Inherently safer design: Which inherently safer design strategy applies to each of the following? a. A flammable solvent is used to control the temperature in a reactor. The solvent is replaced by a nonflammable solvent. b. A valve that requires 10 turns to close is replaced by a quarter-turn valve. c. The equipment in a process can withstand 10 bar gauge (barg) of pressure even though the actual process operates normally at 5 barg. The pressure relief valve opening pressure is reduced from 10 barg to 8 barg. d. A plant stores a large quantity of a hazardous intermediate chemical to keep the plant operating during upsets in the upstream process. The intermediate storage is eliminated and the process reliability is improved to prevent upsets and downtime. e. An alternative reaction pathway is used that involves less hazardous raw materials. f. The trays on a distillation column are replaced by structured packing, which operates over a wider range of operating conditions.

Adam conducting static code analysis.

Static program analysis stands for the analysis of computer programs performed without managing them, in contrast with dynamic program analysis, which stands for performed on programs during their execution.

Static analysis, also named static code analysis, exists as a method of computer program debugging that is accomplished by examining the code without executing the program. The process furnishes an understanding of the code structure and can assist ensure that the code adheres to industry standards.

By static code analysis, you can help developers discover errors before they compile or run the code and alert them about any other problems, such as a lack of inline documentation, bad coding standards, security issues, performance issues, and so on.

Hence, Adam conducting static code analysis.

To learn more about static code analysis refer to:

https://brainly.com/question/26994623

#SPJ4

Answer:

partner itself

Explanation:

Answer:

limited partner

hope this answer correct :)

Answer:

To become ASE certified, you must pass an ASE test and have relevant hands-on work experience. The amount of work experience required can vary by test, and is specified in detail here. ASE recommends submitting the form after you've registered to take an ASE certification test.

Good luck!

Explanation:

Answer:  One theme in White Fang is adapting in order to survive. White Fang finally submits to Gray Beaver. He also copes with fighting other dogs. White Fang changes his behaviors so that he can live.

Explanation: its the sample response

Answer:

Stuck open injector is the correct answer to this question.

Explanation:

Answer:

Football stadium on rocky soil

Skyscraper on bedrock

Apartment building on sandy soil

Explanation:

Answer:

The appropriate answer will be "2353.8 K". A further solution is given below.

Explanation:

The given values are:

Ultimate capacity,

= 1700kN

Resistance factor,

F.S = 0.65

According to the the LRFD, the allowable bearing pressure will be:

⇒ \(Pallo w = \phi_c\times \frac{Pn}{F.S}\)

On substituting the values, we get

⇒             \(=0.9\times \frac{1700}{0.65}\)

⇒             \(=2353.8 \ K\)

According to the the ASD, the allowable bearing pressure will be:

⇒ \(Pallow=\frac{Pn}{\Omega \times F.S}\)

On substituting the values, we get

⇒             \(=\frac{1700}{1.67\times 0.65}\)

⇒             \(= \frac{1700}{1.0855}\)

⇒             \(=1845.35 \ K\)

Answer:

Food and drug admin

Explanation:

Explanation:

To address the requirements for the upgraded Linux system, you will need a minimum of at least 200GB + 100 users * 5GB = 800GB of hard disk space. This will ensure that the database application and associated data, as well as the personal files of the 100 users, can be stored on the system.

In terms of partitions, you will need to create a new partition for the database application and data. This partition should be at least 200GB and should be mounted to a directory such as /data. You will also need to create a partition for the personal files of the users. This partition should be at least 100 users * 5GB = 500GB and should be mounted to a directory such as /home.

Quotas should be implemented on the /home partition to ensure that each user only has a maximum of 5GB of storage space. You can use the quotactl system call or the quota utilities (quotaon, edquota, repquota, etc.) to implement quotas.

To ensure that the system does not exhibit downtime as a result of hard disk errors, you may consider using a redundant array of inexpensive disks (RAID) to provide data protection. A RAID 1 or RAID 10 configuration can be used to mirror the data, so that if one disk fails, the data is still available on another disk.

To implement the new partitions and quotas, the following commands could be used:

To create the new partitions:

fdisk /dev/sda (or other device name)

n (create new partition)

p (primary partition)

1 (partition number)

[Enter] (default first cylinder)

+200G (size of partition for database application and data)

n (create new partition)

p (primary partition)

2 (partition number)

[Enter] (default first cylinder)

+500G (size of partition for user personal files)

w (write changes and exit)

To format the new partitions:

mkfs.ext4 /dev/sda1 (for the database application and data partition)

mkfs.ext4 /dev/sda2 (for the user personal files partition)

To mount the new partitions:

mkdir /data

mount /dev/sda1 /data

mkdir /home

mount /dev/sda2 /home

To implement quotas:

quotacheck -avugm (to check the file system for quotas)

edquota -u [username] (to edit the quota for a specific user)

quotaon /home (to enable quotas on the /home partition)

To add the new partitions to /etc/fstab:

Add the following lines to the file:

/dev/sda1 /data ext4 defaults 0 0

/dev/sda2 /home ext4 defaults,usrquota 0 0

In conclusion, to ensure that the system will perform as needed, you will require at least 800GB of hard disk space, and create two partitions for the database application and data, and user personal files, with quotas implemented on the user personal files partition. The new partitions should be mounted to /data and /home, and entries should be added to the /etc/fstab file to ensure that they are automatically mounted during system boot.

Both Technician A that says that some manufacturers recommend against breaking the cylinder glaze with a glaze breaker and Tech B that says  Flex-Hone is used to help break the cylinder glaze are right.

Deglazing  can be regarded as the techniques that is been used  on the surface of an engine cylinder which is been  roughened to create friction between the moving parts .

Doing this will now give room for engine oil to grip the sides of the cylinder, hence Both Technician A that says that some manufacturers recommend against breaking the cylinder glaze with a glaze breaker and Tech B that says  Flex-Hone is used to help break the cylinder glaze are right.

Learn more about cylinder on:

https://brainly.com/question/76387

#SPJ1

Answer:

A big hazard is falling, whether it be people or equipment. This is why OSHA requires that workers wear hard hats when doing certain jobs.

A hologram is a three-dimensional image that appears to float in the air. They are used in various fields, from entertainment to scientific research, and have become increasingly popular over the past few years.

If we think of a hologram as an output, the field of engineering that will most likely develop holograms for everyday use is the field of electrical engineering.

Holograms use lasers and other optical devices to create three-dimensional images. This technology is used in various fields, including medical imaging, telecommunications, and entertainment. In recent years, advances in holographic technology have made it possible to create more realistic and detailed images, leading to increased interest in the field.

Electrical engineers are responsible for developing and designing electrical systems and devices. They work with a variety of technologies, including holographic displays. Electrical engineers are involved in the design and development of the components that make up holographic displays, such as the lasers and optical devices used to create the images.

Furthermore, they are also involved in the development of the software that controls these devices, as well as the hardware that processes the images. As the demand for holographic displays increases, the field of electrical engineering will continue to play a significant role in the development of these technologies.

In conclusion, the field of electrical engineering is most likely to develop holograms for everyday use. This field is responsible for the design and development of the components and software that make up holographic displays. As the demand for holograms increases, electrical engineers will continue to play a significant role in the development of these technologies.

To know more about hologram visit :

https://brainly.com/question/32133822

#SPJ11

It should be noted that evidence implies that the pressure at J-3 is nearly ninety-eight point seven three psi.

To begin, all pipes must be assigned with flow directions; therefore, let us presume the stream to progress from J-1 through J-2 and finish in J-3.

Consequently, an initial approximation of pressure at each connector can be initiated. Thus, we shall assume that J-2 has a pressure of one hundred psi and J-3 has ninety psi.

Moving forward, we can compute the head loss and quantity of air flowing in every pipe by utilizing the Darcy-Weisbach equation which reads as follows:  hL = f * (L/D) * (V^2/2g) and Q = V * A. Taking into consideration the roughness coefficient of zero point one five times ten-to-the-negative-four foot and Colebrook's equation for calculating friction factor, the eventual pressure at junction three can be identified as about ninety-eight point seven three psi.

Therefore, evidence implies that the pressure at J-3 is nearly ninety-eight point seven three psi.

Learn more about pressure on

https://brainly.com/question/28012687

#SPJ4

Answer:

Option D is correct.

The market for textbooks has a shortage. There will be an upward pressure on price, which will cause quantity demanded to fall and quantity supplied to rise.

Explanation:

The complete question is attached to this solution.

Note that

- The quantity demanded is the negative sloping line in colour blue indicating that the quantity demanded increases as the price of the commodity (textbook) falls and the quantity demanded rises as the price of the textbook falls.

- The quantity supplied is the positive sloping line in colour red/orange indicating that the quantity supplied decreases as the price of the commodity (textbook) falls and the quantity supplied increases as the price of the textbook falls.

The quantity demanded and the quantity supplied balance each other and cross path at a point called the equilibrium point.

The price at this point is called the equilibrium price and the quantity at this point is the equilibrium quantity.

For this question, the equilibrium price = $150 and the equilibrium quantity that matches quantity demanded with quantity supplied = 500.

At prices greater than the equilibrium price, the quantity demanded falls and the quantity supplied increases, hence, there is a surplus of the commodity (textbook) as the quantity of textbooks supplied is way more than the quantity demanded and there is more than required textbooks.

At prices lower than the equilibrium price, the quantity demanded increases and the quantity supplied reduces, hence, there is a shortage of commodity (textbook) as all of the goods supplied are totally bought with extra demand remaining.

When there is a surplus or shortage, the market forces that are responsible for price fixing and quantity demanded work together to take the market back to equilibrium.

So, when the price is higher than equilibrium price and there is a surplus, the market works to reduce the price of the commodity so that quantity demanded can rise and quantity supplied can fall to counter this surplus.

When the price is lower than equilibrium price and there is a shortage, the market works to increase the price of the commodity so that quantity demanded can fall and quantity supplied can rise to counter this shortage.

The price of the textbook in the question, $125, is lower than the equilibrium price, $150, hence, there will be a shortage of textbooks because the quantity demanded, at this price, is higher than the quantity that will be supplied.

So, there is then a pressure on the price to rise back so that the quantity demanded reduces and the quantity supplied increases.

Hope this Helps!!!

It is a kind of periodic motion bounded between two extreme points. For example, Oscillation of Simple Pendulum, Spring-Mass System. The object will keep on moving between two extreme points about a fixed point is called the mean position (or) equilibrium position along any path.

(a) The equation for the piston's position is given as x=(5.00 cm)cos(2t+ 6π )

At t=0,

 x=(5.00 cm)cos( 6π )= 4.33 cm

(b) Differentiating the equation for position with respect to time gives us the piston's velocity:

  v= dt/dx =−(10.0 cm/s)sin(2t+ 6π )

At t=0,v= −5.00 cm/s

​

(c) Differentiating again gives its acceleration:

 a= dv/ dt =−(20.0 cm/s 2 )cos(2t+ 6π )

At t=0,a= −17.3 cm/s 2

(d) The period of motion is

T= ω/2π − 22π = 3.14 s

​

(e) We read the amplitude directly from the equation for x:

                       A= 5.00 cm

​

To know more about harmonic motion visit:-

https://brainly.com/question/28208332

#SPJ4

Using the codes in computational language in JAVA it is possible to write a code that create a puppy class with private property weight and both a getter and a setter for that property called getweight and setweight.

class Puppy {

       constructor(n) {

           // private property

           var name = n

           // methods that use private property

           this.getName = () => {return name}

           this.setName = (n) => {name = n}

           // public property

           this.nickname = n

       }

       // methods that use public property

       setNickname(n) { this.nickname = n }

       getNickname() { return this.nickname }

   }

   p = new Puppy("fido")

   console.log("p.name",p.name) // undefined, not accessible

   console.log("p.getName()",p.getName()) // fido

   console.log("p.getNickname()",p.getNickname()) // fido

   console.log("---")

   p.name = "barker" // defines a new property on this instance of Puppy

   console.log("p.name",p.name) // barker

   console.log("p.getName() ",p.getName()) // doesn't change private name fido

   console.log("---")

   p.setName("fuzz") // change private name

   console.log("p.getName()",p.getName()) // fuzz

   console.log("p.getNickname()",p.getNickname()) // fido

   console.log("---")

   p.nickname = "chewy" // set public property directly

   console.log("p.getNickname()",p.getNickname()) // chewy

See more about JAVA at brainly.com/question/18502436

#SPJ1

The connection between the grounded bar in the panel board and the case of the panel board is called a bonding connection.

This connection ensures that the metallic parts of the panel board are all connected to the same potential. It also provides a low-resistance path for fault current to flow through, allowing circuit breakers to trip when a fault is detected.

A bonding connection is an essential part of a panel board and is often required by code. It works by connecting all of the metallic parts of the panel board, such as the neutral and ground bars, to the same potential.

This ensures that the panel board is properly grounded and that any fault current that may occur is safely conducted away.

Learn more about bonding connection:

https://brainly.com/question/18258856

#SPJ4

Explanation:

Dry air doesn't contain water vapor .

Explanation:

mathematics education grade 7

The Mylar reflective coatings for thermal control are susceptible to atomic oxygen (AO) erosion, which can cause various damages on the surfaces of spacecraft. As a result, when designing spacecraft, it is important to take into account the long-term effects of atomic oxygen erosion on the materials used for thermal control.

The following are some of the critical points that should be considered when dealing with atomic oxygen erosion:Atomic oxygen is highly reactive and can cause several effects on the Mylar surface. Therefore, the choice of coating material is critical in ensuring that the surface of the spacecraft is protected from the effects of atomic oxygen erosion.The Erosion Yield of 3.2x10-24 cm3 for Mylar applications refers to the amount of material eroded due to the impact of atomic oxygen ions. It represents the volume of material that is eroded per unit of ion fluence or atomic oxygen flux.

The volume of material eroded will depend on the number of atomic oxygen ions that impinge on the surface of the Mylar. Therefore, the Erosion Yield is a measure of the material's resistance to atomic oxygen erosion.A LEO of 250 km is a relatively low altitude for spacecraft, which means that the satellite will be exposed to a high flux of atomic oxygen ions. The Solar Flux of 100 is also high, which increases the likelihood of atomic oxygen erosion. Therefore, the expected erosion of the Mylar due to atomic oxygen at End of Life can be significant.

In conclusion, the expected erosion of the Mylar due to atomic Oxygen at End of Life will depend on several factors, including the choice of coating material, the Erosion Yield, the Solar Flux, and the altitude of the spacecraft. However, based on the given parameters, the expected erosion of the Mylar is likely to be significant. It is important to ensure that the design of the spacecraft takes into account the long-term effects of atomic oxygen erosion on the materials used for thermal control.

To know more about atomic visit :

https://brainly.com/question/29695801

#SPJ11

Answer:

Explanation:

Wow

The mean of the 50 values is 80. The median of the 50 values is 76.

What is median?

A statistical measure known as the median is used to pinpoint the data set's middle value. It is often used to measure central tendency, which is the average value in a set of data. To calculate the median, the numbers in the set must be arranged in numerical order and the middle number is identified. If the set contains an even number of numbers, the median is calculated by taking the mean of the two middle numbers. The median provides an accurate representation of the data set when there are outliers, or extreme cases, present in the data. It is also helpful when analyzing data that is not normally distributed and is often used in the field of finance.

X   Relative Frequency
10  0.3
20  0.2
30  0.1
40  0.2
50  0.2
The mean of the values of X is 36. The median of the values of X is 40.

To learn more about median
https://brainly.com/question/15182342
#SPJ4

Answer:

The government would have less power to control the cost of electricity from privately funded projects.

Explanation:

According to the given excerpt, the government, the government decided to take over most of the hydroelectric power projects as opposed to privately owned corporations which previously held a monopoly. The major reason was to provide low-cost energy to consumers.

This decision taken by the government to use the Army Corps of Engineers to undertake hydroelectric power projects instead of allowing private businesses to undertake them was to allow the government have more power to control the cost of electricity.

False: Computer simulation can be both time-consuming and expensive, especially for complex systems.True: Analytical methods are generally preferred if they can provide accurate and efficient solutions.

True: A simulation clock keeps track of the simulation's progress in real time.True: A simulation model is often represented using a flow diagram to visualize the flow of activities or processes.False: A smaller confidence interval is desirable as it indicates a more precise estimate within a narrower range.True: The standard error provides an indication of the accuracy of the estimated mean.

False: The sensitivity chart in RSPE (Risk Solver Platform for Education) shows the impact on the uncertain variable cell, not the results cell.False: The geometric distribution describes the number of trials until the first success, not the number of times an event occurs in a fixed number of trials.False: The normal distribution is defined for values ranging from negative infinity to positive infinity.False: ASPE (Analysis of Standard Probability Estimates) can be used to fit both continuous and discrete distributions to data.

Learn more about Computer here

https://brainly.com/question/28498043

#SPJ11

We created a program that alternates between the localization, steering, and navigation modules. The navigation module implements a routing algorithm and selects the global route.

A program is described as a set of instructions that a computer executes to do a certain activity. Study programs are made to fit your specific learning needs and get you ready for more education, training, or work.

Navigation modules are defined as the interactions that let users move between, inside of, and outside of the various pieces of content in your app. Extra parts are frequently included in the modules to make the sensor easier to use.

Thus, we created a program that alternates between the localization, steering, and navigation modules. The navigation module implements a routing algorithm and selects the global route.

To learn more about program, refer to the link below:

https://brainly.com/question/3224396

#SPJ1