In the car industry, clay models are used to visualize and test new car designs.

True
False

The correct sequence of steps to execute a turn are:Reduce speed and search the intersection.

SignalPosition the vehicle in the lane to prepare for the turn.Move to the correct lane to prepare for the turn.Enter nearest lane traveling in the correct position.When safe, look into the turn and accelerate. Here is a more detailed explanation of each step:

1. Reduce speed and search the intersection: The first step is to reduce your speed to an appropriate level and search the intersection for any traffic lights, stop signs, or pedestrians.

2. Signal: Signal to inform other drivers of your intention to turn.3. Position the vehicle in the lane to prepare for the turn: Position your vehicle in the lane that you need to be in to make the turn.

4. Move to the correct lane to prepare for the turn: If you need to change lanes to make the turn, move to the correct lane in a safe and timely manner.5. Enter nearest lane traveling in the correct position: Enter the nearest lane that will take you in the direction you need to go and maintain your position in the lane.

6. When safe, look into the turn and accelerate: Once you are in the turn, look into the turn to see where you are going and accelerate as necessary to maintain a safe speed.

For more such questions speed,Click on

https://brainly.com/question/21729272

#SPJ8

We can see here that the law of resistivity, also known as Ohm's law, states that the electrical resistance of a conductor is directly proportional to its resistivity and length, and inversely proportional to its cross-sectional area.

The Law of resistivity can be mathematically represented as:

R = ρ × (L / A)

Where:

R is the electrical resistance of the conductor,

ρ (rho) is the resistivity of the material,

L is the length of the conductor, and

A is the cross-sectional area of the conductor.

The resistivity (ρ) is a characteristic property of a material that quantifies its ability to resist the flow of electric current. It depends on the nature of the material, its temperature, and sometimes its purity. Resistivity is measured in ohm-meters (Ω·m).

Learn more about resistivity on https://brainly.com/question/30611906

#SPJ1

Answer:

Engineers work in a variety of fields to analyze, develop and evaluate large-scale, complex systems. This can mean and improve and maintaining current systems or creating brand new projects. Engineers will design and draft blueprints, visit systems in the field and manage projects.

Answer:

Thinner and less durable.

In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

The diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm

≈ 1696.62mm.

Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.

Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

Learn more about locus on

https://brainly.com/question/13941750

#SPJ1

Answer:

Option C (80 ohms) is the right answer.

Explanation:

The given values are:

Current,

I = 1.5 A

Voltage,

V = I20 V

As we know,

⇒  \(V=IR\)

or,

The resistance will be:

⇒  \(R=\frac{V}{I}\)

On substituting the values, we get

⇒      \(=\frac{120}{1.5}\)

⇒      \(=80 \ ohms\)

Answer:

I believe the answer is B.

Explanation:

- Pump Operator for the top circle

- Power Distributor for the circle to the left

- Fuel Cell Engineer for the middle circle

Hope this helps!! Let me know if I am wrong!!

The diagram correctly identifies the career pathways and the common link between them is diagram a, Hydroelectric Production Manager.

The Energy Career Cluster trains people for jobs in traditional and alternative energy design, planning, maintenance, generating, transmission, and distribution.

A Venn diagram employs circles or other shapes that overlap to show the logical connections between two or more groups of objects. They frequently serve to visually group objects while highlighting how they differ and how they are similar. Three circles are overlapping in a center circle in a Venn diagram.

Therefore, diagram a, Hydroelectric Production Manager identifies the career pathways and the common link between them is a diagram.

To learn more about the energy career cluster, refer to the link:

https://brainly.com/question/1908287

#SPJ2

The question is incomplete. The diagram is given below:

Rating for the battery.

The battery is an important part of the powerhouse of the device and the equipment at work the battery will work as per the charging system and will die out at the time when it's used completely. The batter has differing time that allows for the battery to discharge and charge immediately.

Thus the answer is reserved capacity.

Learn more about the approximates the amount.

brainly.com/question/1159859.

Answer:

  greater than 1

Explanation:

The mechanical advantage is the ratio Fr/Fe. So if Fr > Fe, the mechanical advantage is greater than 1.

A student who received a score of 3.00 or higher met or exceeded the benchmark for a student who is on track to pass.This score is based on the anticipation at the moment the exam was administered rather than the anticipation for the end of the year.

To learn more about i-Ready system refer

https://brainly.com/question/23868760

#SPJ1

Answer:

Adjusting the input to something based on what it’s output is doing is an example of **feedback**. Feedback is a process in which the output of a system is used to modify the input of the system. This can be used to improve the performance of the system by making it more responsive to changes in the environment.

For example, a thermostat uses feedback to maintain a constant temperature in a room. The thermostat has a sensor that measures the temperature of the room. If the temperature is too high, the thermostat turns on the air conditioner. If the temperature is too low, the thermostat turns on the heater. This process of adjusting the input based on the output is called feedback.

Feedback is a very important concept in engineering and science. It is used in a wide variety of applications, such as control systems, signal processing, and machine learning.

Explanation:

Note that where Technician A says an automotive brake booster is a piston-type pump that develops pressure for the vehicles brake system, and Technician B says an automotive brake booster is a vacuum-operated device that assists brake pedal application, BOTH technicians are right.

As Technician B describes, a vacuum-assisted brake booster uses engine vacuum to aid the brake pedal. The vacuum is created by the intake manifold of the engine and is utilized to power a diaphragm within the brake booster. When the driver pushes the brake pedal, the vacuum is activated to increase the pressure on the brake master cylinder, making it simpler for the driver to apply the brakes.

A hydraulic-assisted brake booster, as described by Technician A, employs a piston-type pump to provide pressure for the vehicle's braking system.

Learn more about Brakes:
https://brainly.com/question/20355055
#SPJ1

Answer:

C) Electricity

Explanation:

The movement of electrons from one atom to another refers to electricity.

Answer:

what is information systems

Answer:

over your right shoulder

Explanation:

Answer:

When you want to back out of a parking space, you should do it slowly and look over your right shoulder while backing.

Answer:

I think it would be 83% because petroleum, natural gas, and coal are fossil fuels.

Answer:

replacing air filter is the easiest and practical way to improve gas mileage. If your car's air filter is clogged with debris, dust, or other particles, it will greatly increase fuel consumption and reduce gas mileage. So replacing your car's air filter can instantly improve gas mileage of your car

Answer: The answer is A They must be adaptable to changing needs or situations.

Answer:

you need a Bachelor's degree in mechanical engineering and have at least three years of experience.

Explanation:

Answer: D) Beams

Explanation:

Answer:

The correct answer is D. beams

Answer: A problem is a situation that calls for managers to choose between options.

The scope of BS computer science in Pakistan is quite vast

try this :)

Answer:

the font is tooo small plz zoom i  so i can help

Explanation:

Answer:

Hope this helped ^^

Explanation:

To find the resultant velocity of the ship, we can use vector addition by considering the ship's velocity in still water and the velocity of the current separately.

Let's denote the ship's velocity in still water as Vship = 10 m/s, and the velocity of the current as Vcurrent = 2 m/s.

To find the resultant velocity, we can break down the ship's velocity and the current's velocity into their horizontal (East/West) and vertical (North/South) components.

The horizontal component of the ship's velocity (Vship_h) can be calculated using the cosine rule:

Vship_h = Vship * cos(30°)

Vship_h = 10 * cos(30°) = 10 * (√3 / 2) ≈ 8.7 m/s

The vertical component of the ship's velocity (Vship_v) can be calculated using the sine rule:

Vship_v = Vship * sin(30°)

Vship_v = 10 * sin(30°) = 10 * (1 / 2) = 5 m/s

Now, since the current is flowing towards the direction SE (southeast), which is 45° from the East direction, we can break down the current's velocity into its horizontal and vertical components.

The horizontal component of the current's velocity (Vcurrent_h) can be calculated using the cosine rule:

Vcurrent_h = Vcurrent * cos(45°)

Vcurrent_h = 2 * cos(45°) = 2 * (√2 / 2) = √2 m/s

The vertical component of the current's velocity (Vcurrent_v) can be calculated using the sine rule:

Vcurrent_v = Vcurrent * sin(45°)

Vcurrent_v = 2 * sin(45°) = 2 * (√2 / 2) = √2 m/s

Now, we can find the resultant horizontal velocity (Vresultant_h) by adding the horizontal components of the ship's velocity and the current's velocity:

Vresultant_h = Vship_h + Vcurrent_h

Vresultant_h = 8.7 + √2 ≈ 10.1 m/s

Similarly, we can find the resultant vertical velocity (Vresultant_v) by adding the vertical components of the ship's velocity and the current's velocity:

Vresultant_v = Vship_v + Vcurrent_v

Vresultant_v = 5 + √2 ≈ 6.4 m/s

Finally, we can calculate the magnitude of the resultant velocity (Vresultant) using the Pythagorean theorem:

Vresultant = √(Vresultant_h² + Vresultant_v²)

Vresultant = √(10.1² + 6.4²) ≈ 11.9 m/s

The bearing of the resultant velocity can be calculated using the inverse tangent (tan⁻¹) of the vertical component divided by the horizontal component:

Bearing = tan⁻¹(Vresultant_v / Vresultant_h)

Bearing = tan⁻¹(6.4 / 10.1) ≈ 33.7°

Therefore, the resultant velocity of the ship, in terms of its speed and bearing, is approximately 11.9 m/s at a bearing of 33.7°.

Answer:

Explanation:

30,000 parts

A single car has about 30,000 parts, counting every part down to the smallest screws.

The total number of parts (screws and bolts included) of the average car is around 30,000.

The radiator can be described as a heat exchanger used to eliminate heat from the coolant in the cooling system to prevent the vehicle’s engine from overheating. The hot coolant is routed via the radiator, where the coolant exchange heat with the passing air.

The AC Compressor pumps coolant throughout the system and starts the process of the cooling car. The battery saves energy in chemical form so it is released as electricity to run the vehicle’s electrical components.

The front and rear axles are supporting a vehicle where the wheel hubs are attached. Axles are part of the suspension system and are responsible for delivering power to the wheels from the engine via the transmission and differential.

A car’s brakes can be used to stop or slow a vehicle or prevent it from moving when parked or stopped.

Learn more about parts of automobiles, here:

https://brainly.com/question/800372

#SPJ2

Answer:

Hammer, screw driver and screw wrench.

Explanation:

The proper use of shop equipment is to use it by that method used by the experience person in order to save ourselves from any damage. Hammer is a shop equipment that is used by holding it at the bottom and strike on the nail, Screw driver is used to hold it from the bottom and rotate it on the nail in order to fix or loose the nail. Screw wrench is used to loose and tight the bolt, it can be hold from the bottom and rotate it to loose or tight the bolt.

Answer:b

Explanation: