A ramjet has a constant-diameter combustion chamber followed by a nozzle whose throat diameter is 0.94 times the chamber diameter. Air enters the combustion chamber with T, 1450 K and M-0.3. How high may the temperature rise in the combustion chamber without necessarily changing the chamber inlet conditions? For simplicity, neglect frictional losses in the chamber and nozzles and assume that the working fluid has a specific heat ratio of 1.333.

Answer:

Explained below

Explanation:

Perfect Elastic Plastic in steel design is simply a method whereby the structural members are selected using the criteria of the overall ultimate capacity of the system. However, when safety is considered, the applied loads are usually increased by factors of safety as prescribed in the relevant steel design codes. Therefore, this model of design is just based on the yield capacity of the steel.

Answer:

Dispersion modeling uses mathematical formulations to characterize the atmospheric processes that disperse a pollutant emitted by a source. Based on emissions and meteorological inputs, a dispersion model can be used to predict concentrations at selected downwind receptor locations

Explanation:

The first performance tool a technician would use to check if a computer has sufficient hardware resources for a specific application is a resource monitor.

A resource monitor is the ideal tool for a technician to assess hardware resource utilization on a computer. It provides real-time information about CPU usage, memory consumption, disk activity, and network traffic. By analyzing these metrics while the particular application is executing, the technician can determine if the computer has enough CPU power, memory, and disk space to handle the application's requirements.

If the resource monitor shows high CPU usage, excessive memory consumption, or heavy disk activity, it may indicate that the computer is struggling to meet the demands of the application. The technician can then consider upgrading the hardware or optimizing system settings to ensure smooth performance.

Learn more about resource monitor here:

https://brainly.com/question/31453080

#SPJ11

Based on the information provided by these technicians, both of them are correct.

According to heating, ventilation, and air conditioning (HVAC), heat in an air-conditioning system generally flows from the hotter object to the colder object.

As the refrigerant evaporates in a small radiator-type unit (evaporator), it absorbs heat as it changes phase from liquid to gas. Also, as the heat is being absorbed by the refrigerant, the small radiator-type unit (evaporator) becomes cold.

In conclusion, we can logically deduce that both of them are correct.

Read more on heat flow here: https://brainly.com/question/16055406

#SPJ1

Answer:

control loop unit

Explanation:

Edmentum/Plato

Demand pull and technology push are two different ways in which new products can be developed. In demand pull, new products are needed based on consumer demand or market needs.

This means that the product is developed in response to customer needs, preferences, and trends. Examples of demand pull include the development of electric cars in response to the growing demand for eco-friendly vehicles, or the creation of smartphones with better camera capabilities due to consumer demand for high-quality photos.

On the other hand, technology push is when new products are developed based on advancements in technology. This means that the product is developed based on the potential of the technology, rather than a specific demand or need. Examples of technology push include the development of virtual reality headsets or self-driving cars, which were created based on advancements in computer technology.

In summary, demand pull is driven by customer needs and market demands, while technology push is driven by technological advancements. Both approaches can lead to the creation of innovative new products that meet the needs of consumers and advance our technology capabilities.

To know more about virtual reality visit:

https://brainly.com/question/30515470

#SPJ11

The alternative that could be thought of in order to accommodate changing demand patterns is to increase the number of bins to manage the picking of orders which would accommodate a large number of orders from diverse customers.

To accommodate changing demand patterns, the number of picking stations and number of pickers can also be increased in order to manage the orders of customers efficiently.

Home shopping should continue to have its own dedicated area within the SANDC, with its own inventory and OSR equipment as it helps for easier assemblage and storage.

Learn more about demand on:

https://brainly.com/question/1245771

#SPJ1

F=m*a

F=80*20

F =1600 ans"

Answer: basically we are asked to find it's force and the formula that helps us to find force is Force= Mass× Acceleration

so let's put out the given and what we need to find

GIVEN. Solution

F=m.a

Mass= 1300. F=1300kg×20m/s

speed (Acceleration)=20m/2. F=26000Kg.m/s

Force=? F=26000N

N stands for Newton and the reason that it comes Newton is because it is the SI-unit of Force and the result of kg×m/s.

Any number of bs is acceptable. There is no limit to how many b's can be represented by b*. The regular expression can be written as follows: b∗ab∗ab∗ .

A finite-state machine (FSM), finite-state automaton (FSA; plural: automata), finite automaton, or just a state machine is a model of computation in mathematics.

Building a generic suffix tree for the strings, then identifying the deepest internal nodes that contain leaf nodes from every string in the collection will reveal the longest common substrings.

To know more about strings visit :-

https://brainly.com/question/30782286

#SPJ4

Answer:

Reduce manufacturing costs.

Explanation:

Hope This Helps

Have A Great Day

When selecting materials for use as furnace linings, several factors need to be carefully considered. Two important factors are:

Temperature Resistance: Furnaces operate at high temperatures, and the chosen lining material must have excellent temperature resistance to withstand the extreme heat. Different furnaces may require different temperature capabilities, so it is crucial to select a lining material that can withstand the specific operating temperature range. Factors such as melting point, softening point, and thermal conductivity of the material should be evaluated to ensure it can handle the heat without deteriorating or deforming. High-temperature-resistant materials, such as refractory ceramics (e.g., alumina, silica, zirconia), refractory metals (e.g., molybdenum, tungsten), or specialized heat-resistant alloys, are commonly used for furnace linings.

Chemical Compatibility: Furnaces often involve various chemical processes and environments, such as oxidation, reduction, acidic or alkaline atmospheres, or exposure to corrosive gases. The selected lining material must be chemically compatible with these conditions to prevent degradation or chemical reactions that could compromise the integrity of the lining. It is important to consider factors such as resistance to chemical attack, stability in different atmospheres, and potential reactions with the process materials or by-products. Suitable lining materials may include refractory materials that are chemically inert or have specific chemical resistance properties, such as high-alumina refractories, silica-based refractories, or certain types of specialty coatings.

By carefully evaluating temperature resistance and chemical compatibility, the selection of a suitable lining material can ensure optimal performance, longevity, and safety of furnace operations.

Learn more about selecting materials for furnace linings here: https://brainly.com/question/32850632

#SPJ11

You can read about it here https://www.cornellcollege.edu/information-technology/policies/technology-policies/limitations-of-laptops.shtml

In order to scale the task processing technique in Text 1 for more tasks, the scheduler lines that have to be changed are between lines 29-43 and line 35.

The scheduler is responsible for allocating resources to different tasks in an efficient and effective manner. In order to do this, it has to be able to handle multiple tasks at once, and be able to allocate resources to each task as needed.

The scheduler lines between lines 29-43 and line 35 are the key areas where the scheduler can be configured to handle more tasks. This can involve changing the scheduling algorithm used by the scheduler, or increasing the amount of resources available to the scheduler so that it can handle more tasks without slowing down or crashing.

To know more about technique  visit:-

https://brainly.com/question/32389567

#SPJ11

External depreciation may be defined as a loss in value caused by an undesirable or hazardous influence offsite.

Depreciation may be defined as a situation when the financial value of an acquisition declines over time due to exploitation, fray, and incision, or obsolescence.

External depreciation may also be referred to as "economic obsolescence". It causes a negative influence on the financial value gradually.

Therefore, it is well described above.

To learn more about Depreciation, refer to the link:

https://brainly.com/question/1203926

#SPJ1

The missing term in the presented paragraph is environmental.

In recent years the effects of climate change have been strongly manifested around the world causing:

Therefore, many companies have begun to investigate productive alternatives to reduce their environmental impact. In the case of the car industry, companies have deepened their research on other sources of energy such as:

One of them is Toyota, the Japanese brand that has developed cars that work hybrid, that is, with gasoline and electric power. This will reduce the emissions of CO2 and other harmful gases into the atmosphere.

