The steady-state output of the closed-loop system, with an open-loop transfer function of 5/(2s+1), due to the input signal r(t) = sin(t + 30), can be determined by calculating the transfer function's frequency response at the input frequency.
In the given problem, the open-loop transfer function of the unity feedback system is G(s) = 5/(2s+1). To find the steady-state output of the closed-loop system, we need to evaluate the frequency response of the transfer function at the input frequency. The input signal r(t) = sin(t + 30) can be expressed as a sinusoidal function with angular frequency ω = 1 and a phase shift of 30 degrees. By substituting s = jω into the transfer function G(s), where j is the imaginary unit, we can determine the frequency response. Plugging in ω = 1 into the transfer function, we get G(j) = 5/(2j+1). To simplify this expression, we multiply the numerator and denominator by the complex conjugate of the denominator, which is 2j-1. This yields G(j) = 5(2j-1)/(2j+1)(2j-1). Expanding the expression, we have G(j) = (10j - 5)/(4j^2 - 1). Substituting j = √(-1), we find G(j) = (10√(-1) - 5)/(4(-1) - 1) = (-5 + 10√(-1))/(1 - 4) = (-5 + 10√(-1))/(-3). Simplifying further, we get G(j) = (5/3) - (10/3)√(-1). Since the input frequency is ω = 1, the steady-state output of the closed-loop system is equal to the magnitude of the frequency response at ω = 1, which is |G(j)| = sqrt((5/3)^2 + (10/3)^2) = sqrt(125/9) ≈ 3.97. Therefore, the steady-state output of the closed-loop system due to the input signal r(t) = sin(t + 30) is approximately 3.97.
Learn more about sinusoidal function here :
https://brainly.com/question/21008165
#SPJ11
The open-loop transfer function of a unity feedback system is
G(s) = 5/(2s+1) Determine the steady-state output of the closed-loop system due to the following input signals: r(t) = sin(t +30)
arguments passed to a function that has a non-constant reference parameter must be:
When framing a wall, temporary bracing is
used to support, plumb, and straighten the wall.
used to support, level, and straighten the wall.
used to square the wall before it is erected.
removed before the next level is constructed.
Sadie is the props manager for a small community theater. Because she does not have a part onstage, Sadie is not part of the Performing Arts pathway of the Arts, AV Technology and Communication cluster.
True
False
Answer:
I think it is false!
Explanation:
Answer: I think it's true
Explanation:
Because if you were part of a play, you would have a part but if you work on props, you don't have a part onstage.
2. Because she has a Victim mindset and having low grade in her Math class, Julianna believes
O a. her low grades are the fault of her unfair teacher.
O b. she needs to take an easier class.
O c. that working with a tutor is the only way for her to pass the class.
O d. she can improve her grades if she studies more.
Because she has a Victim mindset and having low grade in her Math class, Julianna believes: A. her low grades are the fault of her unfair teacher.
What is a Victim mindset?A Victim mindset is also referred to as victim mentality and it can be defined as an acquired personality trait in which an individual tends to recognize and believe that the negative and unfair actions of others towards him or her, is responsible for the bad and unpleasant things that happens.
This ultimately implies that, an individual with a Victim mindset is prejudiced and strongly believes that every other person is against him or her, and as such these people are responsible for their failures.
Read more on Victim mindset here: https://brainly.com/question/17116209
#SPJ1
First, determine the support reaction at A and B. Next, intuit the shape of the shear diagram directly beneath the figure. Then evaluate shear and bending for member AB by completing the shear and bending diagrams. On this submission form show only the completed V and M diagrams, with left cut section FBD and shear and moment equations to the right. Also determine the location of maximum bending
In conclusion, to solve this problem, we need to determine the support reactions, intuit the shape of the shear diagram, complete the shear and bending diagrams, show only the completed V and M diagrams on the submission form, and determine the location of maximum bending.
To determine the support reactions at A and B, we need to analyze the equilibrium of the structure. By applying the equations of equilibrium (sum of forces and sum of moments equal to zero), we can calculate the vertical and horizontal reactions at these points.
After determining the support reactions, we can intuit the shape of the shear diagram directly beneath the figure. The shear diagram represents the variation of shear forces along the length of member AB. To draw the shear diagram, we need to identify the points where the shear changes and the magnitude of these changes.
Next, we can evaluate the shear and bending for member AB by completing the shear and bending diagrams. The bending diagram shows the variation of bending moment along member AB, while the shear diagram shows the variation of shear force.
On the submission form, only the completed V (shear) and M (bending) diagrams should be shown, along with a left cut section free body diagram (FBD) and the shear and moment equations to the right.
To determine the location of maximum bending, we can observe the bending moment diagram. The point where the bending moment is maximum corresponds to the location where the member experiences the greatest bending stress.
In conclusion, to solve this problem, we need to determine the support reactions, intuit the shape of the shear diagram, complete the shear and bending diagrams, show only the completed V and M diagrams on the submission form, and determine the location of maximum bending.
To know more about bending diagrams visit:
https://brainly.com/question/12950078
#SPJ11
A basic 3-input logic circuit has a LOW on one input and a HIGH on the other two inputs, and the output is LOW. What type of logic circuit is it
Answer:
any of AND, NOR, XOR
Explanation:
An AND gate will give a Low output for any input Low. The logic circuit could be an AND gate.
A NOR gate will give a Low output for any input High. The logic circuit could be a NOR gate.
An XOR gate will give a Low output for an even number of High inputs. The logic circuit could be an XOR gate.
The logic circuit could be any of ...
AND or NOR or XOR
__
Additional comment
What you consider a "basic" gate is not defined here. All of these are catalog items. If you consider only AND, OR, and NOT to be the basic gates, then your answer is AND.
Please help I need by today !!
What is the purpose of a portfolio?
Answer:
To document your work and projects.
Explanation:
I hope I got the right meaning. :)
AWi-Fi router has a MTB of 10 month. What is the Availability, if th hours and the number of days in a month is 307 99. 8316 100% $98. 80 $76. 20
The question is asking for the availability of a Wi-Fi router with an MTB (Mean Time Between) failure of 10 months. However, the provided numbers and information seem to be unrelated to the calculation of availability. To calculate availability, we need the uptime and the total time.
To calculate the availability of the Wi-Fi router, we need to know the uptime and downtime values. However, the given information does not provide these values. Without the uptime and downtime, it is not possible to calculate the availability accurately.
Availability is typically calculated using the following formula:
Availability = Uptime / (Uptime + Downtime)
It is important to note that availability is a measure of how reliably a system or service is accessible to users. It is usually expressed as a percentage, where higher percentages indicate better availability.
To know more about information visit:
https://brainly.com/question/31592475
#SPJ11
46.5 kg (102.3 lb) of fine aggregate is mixed with 72.3 kg (159.1 lb) of coarse aggregate. the fine aggregate has a moisture content of 2.0% and absorption of 3.4%, whereas the coarse aggregate has a moisture content of 1.3% and absorption of 3.8%. what is the amount of water required to increase the moisture contents of both fine and coarse aggregates to reach absorption?
The amount of water required to increase the moisture contents of both fine and coarse aggregates to reach absorption 2.418 kg total 0.638kg fine 1.78 kg coarse.
What are coarse aggregates?Coarse aggregates are any particles greater than 0.19 inch, but generally range between 3/8 and 1.5 inches in diameter. Gravels constitute the majority of coarse aggregate used in concrete with crushed stone making up most of the remainder.
What is an example of coarse aggregate?Coarse aggregates are a construction component made of rock quarried from ground deposits. Examples of these kinds of ground deposits include river gravel, crushed stone from rock quarries, and previously used concrete.
To know more about Coarse aggregates visit:
https://brainly.com/question/28964237
#SPJ4
The ______________ sets the objective that the Sprint should achieve although it can be influenced by the Scrum Team.
The Sprint Goal sets the objective that the Sprint should achieve although it can be influenced by the Scrum Team. The Sprint Goal is a clear, concise statement that describes the purpose of the Sprint and what the Scrum Team plans to accomplish during the Sprint.
It serves as a guide for the development team and helps them stay focused on what needs to be done. The Sprint Goal is defined during the Sprint Planning meeting and is based on the Product Backlog items selected for the Sprint.The Sprint Goal is an important part of the Scrum framework as it provides a shared understanding of what the team is working towards and why. It helps the team prioritize their work and ensures that everyone is working towards the same objective. The Sprint Goal is also used as a tool to measure progress during the Sprint. The team can evaluate whether they are on track to achieve the goal and make adjustments if necessary.Although the Sprint Goal is set by the Product Owner, the Scrum Team has the ability to influence it. During the Sprint Planning meeting, the team collaborates with the Product Owner to select the Product Backlog items that will be included in the Sprint. The team can provide input on the feasibility of certain items and suggest alternative solutions. This input can influence the Sprint Goal and help ensure that it is achievable within the Sprint timeframe.
To know more about Sprint visit:
brainly.com/question/14582692
#SPJ11
what is a lintel? question 7 options: upright beam beam used to span an opening a form of volcanic stone a type of marble
Answer: A lintel is a type of beam that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item
Using the Verde Valley Fire Station No. 32 plans provide, determine the quantities and costs for the following. You are required to use On-Screen Takeoff. ⢠The Built-Up Roof ⢠All 1-1/2" Rigid Insulation ⢠All R-type Batt Insulation ⢠All Cants ⢠All parapet wall cap flashing
The given paragraph explains that On-Screen Takeoff is a software program used in construction for taking measurements and performing material takeoffs from digital blueprints.
What is On-Screen Takeoff?The given task requires using On-Screen Takeoff to determine the quantities and costs for several components of the Verde Valley Fire Station No. 32 plans.
Specifically, the task involves calculating the quantities and costs for the Built-Up Roof, all 1-1/2" Rigid Insulation, all R-type Batt Insulation, all Cants, and all parapet wall cap flashing.
On-Screen Takeoff is a software program that enables construction professionals to take measurements and perform material takeoffs from digital blueprints.
Using this software, the user can measure and calculate the required quantities and costs for each component in a project, and generate detailed reports for pricing and ordering materials.
Learn more about Takeoff
brainly.com/question/13190090
#SPJ11
incorporating a nonlinear equation of state in a damage model for high velocity impact analysis of brittle materials, december 2009.
In December 2009, an approach was proposed to incorporate a nonlinear equation of state into a damage model for high-velocity impact analysis of brittle materials.
When studying the behavior of brittle materials under high-velocity impacts, it is essential to account for the nonlinearity of the material response. Traditional linear models may not accurately capture the complex behavior observed during these dynamic events.
By incorporating a nonlinear equation of state into the damage model, researchers aimed to improve the accuracy of predictions and better simulate the material's response under high-velocity impacts. The nonlinear equation of state describes the relationship between stress, strain, and other material properties, taking into account the nonlinear behavior exhibited by brittle materials.
This enhanced damage model allows for a more realistic representation of the material's response during high-velocity impacts, considering factors such as energy dissipation, fracture patterns, and failure modes. The incorporation of a nonlinear equation of state provides a more comprehensive understanding of the complex phenomena involved in the impact analysis of brittle materials, leading to improved predictions and design considerations for such scenarios.
Learn more about materials here
https://brainly.com/question/17546069
#SPJ11
what is the purpose of the coarse adjustment knob?
The purpose of the coarse adjustment knob on a microscope is to move the stage or objective lenses vertically to quickly bring the specimen into rough focus.
It is called the "coarse" adjustment knob because it provides a larger and faster movement compared to the fine adjustment knob.
When initially viewing a specimen under a microscope, the coarse adjustment knob is used to rapidly bring the specimen into approximate focus.
By turning the knob clockwise, the stage or objective lenses move upward, and by turning it counterclockwise, they move downward. This allows the user to quickly adjust the focus level to a point where the specimen becomes visible.
It is important to note that the coarse adjustment knob should only be used when the microscope is on the lowest magnification or scanning objective lens (usually 4x or 10x). Once the specimen is approximately in focus, the fine adjustment knob should be used for fine-tuning and achieving precise focus.
The coarse adjustment knob is designed for larger, rapid adjustments to avoid the risk of crashing the objective lens into the slide or damaging the specimen.
Using the coarse adjustment knob at higher magnifications or with the fine adjustment knob can lead to the objective lens hitting the slide, causing potential damage to both the lens and the specimen.
In summary, the coarse adjustment knob on a microscope is used for quick, rough adjustments of the focus to bring the specimen into approximate view. It is an essential tool for initially locating and observing specimens under low magnification.
To learn more about knob, click here:
https://brainly.com/question/30529229
#SPJ11
Which of the following would zoning ordinances not address?
how tall a skyscraper can be
how much revenue a restaurant must make
how far from a school a power plant must be
how many parking spots a mall must have
Engineers study the properties of fluids, including viscosity and compressibility, to test the efficiency of systems under given conditions. True or False?
Answer:
True.
Explanation:
The compressibility of a fluid can be defined as a measure of the change in volume (density) with respect to the amount of pressure applied to the fluid. Thus, as the pressure of a compressible fluid increases, both its viscosity and density increases.
Some examples of compressible fluids are vapors, gases, air etc.
Additionally, the compressibility of fluids plays a significant role in the field of science such as in aerodynamics, fluid mechanics, thermodynamics etc.
Viscosity can be defined as a quantity expressing the magnitude of internal friction that restricts the ease of flow between parallel layers at some distance apart having unit speed relative to each other.
These properties of fluids, including viscosity and compressibility are usually being studied by engineers such as civil engineers, in order to test the efficiency of systems under given conditions.
Answer:
true
Explanation:
edge
Data encountered in solving problems often do not fall exactly on the grid of values
provided by property tables, and linear interpolation between adjacent table entries
becomes necessary. Using the data provided by textbook property tables, estimate
(a) the specific volume at T = 240°C, p = 1.25 MPa, in m3
/kg.
(b) the temperature at p = 1.5 MPa, v = 0.1555 m3
/kg, in °C.
(c) the specific volume at T = 220°C, p = 1.4 MPa, in m3
/kg.
The specific volume at 240°C and 1.25MPa will be 0.1879m³/kg.
How to calculate the valueVolume is a measure of three-dimensional space. It is often quantified numerically using SI derived units or by various imperial or US customary units. Volume is the amount of space taken up by an object, while capacity is the measure of an object's ability to hold a substance, like a solid, a liquid or a gas.
The specific volume at 240°C and 1.25MPa will be calculated thus:
V2 =V1 + (V3 - V1) (P2 - P1)/(P3 - P1)
V2 = 0.2275 + (0.1483 - 0.2275) (1.25 - 1.0)/(1.5 - 1.0)
= 0.2275 + (-0.0792 × 1/2)
= 0.1879m³/kg.
Learn more about volume on:
brainly.com/question/463363
#SPJ1
An Otto cycle takes in air at a temperature of 20°C and a pressure of 100 kPa. The high temperature is 1000°C and the compression ratio is 8. The specific heat for air at constant pressure is 1.00 kJ/kg K, and the specific heat for air at constant volume is 0.716 kJ/kg-K. The mass of air in a cylinder is 0.002 kg. If the specific heats stay constant, the clearance volume is most nearly :________
(A) 90 cm
(B) 120 cm3
(C) 180 cm
(D) 210 cm
A company wants to develop audio speakers using an inexpensive type of plastic that has a very high quality of sound output. Which customers would most likely give a high evaluation of this product?
Answer:A
Explanation:
Those who want to save money and will use the product for only a few years
Answer:
THE ANSWER is A - those who want to save money and will use the product for only a few years
Explanation: Got it right on edg 2021
_____ can process many pieces of data at the same time and learn to recognize patterns.
Neural networks can process many pieces of data at the same time and learn to recognize patterns.
However, similar to the brain, such networks are capable of processing a variety of information concurrently, learning to spot patterns, and programming themselves to address similar issues on their own. Single instruction multiple data, or SIMD, is a type of parallel processing where a computer has two or more processors that all follow the same instruction set but handle distinct types of data. Large data sets that are based on the same predefined benchmarks are frequently analyzed using SIMD. Haptic interfaces, which are frequently used in gaming consoles, clothes, and sports training equipment, give tactile feedback by imparting vibrations or pressures to the user using actuators that are embedded in the device (for example, a cell phone).
Learn more about network here-
https://brainly.com/question/13051988
#SPJ4
According to each of the Utilitarian and Capabilities approacheswhat reasons should motivate an engineer to attend to the needs of the visually impaired?
