ECM), which is responsible for optimizing engine performance.

The primary purpose of the CPS is to determine the precise moment when the fuel injectors should be activated and the spark plugs should fire, ensuring accurate timing for combustion. This process is essential for maintaining the efficiency and smooth operation of the engine. By continuously monitoring the camshaft's position, the sensor aids in reducing exhaust emissions, improving fuel economy, and preventing engine misfires or stalling. Furthermore, the camshaft position sensor enables the ECM to synchronize the operation of the fuel injectors with the opening and closing of the engine's intake and exhaust valves. This synchronization helps to optimize the combustion process and contributes to the overall performance of the vehicle. In conclusion, the camshaft position sensor plays a critical role in the electronic ignition system by providing essential information for fuel injection and ignition timing. It ensures optimal engine performance, fuel efficiency, and reduced emissions, contributing to the reliable operation of the vehicle.

Learn more about Engine Control Module here-

https://brainly.com/question/12598777

#SPJ11

Both technicians have valid points. Either the oil pressure relief valve is stuck closed or there is excessive clearance between the oil pump gears that's causing the engine to have lower-than-specified oil pressure. The oil pump is an important component of the engine lubrication system.

It's responsible for supplying oil to the engine, which helps reduce friction between moving engine parts. If the oil pressure is low, it can cause significant engine damage. Low oil pressure can be caused by several issues, including worn-out bearings, clogged oil passages, and a malfunctioning oil pump. When the oil pressure is low, the engine's warning light will come on. The oil pressure relief valve is a component in the oil pump that controls oil pressure. If it's stuck closed, oil pressure will build up and cause low oil pressure. Technician A's diagnosis is correct.

On the other hand, Technician B is also correct. If there's excessive clearance between the oil pump gears, the oil pump will not be able to produce enough pressure to circulate oil throughout the engine. This is because the gears are not properly meshing with each other. In summary, both technicians have valid diagnoses and should be able to identify the root cause of the low oil pressure in the engine.

To know more about technicians visit :

https://brainly.com/question/14290207

#SPJ11

The velocity of the water flowing through the 6-inch diameter pipe is approximately 204.1 ft/s.

Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.

The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

To determine the velocity of the water flowing through the 6-inch diameter pipe, we can use the following formula:

Q = A * V

Where Q is the flow rate (600 lb/min), A is the cross-sectional area of the pipe, and V is the velocity of the water.

The cross-sectional area of the pipe is:

A = π * \(r^2\)

A = π * \((0.25 ft)^2\)

A = 0.049 \(ft^2\)

Now we can solve for the velocity:

V = Q / A

V = 600 lb/min / 0.049\(ft^2\)

V = 12245.9 ft/min

Finally, we can convert the velocity to feet per second (ft/s) by dividing by 60:

V = 12245.9 ft/min / 60

V ≈ 204.1 ft/s

Therefore, the velocity of the water flowing through the 6-inch diameter pipe is approximately 204.1 ft/s.

For more details regarding velocity, visit:

https://brainly.com/question/17127206

#SPJ9

The path loss in between the mobiles base stations, and urban area cellular radio is 136.47 dB

An equation is an expression that shows the relationship between two or more numbers and variables.

Given the equation:

LdB = 20 log(f) + 10n log(d) − 147.56dB

f is the frequency, d is the distance.

Given that f = 1.9 GHz = 1.9 * 10⁹ Hz, d = 1.5 km = 1500 m, n = 3.1. Hence:

L = 20 log(1.9 * 10⁹) + 10(3.1) * log(1500) − 147.56

L = 136.47 dB

The path loss in between the mobiles base stations, and urban area cellular radio is 136.47 dB

Find out more on equation at: https://brainly.com/question/2972832

Answer:

See attachment

Explanation:

The attached picture shows a problem identical to this one except the diameter of the balloon is defined. The provided problem can be solved in terms of the balloon's diameter using the same procedure.