A 3-phase generator with reactance of 15% on its rating of 22.5 MVA at 16 kV (line), feeds into a 16/132 kV step-up transformer with reactance of 10% on its rating of 25 MVA. Calculate the short-circuit current in kA and also in MVA for a 3-phase fault on (a) the generator terminals and (b) the 132kV terminals for the step-up transformer.
Answers
A three-phase generator with reactance of 15% on its rating of 22.5 MVA at 16 kV(line), feeds into a 16/132 kV step-up transformer with reactance of 10% on its rating of 25 MVA.
We are required to calculate the short-circuit current in kA and also in MVA for a 3-phase fault on (a) the generator terminals and (b) the 132kV terminals for the step-up transformer.
Let us calculate the short circuit current in kA for a 3-phase fault on the generator terminals as follows:I SC generator = V g/X gHere,V g = 16 kVX g = 15% of 22.5 MVA = 0.15 × 22.5 × 1000000/3 × (16 × 1000)2= 0.146 ΩI SC generator = V g/X g= 16 × 1000/0.146= 109.5 kA
Therefore, the short circuit current in kA for a 3-phase fault on the generator terminals is 109.5 kA. Let us calculate the short circuit current in kA for a 3-phase fault on the 132kV terminals for the step-up transformer as follows:I SC transformer = V T/X THere,V T = 132 kVX T = 10% of 25 MVA = 0.1 × 25 × 1000000/3 × (132 × 1000)2= 0.015 ΩI SC transformer = V T/X T= 132 × 1000/0.015= 8.8 kA
Ans: Therefore, the short circuit current in kA for a 3-phase fault on the 132kV terminals for the step-up transformer is 8.8 kA.Let us now calculate the short circuit MVA on generator terminals as follows:I SC generator = V g/Z SCg Z SCg = V g/I SC generator = 16 × 1000/109.5 × ∠0o= 146.1 ∠-8.5o ΩS SCG = 3 × V g × I SC generator= 3 × 16 × 1000 × 109.5 × ∠8.5o/1000000= 7.53 MVA
Ans: Therefore, the short circuit MVA on generator terminals is 7.53 MVA. Let us now calculate the short circuit MVA on the 132kV terminals for the step-up transformer as follows:I SC transformer = V T/Z SCtZ SCt = V T/I SC transformer = 132 × 1000/8.8 × ∠0o= 15000 ∠90o ΩS SCT = 3 × V T × I SC transformer= 3 × 132 × 1000 × 8.8 × ∠-90o/1000000= 3.68 MVA Ans: Therefore, the short circuit MVA on the 132kV terminals for the step-up transformer is 3.68 MVA.
To learn more about generators:
https://brainly.com/question/12841996
#SPJ11
Related Questions
Consider the following instance variable and method.
private int[] numbers;
/* Precondition: numbers contains int values in no particular order. /
public int mystery(int num)
{
for (int k = numbers.length − 1; k >= 0; k−−)
{
if (numbers[k] < num)
{
return k;
}
}
return -1;
}
Which of the following best describes the contents of numbers after the following statement has been executed?
int m = mystery(n);
a. All values in positions 0 through m are less than n.
b. All values in positions m+1 through numbers.length-1 are less than n.
c. All values in positions m+1 through numbers.length-1 are greater than or equal to n.
d. The smallest value is at position m.
e. The largest value that is smaller than n is at position m.
Answers
E. The largest value that is smaller than n is at position m because the mystery() method returns the position of the largest value that is smaller than n. The method iterates through the array. variables are used.
A variable is a named storage location in a computer program that holds a value that can be changed during the execution of the program. Variables are used to store data and information that can be used throughout the program. Variables can be declared and assigned values in a variety of ways, depending on the programming language being used. Variables can be of different types, such as integers, strings, floats, and booleans. Each type of variable has a different set of characteristics and can be used for different purposes. For example, an integer variable can store a whole number, while a string variable can store a sequence of characters. Variables can also be declared as constants, which means that their value cannot be changed during the execution of the program.
