A paper mill has installed three steam generators (boilers) to provide process steam and also to use some its waste products as an energy source. Since there is extra capacity, the mill has installed three 10-MW turbine generators to take advantage of the situation. Each generator is a 4160-V, 12.5 MVA, 60 Hz, 0.8-PF-lagging, two-pole, Y-connected synchronous generator with a synchronous reactance of 1.10 Q and an armature resistance of 0.03 Q. Generators 1 and 2 have a characteristic power-frequency slope of 5 MW/Hz, and generator 3 has a slope of 6 MW/Hz. i. If the no-load frequency of each of the three generators is adjusted to 61 Hz, evaluate the power that the three machines be supplying when actual system frequency is 60 Hz ii. Evaluate the maximum power that the three generators can supply in this condition without the ratings of one of them being exceeded. State the frequency of this limit. Estimate the power that each generator will supply at that point iii. Propose methods or actions that have to be done to get all three generators to supply their rated real and reactive powers at an overall operating frequency of 60 Hz.

Answer:

It seems there's no circuit diagram attached to the question. Please provide a circuit diagram or a more detailed question.

Answer:

A: development tool

Explanation:

Development tool helps support the implementation of software applications within a programming platform. Thus, the correct option for this question is A.

A Software application may be defined as a kind of computer program that significantly performs or operates a specific personal, educational, and business function with respect to the requirement of an individual.

In this modern era of technology, programming platforms develop new trends and ideas that are efficient and beneficial to consumers. These programming platforms implement software applications with the help and support of developmental tools.

Therefore, the option that helps support the implementation of software applications within a programming platform is known as the development tool. Thus, the correct option for this question is A.

To learn more about Programming platforms, refer to the link:

https://brainly.com/question/28465460

#SPJ2

Answer:

thats a really cool design or whatever you got there.

Explanation:

niceeeeeeee :)

The basic requirement of measurements is to have a standard or reference point against which to compare the quantity being measured. This standard or reference point should be well-defined and stable, and the measurement process should be repeatable and consistent. Additionally, it is important to ensure that the measurement equipment is calibrated and in good working condition.

Answer:

The most basic requirement for measurements is the presence of a standard or reference point against which the quantity being measured can be compared. The measurement process should be repeatable and consistent, and the standard or reference point should be well-defined and stable. Furthermore, ensure that the measurement equipment is calibrated and in good working order.

Explanation:

The velocity of the weights immediately before they hit the stack is 3.4672 ft/s

1 Lb = 0.453 kg

24 = 24 x 0.453

= 10.872kg

Therefore the m = 10.872

g = 9.87

m1 = 10.872/9.87

m1g = 1.112

T = 5 lb

= 5 x 0.453 = 2.265kg

m1g = T + 2T

1.112a = 10.872 - 3(2.265)

a = 3.66m/s²

initial velocity = 0

6x 2.54

= 15.24x10⁻²m

v² = 0+ 2as

v = √2as

v = √2x3.66x 15.24x10⁻²

= √1.1174

= 1.0571

a meter is equal to 3.28 ft

v*m = 1.0571 * 3.28

= 3.4672 ft/s

The velocity of the weights immediately before they hit the stack is  3.4672 ft/s.

Read more on velocity here: https://brainly.com/question/6504879

Answer:

s = v√[2(H - h)/g]

This formula describes the distance from the building that Prof Murthy must be when you release the egg

Explanation:

First, we need to find the time required by the egg to reach the head of Professor. For that purpose, we use 1st equation of motion in vertical form:

Vf = Vi + gt

where,

Vf = Velocity of egg at the time of hitting head of the Professor

Vi = initial velocity of egg = 0 m/s  (Since, egg is initially at rest)

g = acceleration due to gravity

t = time taken by egg to come down

Therefore,

Vf = 0 + gt

t = Vf/g   ----- equation (1)

Now, we use 3rd euation of motion for Vf:

2gs = Vf² - Vi²

where,

s = height dropped = H - h

Therefore,

2g(H - h) = Vf²

Vf = √[2g(H - h)]

Therefore, equation (1) becomes:

t = √[2g(H - h)]/g

t = √[2(H - h)/g]

Now, consider the horizontal motion of professor. So, the minimum distance of professor from building can be found out by finding the distance covered by the professor in time t. Since, the professor is running at constant speed of v m/s. Therefore:

s = vt

s = v√[2(H - h)/g]

This formula describes the distance from the building that Prof Murthy must be when you release the egg

The process of data processing by a computer involves several steps that take place in a specific order. The first step is inputting the data into the computer system. This can be done through various devices such as keyboards, scanners, or touchscreens. Once the data is entered into the computer, it is stored in the memory for further processing.

The second step is processing the data. This involves the use of the central processing unit (CPU) which performs mathematical and logical operations on the data. The CPU retrieves the instructions from the memory and executes them, which results in the desired output.

The third step is storing the output data. Once the CPU has processed the data, the result is stored in the memory. The output can be in various forms such as text, images, or sound.

The fourth step is displaying the output. The output is displayed on the screen, printer, or other output devices depending on the nature of the data and the desired format.

Finally, the last step is transmitting the output. If the output is required to be sent to another system or device, it is transmitted using various modes such as email, internet, or other networks.

Overall, these steps are followed in a sequential order to ensure efficient and accurate data processing by the computer. The speed and accuracy of the process depend on the hardware and software components of the computer system, as well as the complexity of the data being processed.

To know more about data processing visit:

https://brainly.com/question/30094947

#SPJ11

As an AI language model, I do not have a personal experience or background that I can bring to an engineering classroom. However, I can suggest some ways that you can bring a broad perspective to the engineering classroom. One way to do this is by sharing your own experiences and perspectives with your classmates

. If you come from a different cultural or educational background than your peers, you can share your unique insights on how engineering concepts are applied in your country or region. Another way to bring a broad perspective to the engineering classroom is by staying up-to-date with the latest technological developments and advancements. You can also read and discuss engineering journals or articles that offer diverse perspectives on engineering concepts. Lastly, you can invite guest speakers to the classroom who have expertise in engineering from different industries or fields. All of these strategies can help broaden the perspectives of engineering students and create a more inclusive and diverse learning environment.

To know more about perspectives visit:

https://brainly.com/question/11012390

#SPJ11

Answer:

Hi there

Your answer is:

B.

Explanation:

The "metal contraption", as the text goes on to say, is treated like a friend to Bonnie. Her mom comments on this by contrasting the metal contraption to a puppy.

Hope this helps

In a bearing cage, the wheel flange is part of the axle, which is supported by a single bearing assembly (usually a ball or cylindrical roller bearing style) near the flange end of the axle.

A wheel hub bearing, hub assembly, wheel hub unit, or hub and bearing assembly, the wheel hub assembly is a crucial part of your steering system contributing to the safe steering and handling of your vehicle.

Most wheel bearing assemblies include the following components: an outer race, an inner race, roller bearings or ball bearings, and a bearing cage in order to hold the rollers or balls in place.

Ball bearings are rolling-element bearings that use balls to maintain the separation and distance between the bearing races. They are designed to reduce rotational friction while supporting both radial and axial loads.

Therefore, in a bearing cage, the wheel flange is part of the axle, which is supported by a single bearing assembly (usually a ball or cylindrical roller bearing style) near the flange end of the axle.

To learn more about Bearing cage, refer to the link:

https://brainly.com/question/29324934

#SPJ1

The juice is then sent to a crystallizer where it is cooled and seeded with sugar crystals. The crystals grow in size and are separated from the liquid by centrifugation.

Crystallizer is a type of signal-processing technology most commonly used in audio production. It is designed to add clarity and definition to audio signals by emphasizing the frequencies which are most important to the signal. It works by amplifying the signal in the frequency domain and adding a process of resonance so that certain frequencies are emphasized, giving a more defined sound. Crystallizer is particularly useful in mastering, where it can bring out details and clarity that would otherwise be lost. It can also be used to enhance percussion instruments, making them more present in a mix.

The crystals are then dried and screened to obtain the desired size of sugar crystals. The remaining liquid is sent to a vacuum pan where it is boiled and evaporated until it reaches a concentration of 65% sucrose. The syrup is then cooled and crystallized to obtain the final product, which is refined sugar.

To learn more about crystallizers here:

brainly.com/question/13008800

#SPJ4

Answer:

Reduce manufacturing costs.

Explanation:

Hope This Helps

Have A Great Day

Explanation:

Elevator controller

An Elevator controller is a system to control the elevators, either manual or automatic. The controller usually tune down the voltage between 12V to 24V to the controlling system, Only the motor needs 3-phase power supply.

https://elevation.fandom.com › wiki

Elevator control system | Elevator Wiki | Fandom

Answer:

i)The results are consistent at ; Rows ( 1,2,4,6 ), which simply means that it is fairly consistent and makes sense

ii) Row 5 shows a gain of -99 which is ≈ -100 and there is a possibility of experimental error of (1%)

ii ) The omitted values are : row 3 = 0.99, Row 7 = 5.049

Explanation:

To calculate/determine the missing/omitted values we have to apply this formula:

Vo = ( V1 - V2 ) G

Vo = output = 1

G = gain = - 100

V1 =

we find  V1 along line 3 ( row 3 )

(V1 - V2) G = 1

( V1 - 1 ) * -100 = 1

hence V1 = 0.99

we find V2 along row 7

( V1 - V2 ) G = 1

( 5.10 - V2 ) * -100 = 1

hence V2 = 5.049

2% glutaraldehyde is a disinfectant that is often used. preferred agent for semi-critical objects that can't be exposed to such adaptable fiberoptic sigmoidoscopy.

The small incision medical procedure known as a sigmoidoscopy examines the large intestine from the rectum to the sigmoid colon, which is the closest portion of the colon. There are two different forms of sigmoidoscopy: rigid sigmoidoscopy employs a rigid equipment while flexible sigmoidoscopy uses a flexible endoscope. The chosen procedure is usually flexible sigmoidoscopy. Although they are not the same, a colonoscopy and a sigmoidoscopy are related procedures. While a colonoscopy looks at the entire big bowel, a sigmoidoscopy just looks at the sigmoid, which is the farthest portion of the colon. The doctor can view the interior of the large intestine from the rectum to the sigmoid, or left side of the colon, using flexible sigmoidoscopy. The process can be used by doctors to identify the source of constipation, abdominal pain, or diarrhea. In the descending colon and rectum, they also utilize it to check for benign and malignant polyps as well as early indications of cancer. The doctor can see intestinal bleeding, inflammation, abnormal growths, and ulcers in the descending colon and rectum during flexible sigmoidoscopy.

Learn more about sigmoidoscopy here

https://brainly.com/question/29573794

#SPJ4

The element of a time series known as a trend represents low-frequency variations in a time series after high and medium-frequency fluctuations have been removed through filtering. Plotting a linear relationship on a graph results in a straight line, but plotting a nonlinear relationship results in a curve.

What is a linear relationship?
No matter if a straight-line graph crosses the origin, the formal term for it is linear, and the relationship between the two variables is referred to as a linear relationship. A curved graph's relationship is referred to as non-linear in a similar way.

If you change one variable n times, it will affect the other variable n times in the same way. This is known as a linear relationship. To put it another way, both variables will double if you double one.

To learn more about a linear relationship, use the link given
https://brainly.com/question/29495734
#SPJ4

To ensure a process's address space is not violated with a paging configuration of 63 pages of 2048 words, the page table should be set up to map the logical addresses to physical addresses correctly.

Also the operating system should enforce access control to prevent unauthorized access to memory.

Paging is a memory management technique that allows a process's logical address space to be divided into fixed-sized pages, which are mapped to physical memory frames by a page table. To ensure that a process's address space is not violated, the page table should be set up correctly to map each logical page to a unique physical memory frame.

Additionally, the operating system should enforce access control by only allowing authorized processes to access specific memory locations, preventing unauthorized access to memory. By properly configuring the page table and enforcing access control, a process's address space can be protected from memory violations.

This question should be provided as:

For the following Paging configuration discuss, what must be done to ensure a processes address space is not violated:

Learn more about address space https://brainly.com/question/29308253

#SPJ11

The load-bearing structure of a building is made using laminated wood beams and columns as vertical members and horizontal members, respectively.

A beam is a horizontal part used in construction works that spans an opening and supports a weight, such as a stone or block wall above the entrance, in which case the beam is sometimes referred to as a ledge (see post-and-lintel system).

A beam structure, often known as a beam or a beams, is a type of framework used in the construction and engineering industries to create a safe and effective load route that evenly distributes weight across a building's base. The beams help to distribute the weight by not twisting while under pressure from the load.

To know more about Beam visit:

https://brainly.com/question/20369605

#SPJ4

Answer:

can you put it on english

Explanation:

Answer:

si

Explanation:

porque cell = excel !

A data warehouse is created specifically for data analytics, which includes scanning vast amounts of data to recognize patterns and relationships.

A database is used to collect and store data, including transactional information. Enterprise Data Warehouse (EDWH) is another name for Data Warehouse (DWH) (EDW). A data warehouse is a central location where information from one or more data sources is stored. Enterprise Data Warehouse (EDW), Operational Data Store (ODS), and Data Mart are the three primary types of data warehouses. A data warehouse acts as a repository for old information that may be analyzed. Data in a warehouse can be examined and evaluated using online analytical processing, or OLAP.

Learn more about data warehouse here:-

https://brainly.com/question/14615286

#SPJ4

The per-unit value of the leakage reactance for the voltage base is approximately 0.079.

In a transformer, the voltage and current on both sides are linked by the turns ratio, and the power delivered is the same on both sides. It's just like two coupled inductors. The leakage inductance of the transformer is defined as the inductance offered by the windings to the leakage flux, which is a part of the flux that doesn't link with the other winding. Given that a 13.8 kV/440 V, 50 kVA single-phase transformer has a leakage reactance of 300 ohms referred to the 13.8 kV side, we are required to determine the per-unit value of the leakage reactance for the voltage base.

The leakage reactance for the voltage base is given as follows:Xbase = (Vbase^2) / SbaseWhere,Vbase = 440V, Sbase = 50kVA.Xbase = (440^2) / 50Xbase = 3872ΩReferred to the high voltage side, the leakage reactance is given as:Referred to high voltage (HV) side:Xleakage (HV) = Xleakage (LV) (kVA base / kVA rating)^2Xleakage (HV) = 300Ω (50kVA/50kVA)^2Xleakage (HV) = 300Ω (1)^2Xleakage (HV) = 300ΩHence, the per-unit value of the leakage reactance for the voltage base,Xpu = Xleakage (HV) / XbaseXpu = 300Ω / 3872ΩXpu ≈ 0.079Therefore, the per-unit value of the leakage reactance for the voltage base is approximately 0.079.

Learn more about Leakage reactance here,A common model for a practical capacitor has a "leakage" resistance, RC, in parallel with an ideal capacitor, as shown ...

https://brainly.com/question/32250225

#SPJ11

The author is one who uses short history that highlight significant discoveries in replacement of tales.

The saying "luck is on the side of those who are prepared" implies that people who take the time to enhance their skills, knowledge, or abilities stand a better chance of experiencing favorable opportunities or results.

The author may employ anecdotes or narratives to accentuate this concept in the text. These stories may relate to people who had prepared themselves adequately for a specific circumstance, resulting in good fortune.

Learn more about   tales from

https://brainly.com/question/844214

#SPJ1

Your question seems incomplete, the probable question is:

In the story of "luck favored the prepared" explain how the author uses anecdotes, or stories.to illustrate key ideas of the passage.what is the main idea of the passage? use details from the passege to support your answer.

Answer:

Explanation:

sorry i dont know

Calculate a soil's plasticity index by subtracting its liquid limit from its plastic limit, as shown below: LL PL = PI when to classify PI as non-plastic (NP) It is either impossible to identify the liquid limit or the plastic limit.

The volume of the soil is unaffected by a fall in moisture levels after the plastic threshold. At the shrinkage limit, the sample transitions from a semi-solid to a solid state (boundary water content). After this, the sample starts to dry up. For a brief period of time, knead the soil to somewhat lower its water content. Till the thread breaks when it reaches a consistent diameter of 1/8 in, repeat steps 2 through 5. The soil is at its plastic limit when it begins to crumble and when the thread has a consistent diameter of 1/8".

To learn more about plasticity click on the link below:

brainly.com/question/21219036

#SPJ4

Using your experiences is a very personalized strategy, particularly when they show how you've conquered challenges.

Anything that stops progress, whether it be literal or symbolic, whether it be material or immaterial, is considered an impediment: The capacity for original thought is a hindrance to development. Anything that nearly completely blocks a path is considered an impediment. Blood cannot flow normally when there is a blood clot.

Problems can have significant, long-lasting effects, whereas barriers are transient roadblocks. While barriers may appear as challenges we must get over or around in order to keep moving forward, a majority of the time they are only unnecessary diversions.

To know more about Obstacles visit:

https://brainly.com/question/17292258

#SPJ4

For a gear train that would train that transform a counterclockwise input into a counterclockwise output such that the gear that is driven rotates three times when the driver rotates once. Other part of the question is discussed below.

1) The number of gears in the gear train = 3 gears with an arrangement such that there is a gear in between the input and the output gear that rotates clockwise for the output gear to rotate counter clockwise

2) The speed ratio of the driven gear to the driver gear = 3

Therefore, For a gear train that would train that transform a counterclockwise input into a counterclockwise output such that the gear that is driven rotates three times when the driver rotates once. Other part of the question is discussed below.

Learn more about gear train on:

https://brainly.com/question/21751176

#SPJ1

The maximum bending moment that the load has in pounds would be 2700lb.

When the shear force at that portion is zero or changes sign due to the point of contra flexure, when the bending moment is zero, the maximum bending moment occurs in the beam. Reason: Because it results in convexity downhill, the positive bending moment in a section is taken into account.

The shear force would then have to change the sign when it is at the load position.

Such that we would have

R₁ * 12

where R₁ = 225

225 x 12 = 2700

We can cross check the solution by solving for the right side

= R₂ x 12

= 675 lb x 12

= 2700 lb

Hence we would say that the maximum bending moment in pounds is 2700.

Read more on bending moment here: https://brainly.com/question/13798847

#SPJ1