The process that the public uses to log/register complaints begins with the loading of the complaint on the Online Portal or Mobile App. All loaded complaints will be in the ComplaintLoaded state. Complaints can either be accepted (through the acceptance option) or rejected (through the reject option). All accepted complaints will be in the ComplaintsAccepted state and rejected complaints will be in the Complaints Rejected State. For both Accepted and Rejected Complaint, there is a send notification option that sends notifications out. The process ends with Notification Sent state for all the notifications that are sent out. The Online Portal or Mobile App has a mechanism to check the details of the complaint before accepting or rejecting.
Q.3.1 Analyse the process used to log/register complaints and create a state machine diagram.
Q.3.2 Create an activity diagram for the same log/register complaints process in Q.3.1. above.

The correct subnet mask for a network that will use 20 hosts on each subnet while borrowing the fewest bits and wasting the fewest host addresses is 255.255.255.240.

To determine the correct subnet mask, we need to find the minimum number of bits required to accommodate 20 hosts per subnet while minimizing wastage. Since we need 20 host addresses, the closest power of 2 greater than 20 is 32 (2^5). This means we need at least 5 bits to represent the host addresses. However, we must also consider the network and broadcast addresses, which cannot be assigned to hosts. The network address is the first address in the subnet, and the broadcast address is the last address. Therefore, we have two addresses that cannot be used for hosts.

Using the formula 2^n - 2, where n is the number of borrowed bits, we can calculate the number of usable host addresses. In this case, 2^5 - 2 = 30, which is greater than the required 20 hosts. The subnet mask is represented in binary form as 11111111.11111111.11111111.11110000, which translates to 255.255.255.240 in decimal notation. This subnet mask provides 16 address spaces per subnet, with 14 usable host addresses, while wasting the fewest host addresses and borrowing the fewest bits.

Learn more about host addresses here-

https://brainly.com/question/32090631

#SPJ11

Excel's text formatting style is applied to the selected cell or cells when you underline cell content. To highlight or call attention to certain content inside a cell, underline it.

A cell is a rectangular box used to store data in a spreadsheet or table. It is the fundamental component of a spreadsheet and is used to arrange, work with, and examine data. The unique column letter and row number assigned to each cell in a spreadsheet can be used to refer to that cell in formulas and calculations. To make cells more aesthetically pleasing or to draw attention to certain data, multiple colour schemes, font styles, border designs, and alignment options can be applied. They may also include text, numbers, calculations, photos, charts, and other sorts of data.

Learn more about A cell here:

https://brainly.com/question/1675645

#SPJ4

A transaction may terminate by committing its changes, rolling back and undoing its modifications, or being interrupted by the RDBMS (database management system) and withdrawn.

A transaction in a database management system (DBMS) can terminate its operation in different ways, including committing, rolling back, stopping without committing, or being interrupted by the RDBMS and withdrawn.

1. Commit: When a transaction completes successfully and reaches a consistent and desired state, it can choose to commit its changes. The commit operation makes all the modifications permanent, ensuring their persistence in the database. Once committed, the changes become visible to other transactions.

2. Rollback: If a transaction encounters an error or fails to complete its intended operation, it can initiate a rollback. The rollback operation undoes all the changes made by the transaction, reverting the database to its state before the transaction began. This ensures data integrity and consistency by discarding the incomplete or erroneous changes.

3. Stopping without committing or withdrawing: A transaction may terminate without explicitly committing or rolling back its changes. In such cases, the transaction is considered incomplete, and its modifications remain in a pending state. The DBMS typically handles these cases by automatically rolling back the transaction or allowing the transaction to be resumed or explicitly rolled back in future interactions.

4. Interrupted by the RDBMS and withdrawn: In some situations, the RDBMS may interrupt a transaction due to external factors such as system failures, resource conflicts, or time-outs. When interrupted, the transaction is withdrawn, and its changes are discarded. The interrupted transaction can be retried or reinitiated later if necessary.

The different termination options for a transaction allow for flexibility and maintain data integrity. Committing ensures the permanence of changes, rollback enables error recovery, stopping without committing leaves the transaction open for future actions, and being interrupted by the RDBMS protects against system or resource-related issues.

Transaction termination strategies are crucial in ensuring the reliability and consistency of the database system.

Learn more about database:

https://brainly.com/question/24027204

#SPJ11

Explanation:

B. Bach

Thanks for your point

Answer:

Log inSign up

Server Unit 5 Quiz

STUDY

Flashcards

Learn

Write

Spell

Test

Play

Match

You don't have policies that force settings for the look of users' computer desktops. Each user's chosen desktop settings are applied from his or her roaming profile to any computer he or she signs in to. You think it's important for users to have this choice, but you'd like a consistent look for computers used for product demonstrations to customers. What's the best way to do this without affecting users when they sign in to other computers?

Tap card to see the definition

Configure loopback policy processing in Computer Configuration. Configure the desktop settings in User Configuration and link the GPO to the OU containing the demonstration computers.

Tap again to see the term

You want to create policies in a new GPO that affect only computers with Windows 8 installed. You don't want to reorganize your computer accounts to do this, and you want computers that are upgraded to Windows 10 to fall out of the GPO's scope automatically. What can you do?

Tap card to see the definition

Configure a WMI filter on the GPO that specifies Windows 8 as the OS. Link the GPO to the domain.

Tap again to see the term

1/20

Created by

Bannieboy

Tags related to this set

IT Essentials: PC Hardware And Software

Marketing

Right Click

Inheritance

Terms in this set (20)

You don't have policies that force settings for the look of users' computer desktops. Each user's chosen desktop settings are applied from his or her roaming profile to any computer he or she signs in to. You think it's important for users to have this choice, but you'd like a consistent look for computers used for product demonstrations to customers. What's the best way to do this without affecting users when they sign in to other computers?

Configure loopback policy processing in Computer Configuration. Configure the desktop settings in User Configuration and link the GPO to the OU containing the demonstration computers.

You want to create policies in a new GPO that affect only computers with Windows 8 installed. You don't want to reorganize your computer accounts to do this, and you want computers that are upgraded to Windows 10 to fall out of the GPO's scope automatically. What can you do?

Configure a WMI filter on the GPO that specifies Windows 8 as the OS. Link the GPO to the domain.

You have just finished configuring a GPO that modifies several settings on computers in the Operations OU and linked the GPO to the OU. You right-click the Operations OU and click Group Policy Update. You check on a few computers in the Operations department and find that the policies haven't been applied. On one computer, you run gpupdate and find that the policies are applied correctly. What's a likely reason the policies weren't applied to all computers when you tried to update them remotely?

You need to configure the firewall on the computers.

No computers in an OU seem to be getting computer policies from the GPO linked to the OU, but users in the OU are getting user policies from this GPO. Which of the following are possible reasons that computer policies in the GPO aren't affecting the computers? (Choose all that apply.)

-The Computer Configuration settings are disabled.

-The computer accounts have Deny Read permission.

An administrator would like to configure a computer to load policy information that is stored locally to speed system start-up. What client-side feature should the administrator select?

Group Policy caching

A junior administrator deleted a GPO accidentally, but you had backed it up. What should you do to restore the deleted GPO?

Right-click the Group Policy Objects folder and click Manage Backups.

You want to create an HTML report that shows which policies and GPOs are applied to a particular user and computer. Which command should you use?

gpresult

Users who log on from a branch office connected to the DC via a slow WAN link are complaining of slow logon times when you assign applications via group policies. What can you do to speed their logons?

Configure asynchronous processing when a slow link is detected

The comparison of the Future Business Leaders of America (FBLA) and the Business Professionals of America (BPA) is given below:

The FBLA chapter is known to be one that functions by helping  high school students to be able to prepare for any kind of careers in business via the use of academic competitions (FBLA Competitive Events), leadership development, and any other forms of educational programs..

While the Business process automation (BPA) is known to be a body that is said to act as the automation of any form of complex business processes and functions and it is one that works beyond conventional data alterations and record-keeping activities.

Learn more about Business from

https://brainly.com/question/24553900

#SPJ1

The compile-time errors is known to be an error that is said to refers to the errors that matches to the semantics or syntax.

The  A runtime error is seen as the error that people are known to encounter when the code execution is said to be taking place during runtime.

A logic error is known to be a kind of an error or a 'bug' / mistake that is said to be seen in a program's source code that brings about incorrect or unexpected kind of behavior.

The example is  that Runtime errors in course of the execution of the program while Logic errors brings about  incorrect results.

Hence, The compile-time errors is known to be an error that is said to refers to the errors that matches to the semantics or syntax.

Learn more about compile-time errors from

https://brainly.com/question/27296136

#SPJ1

ZIF socket: A special socket for inserting and securing a processor.

A ZIF (zero insertion force) socket is a special type of socket that is used to hold a processor in place on a computer motherboard. The socket is designed to make it easy to insert and remove the processor without applying too much force or causing damage. The socket typically features a lever or handle that can be used to lock the processor in place and a set of pins that make contact with the processor's pins. ZIF sockets are commonly used in desktop and laptop computers, as well as in some servers and other types of computer equipment.

Learn more about socket here: brainly.com/question/5160310

#SPJ4

In the United States, the number of tiers of Internet service providers (ISPs) can vary, but commonly there are four tiers of ISPs. These tiers represent the hierarchical structure of ISPs and their role in connecting customer networks to the Internet.

The Internet infrastructure consists of multiple layers or tiers of ISPs, each with its own specific function and level of connectivity. The number of tiers can vary depending on the specific context and region. However, in the United States, the commonly recognized model includes four tiers of ISPs.

The first tier, known as Tier 1 ISPs, are the backbone providers that have a global network and peer directly with other Tier 1 ISPs. They have extensive network infrastructure and handle a significant amount of Internet traffic. Tier 1 ISPs do not pay for transit services.

The second tier, known as Tier 2 ISPs, connects to Tier 1 ISPs and may also peer with other Tier 2 ISPs. They have regional or national networks and may pay for transit services from Tier 1 ISPs to reach certain destinations on the Internet.

The third tier, known as Tier 3 ISPs, are typically regional or local ISPs that connect to Tier 2 ISPs to gain access to the wider Internet. They serve a smaller customer base and may purchase transit services from Tier 2 ISPs.

Finally, the fourth tier consists of Internet service providers that serve end-users, such as residential and small business customers. These ISPs connect to Tier 3 ISPs or may purchase wholesale Internet services from higher-tier ISPs.

While there may be additional subdivisions and variations within each tier, the four-tier model is commonly used to understand the hierarchical structure of ISPs in the United States. It represents the interconnected network of ISPs that enable the connection of customer networks to the global Internet.

Learn more about the Internet here:- brainly.com/question/16721461

#SPJ11

Implementing IoT on farms offers numerous advantages, including precise farming with real-time monitoring, efficient livestock management, etc.

It can also help with automation of tasks, remote monitoring capabilities, data-driven decision making, cost savings through optimized resource usage, predictive analytics for proactive measures, and supply chain optimization.

These benefits lead to enhanced productivity, improved farm operations, reduced losses, and increased profitability, making IoT a valuable technology for modern agricultural practices.

Learn  more about lot at:

https://brainly.com/question/19995128

#SPJ4

Acronyms such as IP, FTP, HTTP, and HTTPS are examples of network protocols. A network protocol is a set of rules and conventions that govern how data is transmitted over a network or the internet.

Here are brief explanations of the protocols mentioned in the question:

- IP (Internet Protocol): This is a fundamental network protocol that provides the routing and addressing information necessary for data to be transmitted across a network. It defines how data packets are addressed and routed to their destination.

- FTP (File Transfer Protocol): This protocol is used for transferring files over the internet. It provides a simple and secure way to transfer large files between computers, typically using a client-server architecture.

- HTTP (Hypertext Transfer Protocol): This protocol is used for transferring web pages over the internet. It defines how web browsers and servers communicate with each other to exchange data.

- HTTPS (Hypertext Transfer Protocol Secure): This is a secure version of HTTP that uses encryption to protect sensitive data transmitted over the internet, such as passwords, credit card numbers, and other personal information.

Know more about the network protocols.

https://brainly.com/question/14672166

#SPJ11

Answer:

PII

Explanation:

The information in the email violates the PII. That is Personally identifiable information. PII, are nothing but any data that could potentially be used to identify a person. Examples of which can be  a full name, Social Security number, driver's license number, bank account number, passport number, and email address, etc.

A circular queue is a data structure that follows a circular pattern, where the elements are stored in a circular manner.

In this data structure, insertions are made at the rear end of the queue, and deletions are made at the front end of the queue. The circular nature allows efficient utilization of memory and enables continuous use of the available space. By using this approach, the queue can wrap around and start filling up from the beginning once it reaches the end, creating a circular pattern. This allows for efficient management of elements and ensures that both ends of the queue are utilized effectively.

Learn more about circular here;

https://brainly.com/question/15414071

#SPJ11

Answer:

hi

Explanation:

Answer:

1/6 because there is one shaded and the total are 6

Answer:

b location based services

Explanation:

:)

Answer:

The correct answer is 100% D. Online Forums

Explanation:

*edit

I accidentally just gave myself 1 star lol, but I promise it is the right answer.

A module consists of related program code organized into small units that are easy to understand and maintain.

It is a separate software component, which is designed to perform a single task within an application. They are written to allow the reuse of code in different parts of a program or across different programs. Module also helps in the organization of code, making it easier to understand, debug, test, and maintain.

Modules provide a way for developers to break down an application into smaller, more manageable pieces. The code within each module can be reused and shared across different parts of the application or different applications entirely. This reuse and sharing of code help save development time and effort.

Modules can be implemented in many programming languages, including Python, Java, C, C++, and more. In Python, modules are implemented using .py files. They can be imported into other Python scripts and provide a way to modularize a Python application.

In conclusion, modules are a critical component of software development. They provide a way to break down an application into smaller, more manageable pieces of code, and help in the reuse and sharing of code across different parts of an application or different applications entirely.

Learn more about Modules here,the module definition comprises the module header and the module ________.

https://brainly.com/question/30187599

#SPJ11

A  frequency distribution's cumulative frequency is the sum of all individual frequencies up until a predetermined class interval. The cumulative frequency is the running total of all frequencies, from the first frequency to the last frequency.

The frequency that is acquired in this method is known as the cumulative frequency in statistics. The frequency of the first interval is multiplied by the frequency of the second, and this sum is multiplied by the frequency of the third, and so on.

Cumulative frequency comes in two varieties: lesser than type and larger than type. The number of observations in a given data collection that fall above (or below) a specific frequency is calculated using cumulative frequency.

Learn more about cumulative frequency, visit:

https://brainly.com/question/30087370

#SPJ4

If a network covers several buildings or cities, it is called WAN. WAN stands for Wide Area Network. WANs are used to connect local area networks (LANs) together, allowing for communication and data transfer between different locations. So option d is the correct answer.

WAN  is a type of computer network that spans a large geographical area, such as multiple buildings, cities, states, or even countries.

WANs often utilize public or private telecommunications infrastructure, such as leased lines, satellites, or internet connections, to establish connectivity across the wide area.

Examples of WAN technologies include MPLS (Multiprotocol Label Switching), Ethernet WAN, and virtual private networks (VPNs). So the correct answer is option d. WAN.

To learn more about network: https://brainly.com/question/1167985

#SPJ11

To fix this problem, edit the JDBC connection for profiling and update the following parameters within the connection to include the correct S3 path, such as:

JDBC:awsathena://AwsRegion=<region>;S3OutputLocation=s3://<bucketname>

An application programming interface (API) called Java Database Connectivity (JDBC) for the Java programming language specifies how a client can access a database. For connecting Java databases, it is a Java-based data access solution. It comes from Oracle Corporation and is a component of the Java Standard Edition platform. It offers ways to search for and change data in a database and is focused on relational databases. Connections to any ODBC-accessible data source are possible in the Java virtual machine (JVM) host environment thanks to a JDBC-to-ODBC bridge.

Multiple implementations may exist and be utilized by the same application thanks to JDBC (Java Database Connectivity). The API offers a method for dynamically loading the appropriate Java packages and adding them to the JDBC Driver Manager's database.

Learn more about JDBC here:

https://brainly.com/question/14114506

#SPJ4

In Excel, create a spreadsheet with columns for projects, initial costs, and cash inflows. Use the SUM function to calculate net cash flows for each project in specific years.

1. Open Microsoft   Excel and create a new spreadsheet.

2. In column A, enter the headings   "Project" and list the projects as "X" and "Y" in thesubsequent cells.

3. In column B, enter the heading "Initial Cost" and enter the values $19,800 and $40,700 in   the corresponding cells.

4. In column Center   the heading "Cash Inflows" and enter the values $0, $0, $25,000 for Project X and $12,000, $25,000,$10,000 for Project Y.

5. To calculate the net   cash flow for each project in a specific year, you can use the SUM function. For example,in cell D2, you can enter the formula "=SUM(C2:C3)" to   calculate the net cash flow for Project X in Year 3.

6. Repeat the SUM functionfor the remaining years and projects to calculate their respective net cash flows.

Learn more about Excel at:

https://brainly.com/question/29985287

#SPJ4

Answer:

Tone

Explanation:

This is the right answer for connexus

Answer:

2

Explanation:

2 is the zero-based index of 3.5 in the array. (I.e., the first element has index 0)

The next line has >>> aList = [9, 2, 3.5, 7] >>> aList.index(3.5) is 2.

Array is defined as a collection of identical pieces or data items kept in close proximity to one another in memory. An ordered group of items of a single data type makes up an array type, a user-defined data type. Ordinary array types employ the ordinal position as the array index and have a specified upper limit on the amount of elements they can contain.

As a result, we can see that the simple array contains an unordered list. By using the command "aList. sort()", we can turn the unordered list into an ordered one, which gives us [2, 3.5, 7, 9] in ascending order. In the array, 3.5 is located at index 2 (zero-based). (The first element, thus, has index 0)

Thus, the next line has >>> aList = [9, 2, 3.5, 7] >>> aList.index(3.5) is 2.

To learn more about array, refer to the link below:

https://brainly.com/question/14915529

#SPJ5

You're declaring variable finger inside your while loop so it only exists inside your while loop. You're then trying to use your finger variable outside your while loop, which is impossible because finger only exists inside your while loop.

Try declaring total at the beginning of your program, adding finger to total before you break from your while loop and then adding randNum to your total at the end.

To better understand why you can't use finger outside your while loop, look up "java scope". This will explain why you can only use variable in the regions they're declared in.

Answer:

1. The attribute that information gain would choose as the tree's root is Sound. This is because the information gain of Sound is 0.75, which is higher than the information gain of Fur (0.5) and Color (0.25).

2. The decision tree that would be constructed by recursively applying information gain to select roots of sub-trees is as follows:

```

Root: Sound

   * Meow: Cat

   * Bark:

       * Fine: Dog

       * Coarse: Dog

```

3. The new example [Sound=Bark, Fur=Coarse, Color=Brown] would be classified as Dog. This is because the decision tree shows that all dogs bark and all dogs with coarse fur are dogs.

Here is a more detailed explanation of how the decision tree is constructed:

1. The first step is to calculate the information gain of each attribute. The information gain of an attribute is a measure of how much information about the class is contained in that attribute. The higher the information gain, the more valuable the point is for classification.

2. The attribute with the highest information gain is chosen as the tree's root. In this case, the attribute with the highest information gain is Sound.

3. The data is then partitioned into two groups based on the value of the root attribute. In this case, the data is partitioned into two groups: dogs and cats.

4. The process is then repeated recursively for each group. In this case, the process is repeated for the dogs and the cats.

5. The process continues until all of the data has been classified.

The decision tree is a powerful tool for classification. It can be used to classify data that is not linearly separable. In this case, the data is not linearly separable because there are dogs that bark and cats that meow. However, the decision tree can classify the data correctly using the information gained from each attribute.

Answer:

se ve muy dificil amiga

Explanation:

Answer:

Primary is firsthand, secondary is viewed through articles and other materials.

Explanation:

EX: Primary account of a story, secondary view through pictures.

Answer:

The valid IPv6 addresses are:

343f:1eee:acdd:2034:1ff3:5012

6384:1319:7700:7631:446a:5511:8940:2552

The other options are not valid IPv6 addresses:

127.0.0.1 is an IPv4 address

192.168.2.15 is an IPv4 address

141:0:0:0:15:0:0:1 is a valid IPv6 address, but it can be simplified to 141::15:0:0:1

165.15.78.53.100.1 is not a valid IPv6 address because it has more than 8 groups of hexadecimal digits.

Explanation:

As per the details given, 343f:1eee:acdd:2034:1ff3:5012, and 141:0:0:0:15:0:0:1 are valid IPv6 addresses.

The first address, which uses hexadecimal numbers separated by colons, is a legitimate illustration of an IPv6 address.

The second address is likewise a valid IPv6 address, allowing for the omission of leading zeros and the compression of successive zeros using double colons (::).

The two IPv6 addresses that can be used are 141:0:0:0:15:0:0:1 and 343f:1eee:acdd:2034:1ff3:5012.

The hexadecimal numbers used to represent IPv6 addresses are separated by colons.

For a more streamlined representation, leading zeros can be deleted and successive zeros can be compressed using double colons (::).

Thus, 343f:1eee:acdd:2034:1ff3:5012, and 141:0:0:0:15:0:0:1 are valid IPv6 addresses.

For more details regarding IPv6 addresses, visit:

https://brainly.com/question/32156813

#SPJ6