Therefore, it is possible to infer that the missing term in the paragraph is Environmental.

Learn more in: https://brainly.com/question/9427437

Option A, A lossless compression algorithm can guarantee reconstruction of original data, while a lossy compression algorithm cannot

Lossless compression algorithms are designed to reduce the number of bits needed to represent a file or data stream without losing any information. This means that the original data can be exactly reconstructed from the compressed data, without any loss of quality or accuracy.

On the other hand, lossy compression algorithms are designed to achieve a higher degree of compression by discarding some of the information in the original data. While this can result in a smaller file size, it also means that the reconstructed data may not be exactly the same as the original data, and some quality loss may be evident.

To Know More About algorithms, Check Out

https://brainly.com/question/21364358

#SPJ4

Answer:

Hello your question is incomplete attached below is the complete question

Answer : Factor of safety for point A :

i) using MSS

(Fos)MSS =  3.22

ii) using DE

(Fos)DE = 3.27

Factor of safety for point B

i) using MSS

(Fos)MSS =  3.04

ii) using DE

(Fos)DE = 3.604

Explanation:

Factor of safety for point A :

i) using MSS

(Fos)MSS =  3.22

ii) using DE

(Fos)DE = 3.27

Factor of safety for point B

i) using MSS

(Fos)MSS =  3.04

ii) using DE

(Fos)DE = 3.604

Attached below is the detailed solution

The type of rendering model for light that is compatible with the pipeline architecture of the GPU is the rasterization rendering model.

Rasterization is a process where 3D models are converted into 2D images, and this process is highly optimized for the GPU architecture. Rasterization rendering uses the GPU's ability to quickly process and render large amounts of data, making it an ideal choice for real-time rendering in applications such as video games. Additionally, the GPU's parallel processing capabilities allow for multiple light sources to be rendered simultaneously, further improving performance and realism in the rendered scene.

Learn more about Rasterization: https://brainly.com/question/28760953

#SPJ11

Answer:

yes it is very hard you should find a reccomended doctor to aid in your situation. But in the meantime how about you give me that lil brainliest thingy :p

Answer:

An am American engineer

The two main varieties of authentication algorithms are symmetric-key algorithms and asymmetric-key algorithms.

1. Symmetric-key algorithms: In this method, both the sender and receiver use the same secret key to encrypt and decrypt messages. The primary advantage of symmetric-key algorithms is their speed and efficiency, making them suitable for handling large amounts of data. However, the key distribution process can be challenging, as securely sharing the secret key between parties is crucial. Examples of symmetric-key algorithms include Advanced Encryption Standard (AES) and Data Encryption Standard (DES).

2. Asymmetric-key algorithms: Also known as public-key cryptography, this method involves the use of a pair of keys - a public key and a private key. The public key is openly shared, while the private key remains confidential. A message encrypted with the recipient's public key can only be decrypted by their corresponding private key. Asymmetric-key algorithms offer a more secure approach to key distribution, but they are computationally intensive and slower than symmetric-key algorithms. Examples include RSA and Elliptic Curve Cryptography (ECC).

In summary, symmetric-key algorithms are faster and more efficient, but key distribution can be challenging. Asymmetric-key algorithms offer a more secure approach to key distribution but are computationally intensive and slower in comparison. Both methods serve as the foundation for authentication algorithms in modern cryptographic systems.

To know more about symmetric-key algorithms visit:

https://brainly.com/question/32089474

#SPJ11

The group scopes that can contain objects from any domain within the forest are global and universal.

Group scopes that can contain objects from any domain within the forest:

a. Global

d. Universal

Global and universal group scopes can both contain objects from any domain within the forest.

Global groups are used to organize user accounts and groups from a single domain. They can be assigned permissions and access to resources within any domain in the forest.

Universal groups, on the other hand, have a broader scope and can contain objects from any domain within the forest. They are typically used to assign permissions and access across multiple domains in a forest.

Domain local groups are limited to a single domain and are used for assigning permissions and access within that specific domain.

Distribution groups are not specifically related to domain-wide scopes but rather used for email distribution lists in certain messaging systems.

In summary, the group scopes that can contain objects from any domain within the forest are global and universal.

Learn more about Universal here

https://brainly.com/question/28512432

#SPJ11

The lighting fixtures should be waterproof and properly sealed.

Lighting fixtures installed above an indoor pool need to meet specific criteria to ensure safety and durability. These fixtures should be designed specifically for wet or damp environments and be rated as waterproof.

Water can create a hazardous situation if it comes into contact with electrical components, so the fixtures must have appropriate seals to prevent water ingress. Additionally, it's crucial to choose fixtures that are corrosion-resistant to withstand the humid environment around the pool.

The requirements for lighting fixtures in wet environments to ensure safety and longevity. Waterproofing and proper sealing are crucial to protect against electrical hazards and ensure the fixtures can withstand the pool's surroundings.

Learn me about Lighting fixtures

brainly.com/question/14924764

#SPJ11

In snooker, the maximum number of points that can be scored during a single frame is 147. This is achieved by potting all 15 red balls, each worth 1 point, and subsequently potting the colored balls in sequence: yellow (2 points), green (3 points), brown (4 points), blue (5 points), pink (6 points), and black (7 points). Each color is then returned to its original position and can be potted again for additional points.

The angle and wind speed mentioned in your question are not relevant to determining the maximum number of points in a snooker frame. The speed and direction of the balls are controlled by the player's shots, and the rug coating on the table doesn't affect the scoring.

So, regardless of the angle, wind speed, or table surface, the maximum number of points that can be scored in a frame of snooker is 147.

n

e

g

r

o

means black in spanish!

Answer:

thanks for the poiunts

Explanation:

Answer:

Shut off cylinder valve before turning off forklift.

Explanation:

To reduce the pressure in the fuel line, the forklift operator should keep the engine running with the garage door closed and sealed.

In warehouses and on construction sites, a forklift driver is in charge of delivering, moving, loading, and unloading a range of commodities.

Always release the pressure in the LPG lines before disconnecting while filling LPG tanks. To accomplish this, shut off the tank valve and let the engine run until the lines are completely empty.

Before opening the valve on the new tank, shut off the engine and make sure the LPG tanks are fastened to the forklift.

Therefore, the forklift driver should keep the engine running with the garage door closed and sealed in order to lower the pressure in the fuel line.

To learn more about forklift operators, refer to the link:

https://brainly.com/question/3077792

#SPJ2

The EER is a metric for how effectively an air conditioning system can cool a space per unit of power used. It is computed by dividing the amount of cooling capacity an AC delivers per hour by the watts of electricity used.

To determine an air conditioner's EER, measurements taken on the warmest day of the year are often used. EER, in its simplest form, aims to provide consumers with a sense of the cooling power they may anticipate from an AC for every dollar spent on electricity.

Ratio of Seasonal Energy Efficiency (SEER)

SEER provides the average efficiency for the entire season, making it a more dependable efficiency rating for air conditioners than EER, which only assesses the energy efficiency of the AC on the hottest day of the season. It is calculated by dividing the AC's output power (measured in BTUs) over the course of a season by the total energy the machine used during that same period.

Developed by the EPA, this efficiency rating is well-known. The performance and energy efficiency of HVAC systems with the Energy Star rating are often tested to see if they can provide consumers with excellent value while helping to reduce national energy consumption. Although some gadgets cost a little bit more than their less efficient equivalents, the price difference can easily be made up for in energy savings over time.

To know more about EER click on the link:

https://brainly.com/question/15140663

#SPJ4

Answer:

Unit of,

momentum = kg×m/s

momentum per unit area = kg×m/s×m² = kg/m×s

momentum per unit area per unit time= kg/ms²

force = kg×m/s²

force per unit area = kg×m/s²×m² = kg/ms²

Explanation: