A strong electrolyte is one that ________ completely in solution. a) reacts.b) decomposes.c) disappears.d) ionizes.

Answer:

A. 9.83g

B. 13.06

Explanation:

A) To calculate the mass of BaSO4 formed, you need to first write the balanced equation for the reaction:

Ba(OH)2 + H2SO4 -> BaSO4 + 2H2O

Then, you need to find the limiting reactant, which is the one that runs out first and determines how much product is formed. You can do this by converting the volumes and concentrations of the solutions to moles and comparing them with the stoichiometric coefficients.

50 mL of 1.00 M Ba(OH)2 = 0.050 L x 1.00 mol/L = 0.050 mol Ba(OH)2 88.7 mL of 0.475 M H2SO4 = 0.0887 L x 0.475 mol/L = 0.0421 mol H2SO4

According to the equation, 1 mol of Ba(OH)2 reacts with 1 mol of H2SO4, so Ba(OH)2 is in excess and H2SO4 is the limiting reactant.

Next, you need to use the mole ratio between the limiting reactant and the product to find how many moles of BaSO4 are formed:

0.0421 mol H2SO4 x (1 mol BaSO4 / 1 mol H2SO4) = 0.0421 mol BaSO4

Finally, you need to multiply the moles of BaSO4 by its molar mass to get its mass:

0.0421 mol BaSO4 x 233.39 g/mol = 9.83 g BaSO4

So, the mass of BaSO4 formed is 9.83 g.

B) To calculate the pH of the mixed solution, you need to first find the concentration of OH- ions that remain after the reaction. You can do this by subtracting the moles of OH- that reacted with H+ from the initial moles of OH- and dividing by the total volume of the solution.

The initial moles of OH- are equal to the moles of Ba(OH)2:

0.050 mol Ba(OH)2 x (2 mol OH- / 1 mol Ba(OH)2) = 0.100 mol OH-

The moles of OH- that reacted with H+ are equal to the moles of H2SO4:

0.0421 mol H2SO4 x (2 mol H+ / 1 mol H2SO4) = 0.0842 mol H+

The remaining moles of OH- are:

0.100 mol OH- - 0.0842 mol H+ = 0.0158 mol OH-

The total volume of the solution is:

50 mL + 88.7 mL = 138.7 mL = 0.1387 L

The concentration of OH- is:

0.0158 mol OH- / 0.1387 L = 0.114 M

Next, you need to use the relationship between pH and pOH to find the pH:

pOH = -log[OH-] = -log(0.114) = 0.94 pH + pOH = 14 pH = 14 - pOH = 14 - 0.94 = 13.06

So, the pH of the mixed solution is 13.06.

Answer:

83

Explanation:

3X + 2Y → 5C + 4D

2 moles of Y will produce 5 moles of C

33.0 moles of Y will produce: 33.0 x 5/2 = 82.5 or 83 moles of C

Answer:

D. Ultraviolet light should have a short wavelength, not a long wavelength.

Explanation:

just took the quiz on Ed

The mistake Gino made is, ultraviolet light should have a short wavelength, not a long wavelength.

Electromagnetic spectrum is the arrangement of electromagnetic radiations in the order of increasing frequency or decreasing wavelength.

Examples electromagnetic radiations based on increasing wavelength  include;

Thus, the mistake Gino made is, ultraviolet light should have a short wavelength, not a long wavelength.

Learn more about electromagnetic radiation here: https://brainly.com/question/25847009

The correct option is D. loss of electrons.

Loss of electrons is the statement best describes the process of oxidation.

Chemical reaction known as oxidation is described as a procedure that takes place when atoms or group of atoms lose electrons. If a chemical species gains oxygen or loses hydrogen, that is an example of oxidation. Oxidation takes place when these things happen.

An oxidising agent is any substance that causes another chemical lose electrons (become oxidised). On the other hand, a reducing agent is any chemical that causes another chemical to gain electrons.

The biochemical oxygen demand of wastewater is reduced after oxidation, which also reduces some contaminants' toxicity. Some contaminants undergo this treatment and are transformed into carbon dioxide, water, and biosolids. Disinfection is frequently accomplished using chemical oxidation.

To know more about oxidation refer here:

https://brainly.com/question/25798412#

#SPJ4

Answer:

b) Li2S(aq)+Pb(NO3)2(aq)

e) K2S(aq)+Sn(NO3)4(aq)

Explanation:

they are the only two of the options that contain a sulfide ion (S) therefore they are the only ones that could be considered in the question.

b) Li2S(aq)+Pb(NO3)2(aq)

e) K2S(aq)+Sn(NO3)4(aq)

The temperature of the gas in Kelvin, after its volume is reduced to 2,450 mL, is approximately 143.27 K.

To determine the temperature of the gas in Kelvin after its volume is reduced, we can use the combined gas law, which relates the initial and final conditions of pressure, volume, and temperature for a given amount of gas.

The combined gas law equation is:

(P₁ * V₁) / T₁ = (P₂ * V₂) / T₂

Where P₁ and P₂ are the initial and final pressures, V₁ and V₂ are the initial and final volumes, T₁ is the initial temperature in Kelvin, and T₂ is the final temperature in Kelvin.

Given that the initial volume V₁ is 3,480 mL, the initial temperature T₁ is -70.0 °C (which needs to be converted to Kelvin), and the final volume V₂ is 2,450 mL, we can substitute these values into the equation.

To convert -70.0 °C to Kelvin, we add 273.15 to it, resulting in T₁ = 203.15 K.

Now we can solve for T₂:

(T₂ * V₁) / T₁ = V₂

T₂ = (V₂ * T₁) / V₁ = (2,450 mL * 203.15 K) / 3,480 mL

Simplifying the equation, we find:

T₂ ≈ 143.27 K

Therefore, the temperature of the gas in Kelvin, after its volume is reduced to 2,450 mL, is approximately 143.27 K.

For more question on temperature

https://brainly.com/question/4735135

#SPJ8

The correct nuclide symbol for this atom is: D. ¹³²⁴⁶Ge, where ¹³² is the mass number (protons + neutrons) and ⁴⁶Ge is the chemical symbol for the element germanium, which has 32 protons.

An atom is the basic unit of matter, consisting of a nucleus composed of protons and neutrons, surrounded by a cloud of negatively charged electrons. The protons and neutrons are located in the nucleus at the center of the atom and are collectively known as nucleons. The number of protons in the nucleus determines the atomic number of the atom, which in turn determines the identity of the element. Each element has a unique atomic number, and the elements are arranged in the periodic table in order of increasing atomic number. Electrons are negatively charged particles that orbit the nucleus in shells or energy levels. The number and arrangement of electrons in an atom's shells determine its chemical and physical properties, such as reactivity, conductivity, and melting point.

To know more about atom,

https://brainly.com/question/13973654

#SPJ1

Answer:

hedges are used to be courteous in expressing (counterclaims)

Answer:

Br-CH2-CH(CH3)2-C(Cl)H-CH(CH3)2-CHO

Explanation:

The molecule has a total of 14 carbon atoms, 13 hydrogen atoms, and 1 bromine atom. The carbon atoms are arranged in a chain with a methyl group attached to the second carbon atom, a chlorine atom attached to the third carbon atom, and two methyl groups attached to the fourth carbon atom. The fifth carbon atom has a carbonyl group attached to it.

The molecule is an aldehyde, which means that it has a carbonyl group (C=O) at the end of the chain. The carbonyl group is polar, and the oxygen atom has a partial negative charge. The hydrogen atom has a partial positive charge. This polarity makes the aldehyde group susceptible to nucleophilic attack.

The bromine and chlorine atoms are both electrophilic, which means that they have a partial positive charge. This makes them susceptible to nucleophilic attack.

The methyl groups are non-polar and do not have any significant reactivity.

The molecule is a chiral molecule, which means that it has a mirror image that is not superimposable on itself. This is because the carbon atom with the carbonyl group is attached to four different groups.

The molecule is a liquid at room temperature and has a strong odor. It is used in a variety of products, including perfumes, flavorings, and plastics.

Considering the definition of molar mass, the correct answer is option c): the mass of 1.85 moles H₂O₂ is 62.9 grams.

The molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.

The molar mass of a compound is the sum of the molar mass of the elements that form it (whose value is found in the periodic table) multiplied by the number of times they appear in the compound.

In this case, you know the molar mass of the elements is:

So, the molar mass of the compound H₂O₂ is calculated as:

H₂O₂= 2× 1 g/mole + 2× 16 g/mole

Solving:

H₂O₂= 34 g/mole

You can apply the following rule of three: If by definition of molar mass 1 mole of the compound contains 34 grams, 1.85 moles of the compound contains how much mass?

mass= (1.85 moles× 34 grams)÷ 1 mole

mass= 62.9 grams

Finally, the mass of 1.85 moles H₂O₂ is 62.9 grams.

Learn more about molar mass:

brainly.com/question/5216907

#SPJ1

Answer:

product

Explanation:

Chemical reactions are said to be the formation of the products from the reactants. "In a chemical reaction, two reactants mix. The resulting substance is called a product." Thus, option C is correct.

A chemical reaction has been defined as the rearrangement of the atoms of the reactant molecules to result in new substances that differ in chemical properties and compositions. This results in the chemical transformation that results in product formation.

The products produced are new substances that are formed by the breaking or the combination of two or more reactants. The molecules of the reactant undergo collision that forms or breaks the bonds of the reactants.

The products produced are different in chemical properties and composition from the reactants it undergoes chemical changes. An example is iron rust, here iron undergoes oxidation to produce rust that is irreversible changes.

Therefore, option C. product is formed by mixing two or more reactants in a chemical reaction.

Learn more about chemical reactions, here:

https://brainly.com/question/14929452

#SPJ2

Answer:

1 mole =6.02×10^23atoms

3.25×10^24atoms

3.25×10^24/6.02×10^23

5.40 moles

C is correct option

The given chemical equation, 2N₂ + 3H₂ <==>2NH3, is an example of a reversible reaction.option A.

The double arrows between the reactants and products indicate that the reaction can proceed in both directions, forming both products and reactants.The reversible reaction, also known as a chemical equilibrium reaction, refers to a chemical reaction that can occur in both forward and reverse directions. It occurs when reactants are converted into products, and the products are also converted back into the original reactants.A reversible reaction can be identified by the symbol “<==>” or “⇌” that appears between the reactants and products in the chemical equation. It denotes that the reaction is in a state of chemical equilibrium. When the reactants and products have achieved equilibrium, the rate of the forward and reverse reactions is equal, and there is no further net change in the amounts of the reactants and products.A combustion reaction is a type of exothermic reaction in which a substance reacts with an oxidizing agent to produce heat and light. A one-way reaction is a type of reaction that occurs in only one direction and cannot be reversed without significant changes to the reaction conditions, such as changing the temperature or pressure.A reversible reaction, unlike a one-way reaction, can occur in both directions and reach equilibrium when the forward and reverse reaction rates are equal.option A.

for such more questions on  reaction

https://brainly.com/question/24795637

#SPJ8

From the solution that we have in the question;

The equilibrium constant, denoted as K, is a value that quantitatively represents the ratio of the concentrations of products to reactants at equilibrium in a chemical reaction.

It is a fundamental concept in chemical equilibrium.

The value of the equilibrium constant provides valuable information about the position of equilibrium and the relative concentrations of species involved in a chemical reaction.

Kc = [X] [Y]/[XY]

\(0.25 = (0.1 + x)^2/(0.5 - x)\)

\(0.25(0.5 - x) = (0.1 + x)^2\)

\(0.125 - 0.25x =0.01 + 0.2x + x^2\\ x^2 + 0.45x - 0.115 = 0\)

x = 0.18 M

The equilibrium amount of X and Y=  0.28 M and the equilibrium concentration of XY = 0.32 M

Learn more about equilibrium constant:

https://brainly.com/question/29253884

#SPJ1

Based on the answer to the question that we have;

The ratio of the product to reactant concentrations in a chemical reaction at equilibrium is represented quantitatively by the equilibrium constant, abbreviated as K.

It is a cornerstone of the theory of chemical equilibrium.

A chemical reaction's equilibrium position and the relative concentrations of the species involved can both be learned from the equilibrium constant's value.

Kc = [X][Y]/[XY]

\(0.25 = (0.1 + x)^2/(0.5 - x)\\0.25(0.5 - x) = (0.1 +x)^2\\0.125 - 0.25x = 0.01 +0.2x +x^2\\= 0.18 M\)

The equilibrium concentration of;

XY =0.5 - 0.18

=0.32 M

Then the equilibrium amount of

X and Y is

0.1 + 0.18= 0.28 M.

Learn more about equilibrium:brainly.com/question/29253884

#SPJ1

Answer:

the answer is 57.03%

Explanation:

%yield= ((practical yield)/(theoretical yield))×100%

The combined gas law equation is:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

The volume of the gas at 30 °C is approximately 760.67 mL.

To determine the volume of the gas at 30 °C, we can use the combined gas law equation, which relates the initial and final conditions of temperature and volume for a gas.

The combined gas law equation is:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

Where:

P1 and P2 are the initial and final pressures, respectively

V1 and V2 are the initial and final volumes, respectively

T1 and T2 are the initial and final temperatures in Kelvin, respectively

We need to convert the temperatures from Celsius to Kelvin by adding 273.15 to each value.

Given:

V1 = 550 mL

T1 = -55 °C = 218.15 K

T2 = 30 °C = 303.15 K

Assuming the pressure remains constant, we can rearrange the equation to solve for V2:

V2 = (P1 * V1 * T2) / (P2 * T1)

Since the pressure is not specified in the problem, we can assume it remains constant, allowing us to cancel out the pressure terms. Thus, the final equation becomes:

V2 = (V1 * T2) / T1

Plugging in the given values:

V2 = (550 mL * 303.15 K) / 218.15 K

Simplifying the calculation, we find:

V2 ≈ 760.67 mL

Therefore, the volume of the gas at 30 °C is approximately 760.67 mL.

For more question on gas law

https://brainly.com/question/27870704

#SPJ8

Answer: 3.44%

Explanation: try it for math

No, Ag₂SO₄ will not precipitate when 100ml of .050M AgNO3 is mixed with 10ml of 5x10-2 m Na₂SO₄ solution because the precipitate is made only in an aqueous solution.

Precipitation is the solid extract that is collect in a place. Precipitate is the concentration of the substance in a solution in a specific place.

Thus, No, Ag₂SO₄ will not precipitate when 100ml of .050M AgNO3 is mixed with 10ml of 5x10-2 m Na₂SO₄ solution because the precipitate is made only in an aqueous solution.

Learn more about precipitation

https://brainly.com/question/18109776

#SPJ1

Bond dissociation energies are endothermic.

What is bond dissociation energy?

The bond dissociation enthalpy can be used to measure the strength of the chemical link between any two species. The bond dissociation energy of a chemical bond is sometimes defined as the enthalpy change of the homolytic fission of the bond at absolute zero, even though it is typically measured as the enthalpy change at standard conditions (298K) (0K).

Hence, bond dissociation energies are endothermic in nature.

To learn more about Bond Energy, here

https://brainly.com/question/26141360

#SPJ1

When you see  or visit grasslands you know that :

Grasslands are a type of vegetation found mostly in areas with favourable weather conditions such as mild summers and right amount of precipitation which provides the grasslands with enough water for proper growth.

Other types of vegetation include :

Desert vegetation expreciences very hot summers and little precipitation which leads to the scarcity of green vegetation, while forest vegetation expreciences a very high level of precipitation.

Hence we can conclude that When you see  or visit grasslands you know that :They have mild to hot summers ,They have a lot of precipitation  

Learn more about grasslands : https://brainly.com/question/994161

Answer:

They have little precipitation.

They have cold winters.

They have mild to hot summers.

A chemist employed by an airplane manufacturer investigates new adhesives for the purpose of building airplanes without rivets. she is engaged in applied research.

Every research project begins with a precise explanation of the aim of the investigation, which aids in identifying the research method or strategy used. A researcher can therefore carry out either basic research or applied research.

A non-systematic approach to solving certain difficulties or problems is through applied research. These concerns or problems may affect a person, a group, or the entire society. Because it jumps right to seeking solutions, it is referred to as "non-systematic."

It is frequently referred to as a "scientific process" since it makes use of the existing scientific instruments to identify solutions.

There are three different categories in this research:

Action research, Research and Development, and evaluation research are three types of research.

To know more about applied research from the link

brainly.com/question/28812570

#SPJ4

Yes, that statement is generally correct. A scientific law is a statement that describes a phenomenon or pattern in nature, often expressed mathematically, without attempting to explain why it occurs. A scientific theory, on the other hand, is a well-substantiated explanation for a set of phenomena, based on empirical evidence and scientific reasoning.

A scientific law summarizes what happens in a particular situation, often in the form of an equation or formula, whereas a scientific theory attempts to explain why it happens.

For example, the law of gravity describes the attraction between masses, but it does not explain why this attraction occurs. In contrast, the theory of general relativity attempts to explain the underlying principles of gravity, including its effects on the curvature of space-time.

It's worth noting that both scientific laws and scientific theories are based on empirical evidence, but they serve different purposes in scientific inquiry. Laws describe what happens in a particular situation, while theories attempt to explain why it happens.

For more question on scientific law click on

https://brainly.com/question/16347879

#SPJ11

Answer:

number of moles is inversely proportional to the Temperature

Explanation:

As we know

PV = nRT

where P is the pressure

V is the volume

n is the number of moles

R is the gas constant

and T is the temperature

If we see the equation, we can find that n is inversely proportional to the Temperature

3.47 moles Li is made up of 3.01x1023 atoms. The cubic body-centered structure of lithium metal. Its molarity is 6.94 g mol1, and its dense is 0.53 g cm3. Determine the lithium metal unit cell's edge.

Correct option  is, A.

Lithium has a mass number of 7. Every element's mass number is equal to the sum of its protons and neutrons. With data from the Cyclic Table of Elements, you can calculate the number if neutrons, protons, or the mass number of each element. Since lithium has a 3 atomic number, that has 3 protons.

Lithium-7 is a stable (non-radioactive) isotope of the metal lithium. Both naturally occuring and produced by fission. Lithium 7 metal is one of the almost 250 metal based isotopes that American Element produces for base material, biological and medical tagging, or other purposes.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ1

In Atlanta, GA, certain seasons are associated with poorer air quality due to various factors such as weather conditions, human activities, and geographical location.

Typically, the seasons with the worst AQI in Atlanta, GA, are summer and early fall. This is primarily due to the combination of high temperatures, stagnant air masses, and increased pollution from various sources.

During the summer months, Atlanta experiences hot and humid weather, which can contribute to the formation of ground-level ozone. Ozone is a harmful pollutant that is created when pollutants from vehicles, power plants, and industrial activities react with sunlight and heat. High levels of ozone can cause respiratory issues and other health problems.

In addition to ozone, Atlanta also experiences increased levels of particulate matter (PM) during the summer and early fall. PM refers to tiny particles suspended in the air, which can come from sources such as vehicle exhaust, industrial emissions, and wildfires.

These particles can be inhaled into the lungs and can have detrimental effects on respiratory health.

It's important to note that air quality can vary from year to year and is influenced by various factors. Local regulations, weather patterns, and changes in pollutant emissions can all impact the AQI during different seasons.

Monitoring air quality reports and taking necessary precautions such as reducing outdoor activities during times of poor air quality can help individuals stay informed and protect their health.

For more such question on air quality visit:

https://brainly.com/question/21173066

#SPJ8

Answer:

This question is obviously true

Explanation:

I would expect