prepare the flood-frequency curve by the empirical method for the annual peak- discharge data of problem 11.9 on lognormal probability paper. determine the exceedance probability of a flood of 100 m3/s. what is the magnitude of flood of a 200-year return period?
Answers
The flood event that would be exceeded, on average, once every 200 years is the flood event with a rank of 0.505. We can read off the discharge value for this rank from the empirical flood-frequency curve and determine its magnitude.
To prepare the flood-frequency curve by the empirical method for the annual peak-discharge data on the lognormal probability paper, we need to plot the discharge values on the x-axis and their corresponding exceedance probabilities on the y-axis. The exceedance probability is the probability of a flood of that magnitude or higher occurring in any given year.
]To determine the exceedance probability of a flood of 100 m3/s, we need to find the point on the curve where the discharge value is 100 \(m^{3}\)/s and read off the corresponding exceedance probability from the y-axis. Let's assume that the point on the curve is at an exceedance probability of 0.05 or 5%.
The magnitude of a flood of a 200-year return period can be calculated using the equation:
T = (n+1) / m
where T is the return period in years, n is the number of years in the record, and m is the rank of the flood event. For a 200-year return period, we need to find the rank of the flood event that would be exceeded, on average, once every 200 years.
Assuming that the record includes 100 years of data, the rank of the flood event can be calculated using the equation:
m = (n+1) / T
m = (100+1) / 200
m = 0.505
Learn more about frequency here: https://brainly.com/question/5102661
#SPJ11
Related Questions
A mechanic's lien would be properly classified as a(n):
A. Equitable lien
B. Involuntary lien
C. General lien
D. Unstatutory lien
Answers
Consequently, the correct answer is B. Involuntary lien.
A mechanic's lien would be properly classified as a(n) involuntary lien.
What is a mechanic's lien?
A mechanic's lien is a type of legal claim granted to builders, contractors, and other professionals who provide labor or supplies for the construction or improvement of buildings and structures on behalf of the property owner.
The mechanic's lien is the professional's right to sue the owner of the building or land for non-payment if they have delivered materials or services to the property but have not been paid.
In the context of real estate law, a mechanic's lien is an involuntary lien, which means that the lien is imposed on the owner's property by operation of law and without the owner's consent. This sort of lien is known as a general lien.Involuntary liens are imposed on a property by law or without the property owner's consent, such as taxes, judgments, or mechanic's liens. In contrast to voluntary liens, which are agreements made between the owner and the creditor, involuntary liens are imposed by law without the owner's consent
Learn more about real estate:
https://brainly.com/question/29124410
#SPJ11
It is recommended to use a Poisson process to model the number of failures in commercial water
pipes, the estimates of the failure rate are given, in units of failures per 100 km of pipe per day,
Answers
A Poisson process is a statistical model that describes the occurrence of rare events over time or space. It is commonly used to model the number of failures in commercial water pipes.
One of the advantages of using a Poisson process to model the number of failures in commercial water pipes is that it allows for the calculation of the probability of multiple failures occurring within a given time period. For example, if the failure rate is estimated to be 1 failure per 100 km of pipe per day, the probability of two failures occurring in a 24 hour period can be calculated.
In addition, the Poisson process can be used to determine the expected number of failures over a given time period. For example, if the failure rate is estimated to be 1 failure per 100 km of pipe per day, the expected number of failures over a 30-day period would be 30 failures.
In conclusion, the Poisson process is a useful statistical model for estimating the number of failures in commercial water pipes. It allows for the calculation of the probability of multiple failures occurring within a given time period, as well as the expected number of failures over a given time period. However, it is important to consider the assumptions of the model and to be aware of potential sources of variation in the rate of failures over time.
To know more about model visit:
https://brainly.com/question/32196451
#SPJ11
does anyone know how i can make my LED lights be sticky again? they keep falling :/
Answers
What is the meaning of beauty and completeness? In relation to these what are the attributes a Muslim should adopt?
Answers
ᴄᴏᴍᴘʟᴇᴛᴇɴᴇꜱꜱ ᴍᴇᴀɴꜱ ᴛʜᴇ ꜱᴛᴀᴛᴇ ᴏꜰ ʙᴇɪɴɢ ᴄᴏᴍᴘʟᴇᴛᴇ ᴀɴᴅ ᴇɴᴛɪʀᴇ; ʜᴀᴠɪɴɢ ᴇᴠᴇʀʏᴛʜɪɴɢ ᴛʜᴀᴛ ɪꜱ ɴᴇᴇᴅᴇᴅ.
ʙᴇᴀᴜᴛʏ ᴍᴇᴀɴꜱ combination of qualities, such as shape, colour, or form, that pleases the aesthetic senses, especially the sight.
can you give me a paragraph on What is Electrical Engineering and why is it considered the largest branch of Engineering? I really need help.
Answers
Electrical engineering is one of the newer branches of engineering, and dates back to the late 19th century. It is the branch of engineering that deals with the technology of electricity. Electrical engineers work on a wide range of components, devices and systems, from tiny microchips to huge power station generators.
Always in demand: the technology sector grew rapidly in the last decades and so did the demand for those who create, understand and develop electrical control systems, which means good job opportunities for you after graduation.
High salaries: as an electrical engineer, you will begin your career higher on the salary ladder than e.g. teachers or social science graduates.
Future technologies: electrical engineering is at the forefront of developing new technologies for a number of industries including those of transport, healthcare, construction and robotics.
TLDR: Electrical Engineering is about working with electronics and technology, it’s big due to the fact that it’s high paying and technology constantly evolves.
Bruce wants to present to his client in architectural drawing that shows the exact details of a living room kitchen bedroom and stairs in relation to other areas of the house which type of architectural drawings should Bruce use?
Answers
Answer:
section view in a general plan.
Explanation:
In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.
Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.
Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.
Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.
In this scenario, Bruce wants to present to his client an architectural drawing that shows the exact details of a living room, kitchen, bedroom and stairs in relation to other areas of the house. Thus, the type of architectural drawings Bruce should use is a section view in a general plan.
A section view presents a vertical perspective or view by slicing through the building; revealing the exact details of wall construction, floor-to-floor construction, height and thickness of beam, and other support systems with respect to the living room, kitchen, bedroom, etc., in the building.
16. For shop spllls larger than 12 gallons or 100 pounds, contact the
A) O National Response Center
B) O City where your shop is located
c) O Centers for Disease Control and Prevention (CDC)
D) O County where your shop is located
Answers
Answer:
For shop spills larger than 12 gallons or 100 pounds, contact the National Response Centre. Option(A).
Explanation:
The National Response Centre (NRC) is a piece of the governmentally settled National Response System and staffed 24 hours per day by the U.S. Coast Guard.
It is the assigned government resource for announcing all oil, synthetic, radiological, organic and etiological releases into the climate, anyplace in the United States and its regions. The NRC likewise takes oceanic reports of dubious action and security breaks inside the waters of the United States and its regions.Learn more about national response refer:
https://brainly.com/question/12702845Answer:
A
Explanation:
In order for communication to be considered two-way, _________ is necessary a. channel b. message c. noise d. feedback e. circuit
Answers
Answer:
the answer c or e or do wha t the first guy do
In the quadratic probing hash table, suppose that instead of inserting a new item into the location suggested by quadratic probing algorithm, we insert it into the first inactive cell on the search path (thus, it is possible to reclaim a cell that is marked "deleted," potentially saving space). a. Rewrite the insertion algorithm to use this observation. b. Explain the circumstances under which the revised algorithm is faster than the original algorithm. Can it be slower?
Answers
a. To modify the quadratic probing algorithm to insert an item into the first inactive cell on the search path, we need to make a change to the insert() function. The new insert() function should follow the steps given below:
1. Calculate the hash value for the new item.
2. If the hash table has an empty cell at that position, insert the new item there.
3. If the cell is marked as deleted, insert the new item there.
4. If the cell is occupied, start probing by adding 1, 3, 5, 7... to the hash value and calculate new positions. Check each position in turn, and if it is empty or marked as deleted, insert the new item there.
b. The revised algorithm is faster than the original algorithm when there are many deleted cells in the hash table, as it allows us to reclaim these cells instead of having to probe further. However, it can be slower when the hash table is almost full and there are no deleted cells available for reuse. In this case, the revised algorithm will have to probe more and may take more time than the original algorithm. It is important to note that the revised algorithm saves space by reusing deleted cells, but this may come at the cost of slower performance in certain situations.