Learn more about Variables here
https://brainly.com/question/21860989
#SPJ4
3. Assertive communication means:
A. Confidently and directly communicating what you think and feel, without being aggressive
or passive
B.O Confidently saying what you think and feel, even If It means overshadowing someone
else's feelings
C.O Saying what you think and feel only If and when the other party gives you permission to
do so
D. None of the above
Answers
Answer:
A. Confidently and directly communicating what you think and feel, without being aggressive or passive.
Explanation:
Assertive communication is the ability to express both positive and negative ideas in a way that it is a honest and direct message. It doesn't mean to say things to the other person with the intent of causing harm or making them feel better, it's just saying things as they are.
genetically engineered organisms represent the highest percentage of which crop grown in the united states?
Answers
Genetically engineered organisms represent the highest percentage of corn grown in the United States are Soybeans, cotton, and canola. Well they are also significantly genetically engineered crops.
Genetically engineered (GE) organisms, or genetically modified organisms (GMOs), are organisms whose genetic material has been altered through biotechnology. In the United States, the most prevalent GE crop is corn, with approximately 92% of corn being genetically engineered as of 2020.
This is followed by soybeans, cotton, and canola, with 94%, 94%, and 90% GE rates, respectively. GE crops are popular due to their increased resistance to pests, herbicides, and environmental conditions, as well as their ability to produce higher yields. These factors contribute to the widespread adoption of genetically engineered crops in the United States.
To know more about genetically modified organisms visit:
brainly.com/question/30094586
#SPJ11
Select the function that takes as its arguments the following: 1. an array of floating point values; 2. an integer that tells how many floating point values are in the array. The function should return as its value the sum of the floating point values in the array. Example: If the array that is passed to the function looks like this: then the function should return the value 27.9 float sum(float a[], int n) float sumAcc =0.0; int i; for (i=0;i
Answers
The C function float sum(float a[], int n) takes an array of floating-point values and an integer that tells how many floating-point values are in the array, and returns the sum of the floating-point values in the array.
The given C function takes as its arguments an array of floating-point values and an integer that tells how many floating-point values are in the array. The function should return as its value the sum of the floating-point values in the array.
The following is the C function code with comments:
```cfloat sum(float a[], int n){// This is a float function named "sum" that takes an array of floating-point values (a[]) and an integer value (n) as its arguments. float sumAcc = 0.0; // Declare a float variable named "sumAcc" and initialize it with 0.0. int i; // Declare an integer variable named "i". // The for loop is used to iterate through each element of the array and add them to the "sumAcc" variable.for (i = 0; i < n; i++){sumAcc += a[i];}return sumAcc; // The function returns the final value of "sumAcc".}```
Hence, the correct answer is: float sum(float a[], int n).
Learn more about C function: brainly.com/question/30771318
#SPJ11
Consider the table: a) Build a decision tree for the training set given above. It's urgent help plz
Answers
Explanation:
umm can you explain me what i have to answer
Which of the following may be required to inspect the construction works or progress? Construction Manager Lender Design Professional All of the above.
Answers
All of the above may be required to inspect construction works or progress, depending on the specific project and its requirements.
Construction Manager: A construction manager is responsible for overseeing and managing the construction project. They may conduct regular inspections to ensure that the work is being carried out according to the plans and specifications.
Lender: In some cases, a lender may have a financial stake in the construction project and may require inspections to monitor the progress and ensure that the funds are being used appropriately. They may hire third-party inspectors or rely on reports from other professionals involved in the project.
Design Professional: A design professional, such as an architect or engineer, may be involved in the project to develop the construction plans and specifications. They may also be responsible for inspecting the construction works to ensure that they conform to the design intent and meet the required standards.
In summary, all three roles - Construction Manager, Lender, and Design Professional - can play a part in inspecting construction works or progress to ensure compliance, quality, and adherence to project requirements.
When in regular operation, ash and other debris should be removed _______ from the combustion chamber of a wood-burning heater.
Answers
When in regular operation, ash and other debris should be removed daily from the combustion chamber of a wood-burning heater.
What is meant by a combustion chamber?A wood stove radiates heat as it warms up via the stove's top and walls. The nearby region is warmed by the radiant heat, which can also warm other areas of the house thanks to the natural airflow in the building.
Fans using electric or convection power can help move this heat around to warm a bigger space. Some wood stoves use a convection chamber that wraps around the firebox to combine radiant and convection heat into a single appliance. Cool air is drawn into this convection chamber where it is heated and then circulated once again around the space.
Ash and other debris should be taken out of a wood-burning heater's combustion chamber every day when it is in regular use.
To learn more about combustion chamber refer to;
https://brainly.com/question/7324023
#SPJ4
Air at 40°C flow steadily through the pipe shown in Fig. 1 below. If P1 = 40 kPa (gage), P2 = 10 kPa (gage), D = 3d, Patm ≅ 100 kPa, the average velocity at section 2 is V2 = 25 m/s, and air temperature remains nearly constant, determine the average speed at section 1.
Answers
Based on the average velocity at section 2, and the absolute pressures at both sectors, the average speed at section 1 is 2.226 m/s.
What is the average speed at section 1?Density at P₁:
= (40 + 100) / (0.287 x (40 + 273))
= 1.5585 kg/m³
Density at P₂:
= (10 + 100) / (0.287 x (40 + 273))
= 1.2245 kg/m³
The average speed at section 1 is:
= (Density at P₂ x d² x 25.5) / (Density at P₁ x 9d²)
= 2.226 m/s
Find out more on average velocity at https://brainly.com/question/17444459.
#SPJ1
Define ways in which you would go about networking to explore opportunities in your career field and obtain more information for yourself. If applicable, explain ways in which you have already done that and how you will expand going forward. Choose one person in your career field that you would like to have a conversation with. What do you think you can learn from this person?
Answers
Answer:
mmmmmm
Explanation:
ffmfmfmmfmfmmfmfmfmfmfmffmfmfmfmfmfmfmfmfmfmfmfmfffmmfmffmmmfmfmfmfmfmfmfmfffmfmfmfmfmfmmfmfmmfmfmfmfmfmfffmfmfffmfmfmfmffmmfmfmffmfmfmfmfffmfmfmfmfmmmmfmfmfmfmfmfmfmmmfmfmfmfmfmfmfmfmmfmfmfmfmfmfmfmfmfmfmffmfmfmfmfmfmmfmfmmmmmfmfmfmffmfmfmfmffmffmfm
a major system repair is being performed on an r22 appliance
Answers
If a major system repair is being performed on an R-22 appliance, one cannot "top off the unit with R-410A".
What is R-22 refrigerant?R-22 refrigerant is a hydrochlorofluorocarbon (HCFC) refrigerant that has been in use since the 1950s in residential and commercial air conditioning systems. R-22 refrigerant is also known as HCFC-22. It is an ozone-depleting substance and has been phased out in many countries due to its harmful effects on the environment. R-22 refrigerant is still widely used in older air conditioning systems, but it is becoming increasingly difficult to obtain as it is being phased out.
What is R-410A refrigerant?R-410A refrigerant is a hydrofluorocarbon (HFC) refrigerant that has been developed as a replacement for R-22 refrigerant. It is a more environmentally friendly refrigerant and does not harm the ozone layer. R-410A refrigerant is also known as HFC-410A. It is commonly used in newer air conditioning systems as a replacement for R-22 refrigerant. It is important to note that R-410A refrigerant cannot be used in air conditioning systems that are designed to use R-22 refrigerant.
The complete question:
A major system repair is being performed on an R-22 appliance. What cannot be done to recharge the appliance?Learn more about major system repair: https://brainly.com/question/30230009
#SPJ11
What is the primary reason traffic laws exist ?
Answers
Answer:
It's to ensure a driver's safety.
Which of these is the purpose of dye penetrant?
A) Protect a GMA (MIG) weld
B) Ensure a GMA (MIG) weld has proper depth
C) Ensure a spot weld has proper indent
D) Check for cracks
Answers
The purpose of a dye penetrant is to check for cracks. It is also called dye penetration inspection. The correct option is D).
What is a dye penetrant?Surface-breaking faults are frequently found using dye penetrant inspection (DPI). This non-destructive testing approach also cognized as liquid penetrant inspection (LPI), is a practical way to find surface faults that can cause surface discontinuities, such as cracks, porosity, laps, and seams. It is used to check surface cracks and breaking faults.
Therefore, the correct option is D), check for cracks.
To learn more about dye penetrants, refer to the link:
https://brainly.com/question/28481756
#SPJ1
what is the total horsepower rating of a series of commercial ceiling fans that draw 30 a at 220 v? (1 hp
Answers
Answer:
8.85 hp
Explanation:
1. The first thing we need to do is determine our knowns.
Knowns
Current = I = 30 AmpsVoltage = V = 220 VoltsPower = 1 hp =745.7 Watts = ? (What we're looking for)2. The equation we need to use is one that relates Current, Voltage, and Power to one another.
Power = Current × Voltage
P = IV
3. Plug in all knowns to the equation and solve for Power.
P = 30 A × 220 V = 6600 Watts (or W)
4. Finally, we need to convert Watts to Horsepower.
1 hp = 745.7 W
6600 W × (1 hp / 745.7 W) = 8.85 hp
4. A cylindrical specimen of a brass alloy 7.5 mm in diameter and 90.0 mm long is pulled in tension with a force of 6000 N; the force is subsequently released. a. Compute the final length of the specimen. b. Compute the final specimen length with the load is increased to 16,500 N and then released.
Answers
The elastic properties of the brass specimen enables it to return to its
original length when stressed below the yield strength.
The correct responses are;
4. a. The final length is 90.0 m.
b. The final length is 97.2 mm.
Reasons:
a. Diameter of the brass alloy = 7.5 mm
Length of the specimen = 90.0 mm
Force applied = 6000 N
The equation for the applied stress, σ, is presented as follows;
\(\sigma = \dfrac{Force \ applied}{Area \ of \ specimen} = \dfrac{6000 \, N}{\pi \cdot \left(\dfrac{7.5 \times 10^{-3}}{2} \, m} \right)^2 } \approx 135.81 \ \mathrm{MPA}\)
Depending on the cold working condition, 135.81 MPa is below the yield
strength, and the brass will return to its original condition when the force is
removed. The final length is remains as 90.0 m.
b. When the applied force is F = 16,500 N, we have;
\(\sigma = \dfrac{16,500\, N}{\pi \cdot \left(\dfrac{7.5 \times 10^{-3}}{2} \, m} \right)^2 } \approx 373.48\ \mathrm{MPA}\)
The stress found for the force of 16,500 N is above the yield stress of
brass, and it is therefore, in the plastic region.
From the stress strain curve, the strain can be estimated by drawing a line
from the point of the 373.48 MP on the stress strain curve, parallel to the
elastic region to intersect the strain axis, which gives a value of strain
approximately, ε = 0.08.
The length of the specimen is given by the formula; \(l_i = l_0 \cdot (1 + \epsilon)\)
Therefore;
\(l_i\) = 90 × (1 + 0.08) = 97.2
The final length of the specimen, \(l_i\) = 97.2 mm
Learn more here:
https://brainly.com/question/13259307
What kind of plan or development of road can be done to avoid traffic?
Answers
Answer: Breakdown Lanes
Reason: With breakdown lanes when a car needs to stop it can go to the backdown lane and fix its issue.
identifies potential new customers and preserves favorable business relationships with past customers
Answers
❎❎❎❎❎❎❎ sorry but that didn't help me that much
In the fully developed region of flow in a circular pipe, does the velocity profile change in the flow direction?
Answers
Answer:
No, the velocity profile does not change in the flow direction.
Explanation:
In a fluid flow in a circular pipe, the boundary layer thickness increases in the direction of flow, until it reaches the center of the pipe, and fill the whole pipe. If the density, and other properties of the fluid does not change either by heating or cooling of the pipe, then the velocity profile downstream becomes fully developed, and constant, and does not change in the direction of flow.
What are the four categories of engineering materials used in manufacturing?
Answers
Answer:
metals, composite, ceramics and polymers.
Explanation:
The four categories of engineering materials used in manufacturing are metals, composite, ceramics and polymers.
i) Metals: Metals are solids made up of atoms held by matrix of electrons. They are good conductors of heat and electricity, ductile and strong.
ii) Composite: This is a combination of two or more materials. They have high strength to weight ratio, stiff, low conductivity. E.g are wood, concrete.
iii) Ceramics: They are inorganic, non-metallic crystalline compounds with high hardness and strength as well as poor conductors of electricity and heat.
iv) Polymers: They have low weight and are poor conductors of electricity and heat
Wearing layers of clothing in cold weather is often recommended because dead-air spaces between the layers keep the body warm by reducing the heat loss from the body. Compare the rate of heat loss for a single, 13 mm thick layer of wool to three 3 mm thick layers separated by 2 mm air gaps. Since the air gaps are so small, treat the air as stationary (i.e., assume heat is being conducted through the air gaps). Use kwool = 0.07 W/m-K and kair = 0.02 W/m-K.
Answers
Answer:
Three 3 mm thick layers separated by 2 mm air gaps will provide more warmth
Explanation:
Given data :
K wool = 0.07 W/m-k
Kair = 0.02 W/m-k
i) calculating the rate of heat loss for a 13 mm thick layer of wool:
thickness = 13 mm = 0.013
Q1 = 7/13 ΔT w/m^2
ii) determining the rate of heat loss for three 3 mm thick layer of wool with 2 mm air gaps
Q2 = 23/70 ΔT w/m^2
When comparing the rate of heat loss for a single 13 mm thick layer of wool to three 3 mm thick layers separated by 2 mm air gaps it can be observed that three 3 mm thick layers separated by 2 mm air gaps will provide more warmth : Q1 > Q2
define a class named history with the following public interface: class history { public: history(int nrows, int ncols); bool record(int r, int c); void display() const; }; the constructor initializes a history object that corresponds to an arena with nrows rows and ncols columns. you may assume (i.e., you do not have to check) that it will be called with a first argument that does not exceed maxrows and a second that does not exceed maxcols, and that neither argument will be less than 1. the record function is to be called to notify the history object that a poisoned carrot has been dropped at a grid point that does not currently have a poisoned carrot. the function returns false if row r, column c is not within the bounds implied by the history constructor; otherwise, it returns true after recording what it needs to. this function expects its parameters to be expressed in the same coordinate system as an arena (e.g., row 1, column 1 is the upper-left-most position). the display function clears the screen and displays the history grid as the posted programs do. this function does clear the screen, display the history grid, and write an empty line after the history grid; it does not print the press enter to continue. after the display (that should be done somewhere else in the program). (note to xcode users: it is acceptable that clearscreen() just writes a newline instead of clearing the screen if you launch your program from within xcode, since the xcode output window doesn't have the capability of being cleared.)
Answers
The logical point where different software entities communicate is known as a public interface in computer science.
What is meant by public interface?The logical point where different software entities communicate is known as a public interface in computer science. A single computer, a network, or a variety of other topologies may be used for the entities to interact with one another.A class's public properties and methods (variables or fields you may read the values of or assign to) form its public interface (functions you can call). Therefore, the task is to develop something that is not a subclass of LinkedList.For instance, protected methods could be accessed by creating a subclass.Due to the fact that an interface is a contract meant to be utilized by other classes, interface methods are implicitly public in C#. Moreover, when you implement these methods, you have to declare them to be public rather than static.To learn more about public interface refer
https://brainly.com/question/14999753
#SPJ4
A circuit has two resistors in parallel, each resistor is 6 ohms. This circuit is connected to a single resistor of 6 ohms, to form a series-parallel circuit. What is the total resistance of the circuit?
Answers
The tatal resistance of the series-parallel circuit with two resistor connected in parallel which combination is connected in series to a single resistor is 9 ohms.
What is a resistance?
This can be defined as the opposition to current flow in a circuit.
To calculate the total resistance, first we need to find the total resistance of the parallel resistor.
For parallel,
R' = (R₁R₂)/(R₁+R₂)............Equation 1Where:
R' = Total resistance of the parallel resistor.
From the question,
Given:
R₁ = 6 ohmsR₂ = 6 ohmsSubstitute these values into equation 1
R' = (6×6)(6+6)R' = 3 ohms.Finally, we combine the effective parallel resistance in series to the single resistance to the the total resistance of the circuit.
Rt = R'+R₃.................. Equation 2Where:
Rt = Total resistance of the circuit.From the question,
R' = 3 ohmsR₃ = 6 ohmsSubstitute these values into equation 2
Rt = 3+6Rt = 9 ohms.Hence, the total resistance of the circuit is 9 ohms.
Learn more about resistance here: https://brainly.com/question/28135236
#SPJ1
you are designing a complete mix lagoon system to treat waste containing a non-conservative pollutant. The waste stream has a flow rate of 3,500 L/d and pollutant concentration of 20.0 mg/L. The pollutant decyas with a reaction rate coefficient of 0.50/ day.
Answers
Answer:
hgyvivihoy if he ogzrs go figure do it idydu
8. 15 A manual arc welding cell uses a welder and a fitter. The cell operates 2,000 hriyr. The welder is paid $30/hr and the fitter is paid $25/hr. Both rates include applicable overheads. The cycle time to complete one welded assembly is 15. 4 min. Of this time, the arc-on time is 25%, and the fitter's participation in the cycle is 30% of the cycle time. A robotic arc welding cell is being considered to replace this manual cell. The new cell would have one robot, one fitter, and two workstations, so that while the robot is working at the first sta tion, the fitter is unloading the other station and loading it with new components. The fitter's rate would remain at $25/hr. For the new cell, the production rate would be eight welded assemblies per hour. The arc-on time would increase to almost 52%, and the fitter's participation in the cycle would be about 62%. The installed cost of the robot and worksta tions is $158,000. Power and other utilities to operate the robot and arc welding equipment will be $3. 80/hr, and annual maintenance costs are $3,500. Given a 3-year service life, 15% rate of return, and no salvage value, (a) determine the annual quantity of welded assem blies that would have to be produced to reach the break-even point for the two methods. (b) What is the annual quantity of welded assemblies produced by the two methods work. Ing 2,000 hryr?
Answers
The annual quantity of welded assemblies that would have to be produced to reach the break-even point for the two methods is approximately 15,983.
To determine the break-even point between the manual arc welding cell and the robotic cell, we need to calculate the total costs for each method and then equate them.
For the manual arc welding cell:
Labor cost per hour = (welder's hourly rate x arc-on time) + (fitter's hourly rate x fitter's participation in the cycle) = ($30 x 0.25) + ($25 x 0.3) = $11.25
Labor cost per welded assembly = labor cost per hour x cycle time per assembly / 60 = $11.25 x 15.4 / 60 = $2.89
Overhead cost per welded assembly = (labor cost per hour x (1 - arc-on time - fitter's participation in the cycle)) x cycle time per assembly / 60 = ($30 x 0.45) x 15.4 / 60 = $4.68
Total cost per welded assembly = labor cost per welded assembly + overhead cost per welded assembly = $2.89 + $4.68 = $7.57
Total cost per hour = total cost per welded assembly x production rate = $7.57 x 8 = $60.56
Total cost per year = total cost per hour x hours of operation per year = $60.56 x 2,000 = $121,120
For the robotic arc welding cell:
Labor cost per hour = fitter's hourly rate x fitter's participation in the cycle = $25 x 0.62 = $15.50
Labor cost per welded assembly = labor cost per hour x cycle time per assembly / 60 = $15.50 x 15.4 / 60 = $3.97
Overhead cost per welded assembly = power and utility cost per hour + annual maintenance cost / production rate = $3.80 + $3,500 / (8 x 2,000) = $3.80 + $0.22 = $4.02
Total cost per welded assembly = labor cost per welded assembly + overhead cost per welded assembly + (installed cost / (production rate x service life)) = $3.97 + $4.02 + ($158,000 / (8 x 3)) = $3.97 + $4.02 + $6,208.33 = $14.19
Total cost per hour = total cost per welded assembly x production rate = $14.19 x 8 = $113.52
Total cost per year = total cost per hour x hours of operation per year = $113.52 x 2,000 = $227,040
To find the break-even point, we set the total cost of the manual arc welding cell equal to the total cost of the robotic arc welding cell and solve for the annual quantity of welded assemblies:
$121,120 + x($7.57) = $227,040 + x($14.19)
$7.57x - $14.19x = $227,040 - $121,120
$-6.62x = $105,920
x = $105,920 / $6.62
x = 15,982.7
Therefore, the annual quantity of welded assemblies that would have to be produced to reach the break-even point for the two methods is approximately 15,983.
Learn more about hourly rate here https://brainly.com/question/29335545
#SPJ4
application's of kirchoff's law
Answers
Technician A says that the current trend is to use remote power steering fluid reservoirs. Technician B says that using a remote reservoir allows for a more compact power steering pump assembly. Which technician is correct
Answers
Both technicians are correct: Technician A is correct that the current trend is to use remote power steering fluid reservoirs, and Technician B is correct that using a remote reservoir allows for a more compact power steering pump assembly.Remote power steering fluid reservoirs have become a trend due to their efficiency.
The power steering pump's function is to create pressure, so the power steering system works effectively. Therefore, it is necessary to avoid overheating of the fluid. The coolant is released from the pump into the rack and pinion steering or the gear steering box. The function of the fluid reservoir is to store and provide adequate fluid for the power steering pump.To facilitate the task, modern vehicles have remote fluid reservoirs. These reservoirs are used to store power steering fluid remotely. They're usually located in the fender or engine compartment.
The fluid is stored in a separate location, making the power steering system more compact. By removing the fluid from the pump housing, the chances of fluid foaming are reduced. Foaming of the fluid causes cavitation, which causes damage to the pump and reduces performance. Therefore, Technician B is right that using a remote reservoir allows for a more compact power steering pump assembly.
To know more about Technician visit :
https://brainly.com/question/14290207
#SPJ11
write an expression to detect that the first character of userInput matches firstLetter.
(language:C+)
Answers
it is important to ensure that userInput is a valid string before using this expression.
Here's an example expression in C++ to detect if the first character of userInput matches firstLetter
if (userInput[0] == firstLetter) {
// First character of userInput matches firstLetter
// Do something...
}
In this expression, userInput is a string variable representing user input, and firstLetter is a character variable representing the target first letter. The expression uses the index notation ([0]) to access the first character of userInput, and compares it with firstLetter using the equality operator (==). If the two characters match, then the code within the if statement will be executed.
Note that this expression assumes that userInput is a null-terminated string and that it has at least one character. If userInput is an empty string or if its length is less than one, then accessing its first character with userInput[0] will result in undefined behavior. Therefore, it is important to ensure that userInput is a valid string before using this expression.
Learn more about userInput here
https://brainly.com/question/14515880
#SPJ11
which other factors do you need to consider when preparing to move gondolas?
Answers
The factors that you need to consider when preparing to move gondolas are:
Heightwidthlength color. How do you move a gondola?In choosing gondola one need to look at some factor in decisions such as height.
Know that it is good to consider the construction material and also the center wall configuration for its building also.
The factors that you need to consider when preparing to move gondolas are:
Heightwidthlength color.Learn more about gondola from
https://brainly.com/question/10652274
#SPJ1
True or False. connection is the only direct connection between sender and receiver and is at the physical layer, where actual 1s and 0s are transmitted over wires or airwaves
Answers
The statement is true that the connection is the only direct connection between sender and receiver and is at the physical layer, where actual 1s and 0s are transmitted over wires or airwaves.
The physical layer is the first layer of the Open Systems Interconnection (OSI) model. It refers to the physical layer of the network's hardware. It communicates between devices and the physical layer of the network. It connects the sender and the receiver via a cable, and it transmits 1s and 0s over the airwaves. Bits are used to represent the data that is sent between the sender and the receiver. These bits are transferred using some physical medium or the other. This layer's primary objective is to provide an error-free and consistent data transmission rate. It is responsible for the transmission of data bits, which represent the actual data that must be sent across the network, from the sender to the receiver. This data is represented as 1s and 0s, which are transmitted using radio waves or wires. It ensures that the data reaches its intended destination in its original form. As a result, it is the only direct connection between the sender and the receiver.
Learn more about connection at:
https://brainly.com/question/27139436
#SPJ11
A smooth, flat plate of length l = 6 m and width b = 4 m is placed in water with an upstream velocity of U = 0.5 m/s. Determine the boundary layer thickness and the wall shear stress at the center and the trailing edge of the plate. Assume a laminar boundary layer
Answers
Answer:
At x = 3m , Tw = 0.0176 N/m^2
At x = 6m , Tw = 0.056 N/m^2
Explanation:
Here in this question, we are concerned with calculating the boundary layer thickness and the wall shear stress at the center and the trailing edge of the plate , assuming a laminar boundary layer.
Please check attachment for complete solution
what are the properties of advanced materials?
Answers
Sandpaper.
Rubble.
Pyramid.
Wrinkled.
Marbled.