Answer:
According to the Utilitarian approach, an engineer should attend to the needs of the visually impaired because doing so would result in the greatest overall happiness and well-being for the greatest number of people. By designing products and systems that are accessible and usable by the visually impaired, engineers can improve the quality of life for a significant portion of the population, which would result in increased happiness and well-being.
According to the Capabilities approach, an engineer should attend to the needs of the visually impaired because doing so would help to promote their capabilities and enable them to live fulfilling lives. By designing products and systems that are accessible and usable by the visually impaired, engineers can help to ensure that these individuals are not restricted in their ability to participate fully in society and to pursue their goals and aspirations. This would enable the visually impaired to develop and exercise their capabilities, which would contribute to their overall well-being and flourishing.
Explanation:
Why become an Android programmer?
A light commercial building located in Philadelphia, Pa has construction and use characteristics much like a residence and design heating load of 120,000 Btu/h and cooling of 60,000 Btu/h. Determine the following: (a) Heating energy requirement, Btu(b) Gallons of No. 2 fuel oil/year, assuming efficiency of the furnace is 75 %(c) Cubic feet of natural gas/year(d) kWh of electricity for cooling for air conditioner with SEER of 8.5 using degree day method.(6 points)
Answer:
b
Explanation:
Searches related to Probability questions - A person frequents one of the two restaurants KARIM or NAZEER, choosing Chicken's item 70% of the time and fish's item 30% of the time. Regardless of where he goes , he orders Afghani Chicken 60% of his visits. (a) The next time he goes into a restaurants, what is the probability that he goes to KARIM and orders Afghani Chicken. (b) Are the two events in part a independent? Explain. (c) If he goes into a restaurants and orders Afghani Chicken, what is the probability that he is at NAZEER. (d) What is the probability that he goes to KARIM or orders Afghani Chicken or both?
Answer:
a) 0.42
b) Independent
c) 30%
d) 0.88
Explanation:
Person chooses Chicken's item : 70% = 0.7
Person chooses fish's item : 30% = 0.3
Visits in which he orders Afghani Chicken = 60% = 0.6
a) Probability that he goes to KARIM and orders Afghani Chicken:
P = 0.7 * 0.6 = 0.42
b) Two events are said to be independent when occurrence of one event does not affect the probability of the other event's occurrence. Here the person orders Afghani Chicken regardless of where he visits so the events are independent.
c) P = 0.30 because he orders Afghani Chicken regardless of where he visits.
d) Let A be the probability that he goes to KARIM:
P(A) = 0.7 * ( 1 - 0.6 ) = 0.28
Let A be the probability that he orders Afghani Chicken:
P(B) = 0.3 * 0.6 = 0.18
Let C be the probability that he goes to KARIM and orders Afghani chicken:
= 0.7 * 0.6 = 0.42
So probability that he goes to KARIM or orders Afghani Chicken or both:
P(A) + P(B) + P(C) = 0.28 + 0.18 + 0.42 = 0.88
Which option identifies the most likely outcome in the following scenario?
Engine, Inc. conducted a life cycle assessment (LCA) on its standard automobile engine. The LCA determined
that too much heat was lost through the engine, requiring large amounts of fuel to be consumed.
The company will conduct an impact analysis.
The company will develop a biodiesel engine.
O The company will increase the scope of the study.
O The company will redesign the engine to lose less heat.
Whith regard to the life cycle assessment (LCA), the option that identifies the most likely outcome in the following scenario is: "the company will redesign the engine to lose less heat.
Why is this so?In this case, the most likely conclusion is that the manufacturer will alter the engine to waste less heat. This is because the life cycle assessment discovered that too much heat was lost via the engine, necessitating the consumption of huge amounts of gasoline.
Redesigning the engine to lose less heat might address this issue while also potentially resulting in more efficient fuel usage.
Conducting an impact analysis or broadening the scope of the study would not directly address the issue of engine heat loss, and developing a biodiesel engine would be a different approach to addressing the issue of fuel consumption rather than heat loss.
Learn more about life cycle assessment at:
https://brainly.com/question/31573010
#SPJ1
3. What is the function of valve springs in a cylinder head?
A. Close valves
B. Open valves
C. Prevent oil from entering the combustion chamber
D. Hold the valves in place
What kind of data is captured in a data warehouse?
A data warehouse is created specifically for data analytics, which includes scanning vast amounts of data to recognize patterns and relationships.
A database is used to collect and store data, including transactional information. Enterprise Data Warehouse (EDWH) is another name for Data Warehouse (DWH) (EDW). A data warehouse is a central location where information from one or more data sources is stored. Enterprise Data Warehouse (EDW), Operational Data Store (ODS), and Data Mart are the three primary types of data warehouses. A data warehouse acts as a repository for old information that may be analyzed. Data in a warehouse can be examined and evaluated using online analytical processing, or OLAP.
Learn more about data warehouse here:-
https://brainly.com/question/14615286
#SPJ4
Discuss your interpretation of the confidence-precision trade-off, and provide a few examples of how you might make a choice in one direction or the other in an engineering situation.
The given question is incomplete, the complete question is as follows:
Our text describes a trade-off that we must make as engineers between our confidence in the value of a parameter versus the precision with which we know the value of that parameter. That trade-off might be affected by whether we are looking at a two-sided or bounded (one-sided) interval.
Question: Discuss your interpretation of the confidence-precision trade-off, and provide a few examples of how you might make a choice in one direction or the other in an engineering situation.
Answer: A balancing point is required to be reached to obtain a better confidence level in the predicted values.
Explanation:
The confidence interval and precision are the two terms that aims at providing the accurate estimation of the measurability of an object. If the precision increases, we can compromise on the confidence level and if the confidence level increases, then the precision of the predicted value also dilutes.
Thus a balance point is required to be reached between these two variables so that we get better confidence in the values being predicted without losing the correct estimation on precision. Ensuring that both the confidence and precision are maintained.
The following questions are intended for the WinXP VM. Difficulty: Basic What command would you run to give you the following information? * • Time Zone Page Flle Location(s) Hotfix(s) a * I want a full working command, not just the name of a binary example "wmic"). Your answer has to actually produce the desired output
The command to obtain the Time Zone, Page File Location(s), and Hotfix(s) information on a Windows XP VM is "systeminfo".
How to obtain specific system information?The question is asking for a command that can be run in a Windows XP virtual machine to obtain information about the Time Zone, Page File location(s), and any installed Hotfixes. The command should produce the desired output, not just the name of the binary that can be used.
One possible command that can be used is "systeminfo". This command provides detailed configuration information about the computer and its operating system, including the Time Zone, Page File location(s), and a list of installed Hotfixes. To run the command, open the command prompt by clicking Start > Run and typing "cmd" in the Run box. Then, type "systeminfo" in the command prompt and press Enter. The command will produce a long list of information about the system, including the desired information about the Time Zone, Page File location(s), and installed Hotfixes.
Learn more about command
brainly.com/question/31910745
#SPJ11
A horizontal poly crystalline solar panel module has to be investigated by natural cooling. For crystal silicon, the thermal coefficient approximately 0.0045/K is used. Investigate the effect of air velocity on the cooling performance of PV panels at 0-5 m/s air velocities, 25-40 ºC ambient temperatures, and 400-1000 W/ m2 solar radiation
Solution :
It is given that :
Thermal coefficient = 0.0045/K
Ambient temperature, \($T_a = 25 - 40^\circ$\)
air velocity, v = 0-5 m/s
Solar radiation, \($G= 400-100 \ W/m^2$\)
\($P=50 \ W$\)
Model calculations :
Cell temperature (\($T_c$\))
\($T_c = T_a + \left(\frac{0.25}{5.7+3.8 \ v_w}\right) G$\)
where \($ v_w - v_a = $\) wind speed / air speed
∴ \($T_c = 2 \pi + \left(\frac{0.25}{5.7+3.8 \times 1}\right) \times 400$\)
\($T_c = 35.526 ^\circ$\)
\($\Delta T = T_c -25$\)
= 35.526 - 25
= 10.526 K
Thermal coefficient = 0.0045 x 10.526
= 0.04737
Pv power = \($(1 -C_T) \times P \times \frac{G}{1000}$\)
\($=(1 -0.04737) \times 50 \times \frac{400}{1000}$\)
= 17.0526 W