To know more about Algorithm visit :
https://brainly.com/question/15862081
#SPJ11
The cars of a roller-coaster ride have a speed of 30 km / h as they pass over the top of the circular track. Neglect any friction and calculate their speed v when they reach the horizontal bottom position. At the top position, the radius of the circular path of their mass centers is 18 m, and all six cars have the same mass.
Answers
Answer:
Explanation:
30 we know that radius is 18 and the circumference is 36pi and the time to go around is is 36pi/30=1.2pi≈3.76991118
Describe why the motion of a follower acted on by a cam is periodic motion.
Answers
If = (4,0,3) =(−2,1,5). Find ||, and the vectors (+),(−) ,3 (2+5)
Answers
The vectors are magnitude of vector v is 5. The sum of vectors v1 and v2 is (+) = (2, 1, 8). The difference between vectors v1 and v2 is (-) = (6, -1, -2). The scalar multiple of vector v1 by 3 is 3(2, 0, 3) = (12, 0, 9).
To find the magnitude (||) of a vector, we can use the formula:
||v|| = sqrt(v1^2 + v2^2 + v3^2)
Given vector v = (4, 0, 3), we can calculate its magnitude as follows:
||v|| = sqrt(4^2 + 0^2 + 3^2)
= sqrt(16 + 0 + 9)
= sqrt(25)
= 5
Therefore, the magnitude of vector v is 5.
Now, let's find the sum (+) and difference (-) of the given vectors.
Given vectors v1 = (4, 0, 3) and v2 = (-2, 1, 5), the sum of these vectors is calculated by adding the corresponding components:
v1 + v2 = (4 + (-2), 0 + 1, 3 + 5)
= (2, 1, 8)
The difference between the vectors is found by subtracting the corresponding components:
v1 - v2 = (4 - (-2), 0 - 1, 3 - 5)
= (6, -1, -2)
Lastly, let's calculate the scalar multiple of vector v1:
3v1 = 3(4, 0, 3)
= (12, 0, 9)
Therefore, the vectors are as follows:
- The magnitude of vector v is 5.
- The sum of vectors v1 and v2 is (+) = (2, 1, 8).
- The difference between vectors v1 and v2 is (-) = (6, -1, -2).
- The scalar multiple of vector v1 by 3 is 3(2, 0, 3) = (12, 0, 9).
Learn more about magnitude here
https://brainly.com/question/14943747
#SPJ11
Integer dataSize is read from input. Then, strings and integers are read and stored into string vector colorList and integer vector quantityList, respectively. Lastly, string colorAsked is read from input.
Find the sum of the elements in quantityList where the corresponding element in colorList is equal to colorAsked.
For each element in colorList that is equal to colorAsked, output "Index " followed by the element's index. End with a newline.
Ex: If the input is:
3
lavender 25 lavender 22 gray 161
lavender
Then the output is:
Index 0
Index 1
Total: 47
#include
#include
using namespace std;
int main() {
int numElements;
string colorAsked;
int sumQuantity;
unsigned int i;
cin >> numElements;
vector colorList(numElements);
vector quantityList(numElements);
for (i = 0; i < colorList.size(); ++i) {
cin >> colorList.at(i);
cin >> quantityList.at(i);
}
cin >> colorAsked;
/*answer here*/
cout << "Total: " << sumQuantity << endl;
return 0;
}
Answers
Where the above condition is given, here's the solution:
#include <iostream>
#include <vector>
#include <string>
using namespace std;
int main() {
int numElements, sumQuantity = 0;
string colorAsked;
unsigned int i;
cin >> numElements;
vector<string> colorList(numElements);
vector<int> quantityList(numElements);
for (i = 0; i < colorList.size(); ++i) {
cin >> colorList.at(i);
cin >> quantityList.at(i);
}
cin >> colorAsked;
for (i = 0; i < colorList.size(); ++i) {
if (colorList.at(i) == colorAsked) {
cout << "Index " << i << endl;
sumQuantity += quantityList.at(i);
}
}
cout << "Total: " << sumQuantity << endl;
return 0;
What is the explanation of the above code?
First, we declare an integer variable sumQuantity to keep track of the sum of quantities of elements in quantityList where the corresponding element in colorList is equal to colorAsked.We read the integer numElements from input.We declare two vectors colorList and quantityList with numElements elements each.We use a loop to read each string and integer from input and store them in colorList and quantityList, respectively.We read the string colorAsked from input.We use another loop to iterate through colorList and check if each element is equal to colorAsked. If it is, we output "Index " followed by the element's index and add the corresponding quantity from quantityList to sumQuantity.Finally, we output the total sum of quantities in sumQuantity.
Learn more about vectors on:
https://brainly.com/question/13322477
#SPJ1
The sections of piping immediately upstream and downstream of a primary flow measuring device are known as
Answers
The sections of piping immediately upstream and downstream of a primary flow measuring device are known as the "straight run."
The straight run refers to the lengths of piping that are required to be present immediately upstream and downstream of a primary flow measuring device. These sections of piping are necessary to ensure that the flow profile is fully developed and unaffected by any disturbances caused by bends, fittings, or obstructions in the pipe. The straight run allows the fluid to flow smoothly and uniformly before entering or exiting the flow measuring device, ensuring accurate and reliable measurements.
By providing sufficient straight run lengths, the flow profile becomes stable, minimizing turbulence and disturbances that could impact the accuracy of the flow measurement.
You can learn more about flow measuring device at
https://brainly.com/question/13427342
#SPJ11
a 1-w, 350-ω resistor is connected to 24 v. Is this resistor operating within its power rating?
Answers
Answer:
No.
Explanation:
\(P_r\) = Power rating = 1 W
R = Resistance = \(350\ \Omega\)
V = Voltage = \(24\ \text{V}\)
Power is given by
\(P=\dfrac{V^2}{R}\\\Rightarrow P=\dfrac{24^2}{350}\\\Rightarrow P=1.65\ \text{W}\)
\(1.65\ \text{W}>1\ \text{W}\)
So
\(P>P_r\)
Hence, the resistor is not operating within its power rating.
the device is used to measure a change in temperature. bars ab and cd are made of a-36 steel and 2014-t6 aluminum alloy respectively. when the temperature is at 80 ∘f, ace is in the horizontal position.
Answers
Based on the given information, we can infer that the device mentioned is a bimetallic strip or a bimetal thermometer. A bimetallic strip consists of two metal strips bonded together, each having a different coefficient of thermal expansion.
As temperature changes, the different rates of expansion of the two metals cause the strip to bend or twist, which can be used to measure temperature changes.
In this case, bars AB and CD are made of different materials: A-36 steel and 2014-T6 aluminum alloy, respectively. Each material has its own specific coefficient of thermal expansion. When the temperature is at 80 °F, it appears that point ACE is in the horizontal position, indicating that the bimetal strip is in equilibrium at this temperature.
The bimetal strip's ability to bend or twist in response to temperature changes makes it a useful device for measuring temperature variations. The specific properties and behavior of the A-36 steel and 2014-T6 aluminum alloy, including their coefficients of thermal expansion, play a role in determining the response of the bimetal strip to temperature fluctuations.
Learn more about expansion here
https://brainly.com/question/13231442
#SPJ11
The set of line styles and line thickness used on drawings used on drawings are referred to as the ____.
Answers
Answer:
I think it's referred as the outline
A pinion and gear pair is used to transmit a power of 5000 W. The teeth numbers of pinion
and gear are 20 and 50. The module is 5 mm, the pressure angle is 20o
and the face width is 45 mm. The
rotational speed of pinion is 300 rev/min. Both the pinion and the gear material are Nitralloy 135 Grade2 with a hardness of 277 Brinell. The quality standard number Qv is 5 and installation is open gearing
quality. Find the AGMA bending and contact stresses and the corresponding factors of safety for a
pinion life of 109
cycles and a reliability of 0.98
Answers
Answer:
mark me as a brainleast
Explanation:
209781
The rafter is fastened to the outside wall so that the plumb cut in the birdsmouth is tight to the exterior wall sheathing
Select one:
O True
O False
Answers
Which of the following defines context?
the ability to find new ways of thinking about a problem
the condition in which a problem exists
the study of the theoretical nature of an event
the problem-solving technique of an engineer
Answers
Answer:
The condition in which a problem exists
Explanation:
Context is the situation surrounding information, e.g. if you don't understand a word in a passge you can look for "context clues" where you use surrounding words to infer the meaning of the unknown one
which building construction type is referred to as noncombustible or protected noncombustible?
Answers
Building construction type that is referred to as noncombustible or protected noncombustible is Type II construction. The Type II construction is a building type that is made of non-combustible materials.
This type of construction features structural elements of concrete, steel, and masonry, which are non-combustible materials.
Type II construction, which is referred to as noncombustible or protected noncombustible, is a construction type that is required for structures taller than four stories or 50 feet. This type of construction has a fire-resistance rating of at least two hours. It is because fire resistance and non-combustible materials are very important for the safety of any building.
Architects use non-combustible materials, including concrete, steel, and masonry, to ensure the building is protected from fire.
Wood is used in this type of construction, but it is used in limited areas that aren't exposed to flames or heat. Roofs and floors are made of concrete or reinforced concrete to provide maximum fire protection. Fire safety features, including sprinkler systems and fireproof barriers, are installed to further enhance the safety of the building.
Type II construction, also known as noncombustible or protected noncombustible, is a construction type that is used in buildings taller than four stories or 50 feet.
The building has a fire-resistance rating of at least two hours and is made of non-combustible materials, including concrete, steel, and masonry. Fire safety features, such as sprinkler systems and fireproof barriers, are installed to further protect the building from fire.
To know more about Building construction :
brainly.com/question/30601446
#SPJ11
2.2.2 Make a list of the electronic components that could be used in making this product (energy saving switch).
Answers
The electronic components that could be used in making of energy saving switch are:
Transistors semiconductor devices CapacitorsCoils (inductors) Which electronic component is used as a switch?Transistors as well as other kinds of semiconductor devices are known to be tools or element that can be used in the making of switches. In its use or applications.
Note that the base or gate of a transistor, based on the kind of transistor that is known to be in use, and it is one that is often employed as a form of control element to be able to switch on as well as switch off the current that often exist between the emitter as well as the collector or the source and that of the drain.
Note also that the electronic components that are able to store energy in regards to electronic devices, are known to be capacitors and coils (inductors) and they often play a key function of temporarily saving energy. One key role of a capacitor is to save an electric charge.
Therefore, The electronic components that could be used in making of energy saving switch are:
Transistors semiconductor devices CapacitorsCoils (inductors)Learn more about energy saving switch from
https://brainly.com/question/24670770
#SPJ1
Rank the following iron–carbon alloys and associated microstructures from the highest to the lowest tensile strength:
(a) 0.25 wt%C with spheroidite,
(b) 0.25 wt%C with coarse pearlite,
(c) 0.60 wt%C with fine pearlite, and
(d) 0.60 wt%C with coarse pearlite.
Answers
Answer:
adcb i believe the answer is
what scale model proves the initial concept?
Answers
Answer: A prototype
Explanation:
The scale model that proves the initial concept is called a domain model.
What is a scale model?A copy or depiction of something where all parts have the same dimensions as the original. A scale model is an image or copy of an object that is either larger or smaller than the object being represented's actual size.
A domain model is a type of conceptual model that is used to depict the structural elements and conceptual constraints within a domain of interest.
A domain model will include all of the entities, their attributes, and relationships, as well as the constraints that govern the conceptual integrity of the structural model elements that comprise that problem domain.
Therefore, a domain model is the scale model that proves the initial concept.
To learn more about the scale model, refer to the below link:
https://brainly.com/question/14341149
#SPJ2
List 3 specific things you can do with a Tape measure (not just measure things)
Answers
how wide things could be and how long
Answer:
See how many inches are in a foot
measure width and hight of places
Nail grabbing
Explanation:
Answer this in 30min please
Direction: Read and answer the following questions briefly. [20 marks] on your understanding of this a. List the difference between outlier and noise( 2 marks: 1 mark each) b. Discuss any 4 challenges
Answers
These are just a few challenges in data analysis, and the field is continuously evolving with new challenges emerging as data and technologies advance.
Difference between outlier and noise: Outlier: An outlier is an observation or data point that deviates significantly from the other data points in a dataset. It is an extreme value that lies outside the expected range or pattern of the data. Outliers can be caused by various factors such as measurement errors, data entry errors, or rare events. Outliers can have a significant impact on statistical analysis and modeling.
Noise: Noise refers to random variations or fluctuations in data that do not follow any specific pattern or signal. It is typically caused by various sources of interference, measurement errors, or inherent variability in the data. Noise can make it challenging to extract meaningful information or patterns from data and can affect the accuracy of data analysis and modeling.
b. Challenges in data analysis:
Data quality and preprocessing: Ensuring data quality and dealing with missing values, outliers, and noise is a significant challenge in data analysis. It requires careful preprocessing steps such as data cleaning, imputation, and outlier detection and handling.
Scalability and handling large datasets: With the increasing volume of data generated, analyzing and processing large datasets pose challenges in terms of computational resources, storage, and efficient algorithms. Handling big data requires specialized tools and techniques to ensure efficient processing and analysis.
Complexity and dimensionality: Many real-world datasets are complex and high-dimensional, with numerous variables or features. Analyzing such datasets poses challenges in understanding the relationships and patterns among variables, performing feature selection, and avoiding overfitting in models.
Privacy and ethical concerns: Data analysis often involves working with sensitive and personal information, raising concerns about privacy and ethical considerations. Ensuring data privacy, obtaining proper consent, and adhering to ethical guidelines are crucial challenges in data analysis, particularly in fields like healthcare and finance.
Learn more about technologies here:
https://brainly.com/question/30292609
#SPJ11
Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA
approval for a new drug for diabetics. The new drug is expected to bring in billions of dollars for the company. Lydia is acquainted with Bradley,
the CSHO on rotation for OSHA inspections. Lydia is concerned that a surprise inspection may turn up violations, which could affect the launch of
the drug. Lydia reaches out to Bradley and casually mentions that it would be helpful if he could tell her when the next OSHA inspection will be
Should Bradley give Lydia advance notice about an upcoming inspection?
No, because he could receive fines and a jail term.
No, because this situation does not meet the criteria for advance notice.
Yes, because employers may request an OSHA inspection at any time.
Yes, because the inspection will be conducted during regular business hours.
Answers
It is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection.
Describe the medium/long-range transportation options available to people prior
to and after the Industrial Revolution.
Answers
Answer:
answer below:
Explanation:
Before the Industrial Revolution, transportation relied on animals (like horses pulling a cart) and boats. Travel was slow and difficult. It could take months to travel across the United States in the early 1800s before industrial revolution
The Industrial Revolution completely changed the way people traveled and how goods were transported.
the problem of traveling upstream was solved during the industrial revolution by the steam engine. in order to make better use of water transportation, canals were build to connect rivers, lakes and oceans. the invention of the railroad and the steam powered locomotive opened up a whole new world in transportation. even with steamboats and railroads, people still needed a better wat to travel between rivers and train stations. a new process called the "macadam " process was used to create smooth gravel roads
I hope this helps a bit.
Tech A says that all hazards can be removed from a shop. Tech B says that you should disconnect an air gun before inspecting it. Who is correct
Answers
According to the question of disconnecting an air gun before inspection, tech B is correct.
What is gun?
Gun is a type of weapon that is typically used to fire bullets at a target. It is typically composed of a barrel, a chamber, a firing mechanism, and ammunition. Guns have been used for centuries as a tool for hunting, self-defense, and warfare. Guns are typically categorized by the type of ammunition they use, such as pistol, shotgun, or rifle. Guns can be used to shoot at a variety of targets, such as animals, clay pigeons, and even human targets. Guns are also used in competitive shooting sports. Although guns can be used for a variety of purposes, they have the
Although it is not possible to completely remove all hazards from a shop, it is important to take precautions such as disconnecting an air gun before inspecting it to help reduce the risk of injury.
To learn more about gun
https://brainly.com/question/17037232
#SPJ4
Most NetBIOS enumeration tools connect to the target system by using which of the following? a) ICMP packets O b) Default logons and blank passwords c) Null sessions d) Admin accounts
Answers
Answer:
Explanation:Most NetBIOS enumeration tools connect to the target system by using null sessions.