What are the three actions when out-of-profile packets are
received in DiffServ? How do these actions affect the
out-of-profile packets accordingly?

Answers

Answer 1

The three actions when out-of-profile packets are receive in Differentiated Services (DiffServ) are marking, shaping, and dropping.

Marking: Out-of-profile packets can be marked with a specific Differentiated Services Code Point (DSCP) value. This allows routers and network devices to prioritize or handle these packets differently based on their marked value. The marking can indicate a lower priority or a different treatment for these packets.Shaping: Out-of-profile packets can be shaped to conform to the allowed traffic profile. Shaping delays the transmission of these packets to match the specified rate or traffic parameters. This helps in controlling the flow of traffic and ensuring that the network resources are utilized efficiently.Dropping: Out-of-profile packets can be dropped or discarded when the network is congested or when the packet violates the defined traffic profile. Dropping these packets prevents them from consuming excessive network resources and ensures that in-profile packets receive better quality of service.

To know more about receive click the link below:

brainly.com/question/31951934

#SPJ11


Related Questions

____________ is the organization that oversees environmental compliance.

Answers

Answer:

Environmental Protection Agency (EPA)

Explanation:

Pollution can be defined as the physical degradation or contamination of the environment through an emission of harmful, poisonous and toxic chemical substances.

Environmental Protection Agency (EPA) is the organization that oversees environmental compliance.

In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act.

Hence, the Environmental Protection Agency (EPA) is the governmental agency set up to ensure that various industries, factories and people comply with laws and regulations concerning the environment.

Answer:

EPA

Explanation:

using credit reduces future income

Answers

Answer:

lol

Explanation:r

The following is a series of questions pertaining to the NSPE Code of Ethics. Please indicate whether the statement are true or false. These questions are provided by the NSPE.

Engineers in public service as members, advisors or employees of a governmental or quasi-governmental body or department may participate in decisions with respect to services solicited or provided by them or their organizations in private or public engineering practice as long as such decisions do not involve technical engineering matters for which they do not posses professional competence

Answers

Geomorphic

Explanation:

Because it's pretty easy if you think of the right ways of geomorphic ways to process the equation

what do you think of web 3.0? do you think it will be realized someday in the future?​

Answers

Answer:

is this a question for hoework

engineers incorporate green design to increase sustainability and reduce the effect of products on both natural resources and people. true true false false

Answers

The given statement: "Engineers incorporate green design to increase sustainability and reduce the effect of products on both natural resources and people" is True.

What is green design?

Green design is also known as environmentally sustainable design or sustainable design. It is the method of designing physical objects, structures, services, and systems to comply with the principles of ecological sustainability.

The green design process involves incorporating eco-friendly features into designs, such as increasing energy efficiency, reducing pollution, and developing environmentally sustainable products and practices.

Importance of green design: Green design, which focuses on resource efficiency and ecological conservation, has become an important factor in architectural and engineering projects.

Engineers have begun to focus more on green design in recent years in order to increase sustainability and reduce the impact of goods on both natural resources and people.

In addition, green design techniques are used to increase a structure's efficiency and lower operating expenses.

The given statement: "Engineers incorporate green design to increase sustainability and reduce the effect of products on both natural resources and people" is True.

Read more about Engineers at https://brainly.com/question/33162700

#SPJ11

what instrument is used to measure the diameters of teflon and steel spheres and what is its bias error?

Answers

To measure the diameters of teflon and steel spheres, a micrometer is typically used.

The bias errors for the micrometer are fixed, systematic errors that are assumed to be zero.

This means that the errors are caused by the instrument itself, rather than from random fluctuations of the measured value. These errors can be caused by a variety of factors, such as misaligned parts, inaccurate measurements, and incorrect calibration.

In order to identify and correct these errors, it is important to understand the source of the errors. The most common sources of bias errors are the instruments themselves, as they may contain inaccurate scales, or may not be properly calibrated.

Learn more about micrometer:

https://brainly.com/question/17229300

#SPJ4

Help, quick please. I need help with my engineering word problem

Help, quick please. I need help with my engineering word problem

Answers

Answer:

a

Explanation:

The answer is The first one A

A new car design must carry a family of four, include safety features, get more than 25 miles per gallon on the highway, and weigh less than 1.5 tons. which is one of the criteria that should be part of the design to meet the proposal request?

Answers

Answer: weigh less than 1.5 tons

Explanation:

Answer:The answer is A, seats for five people.

Explanation: I took the test and it is the only option that fits the criteria listed above.

. the life of a bearing supporting a rotating shaft is expressed in number of revolutions. compute the life of a bearing that rotates 1750 rpm continuously for 24 h/day for five years.

Answers

To compute the life of a bearing, we need to consider the number of revolutions it makes. Given that the bearing rotates at 1750 rpm continuously for 24 hours a day, we can calculate the number of revolutions in a day.

Number of revolutions in a day = rpm * 60 minutes * 24 hours
Number of revolutions in a day = 1750 * 60 * 24 = 2,520,000 revolutions

Next, we need to calculate the number of revolutions in five years, taking into account leap years.

Number of revolutions in five years = number of revolutions in a day * 365 days * 5 years
Number of revolutions in five years = 2,520,000 * 365 * 5 = 4,608,000,000 revolutions

Therefore, the life of the bearing that rotates at 1750 rpm continuously for 24 hours a day for five years is approximately 4,608,000,000 revolutions.

To know more about consider visit

https://brainly.com/question/33431497

#SPJ11

determine the operating point of a universal transistor dc bias circuit when vcc = 15 v, r1 = 10 k, r2 = 2.2 k, rc = 680 , and re = 100 . assume β = 200 and vbe = 0.72 v.

Answers

The operating point of the universal transistor DC bias circuit with the given parameters is approximately: IC ≈ 5.21mA, IB ≈ 26μA, and VRC ≈ 3.54V.

The operating point of a universal transistor DC bias circuit can be determined by calculating the base current (IB), collector current (IC), and the voltage drop across the collector resistor (RC). In this case, with VCC = 15V, R1 = 10kΩ, R2 = 2.2kΩ, RC = 680Ω, RE = 100Ω, β = 200, and VBE = 0.72V, we can proceed with the calculations.
The main answer: The operating point of the universal transistor DC bias circuit, with the given parameters, is as follows: IC ≈ 5.21mA, IB ≈ 26μA, and VRC ≈ 3.54V.
Now let's explain the calculations in more detail:
To determine the base current (IB), we can use Ohm's Law: IB = (VCC - VBE) / (R1 + [(β + 1) * R2]). Substituting the given values, we find IB ≈ (15 - 0.72) / (10000 + [(200 + 1) * 2200]) ≈ 26μA.
The collector current (IC) is approximately equal to β times IB. Therefore, IC ≈ β * IB ≈ 200 * 26μA ≈ 5.2mA.
To calculate the voltage drop across the collector resistor (RC), we use Ohm's Law: VRC = IC * RC. Substituting the values, we get VRC ≈ 5.2mA * 680Ω ≈ 3.54V.
Therefore, the operating point of the universal transistor DC bias circuit with the given parameters is approximately: IC ≈ 5.21mA, IB ≈ 26μA, and VRC ≈ 3.54V.

To learn more about universal transistor
https://brainly.com/question/28630529
#SPJ11

2. A silo (base not included) is to be constructed in the form of a cylinder surmounted by a hemisphere. The cost of construction per square unit

of surface area is twice as great for the for the hemisphere as it is for the cylindrical side wall. Determine the dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum. Neglect the thickness of the silo and waste in construction.​

Answers

An extremum is a point where the function has its highest or lowest value, and at which the slope is zero.

The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum is as follows;

Height of cylinder = 2 × Radius of cylinder

Reason:

The given parameters are;

Form of silo = Cylinder surmounted by a hemisphere

Cost of construction of hemisphere per square unit = 2 × The cost of of construction of the cylindrical side wall

Required:

The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum

Solution:

The fixed volume of the silo, V, can be expressed as follows;

\(V = \pi \cdot r^2 \cdot h + \dfrac{2}{3} \cdot \pi \cdot r^3\)

\(h = \dfrac{V - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 }\)

Where;

h = The height of the cylinder

r = The radius of the cylinder

The surface area is, Surface Area = 2·π·r·h + 2·π·r²

The cost, C = 2·π·r·h + 2×2·π·r² = 2·π·r·h + 4·π·r²

Therefore;

\(C = 2 \times \pi \times r\times \dfrac{V - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } + 4 \cdot \pi \cdot r^2 = \dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r}\)

\(C = \dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r}\)

At the minimum value, we have;

\(\dfrac{dC}{dr} =0 = \dfrac{d}{dr} \left(\dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r} \right) = \dfrac{16 \cdot r^3 \cdot \pi - 6 \cdot V}{3 \cdot r^2}\)

Which gives;

16·π·r³ = 6·V

\(V = \dfrac{16 \cdot \pi \cdot r^3}{6} = \dfrac{8 \cdot \pi \cdot r^3}{3}\)

Which gives;

\(h = \dfrac{\dfrac{8 \cdot \pi \cdot r^3}{3} - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } = 2 \cdot r\)

h = 2·r

The height of the silo, h = 2 × The radius, 2

Therefore, the dimensions to be used if the volume is fixed and the cost is to be kept to a minimum is, height, h = 2 times the radius

Learn more about extremum point here:

https://brainly.com/question/2869450

the project operator always produces as output a table with the same number of rows as the input table.

Answers

The statement that the project operator always produces an output table with the same number of rows as the input table is incorrect. The project operator, also known as the SELECT operator in relational databases, is used to retrieve specific columns or attributes from a table based on specified conditions.

When the project operator is applied, the resulting table will have the same number of columns as the input table, but the number of rows can be different. This is because the operator filters the rows based on the specified conditions, and only the selected rows meeting the criteria will be included in the output table.

In other words, the project operator allows you to choose a subset of columns from the original table, but it does not necessarily retain all the rows. The output table will contain only the rows that satisfy the conditions specified in the query.

Learn more about table:

https://brainly.com/question/11881205

#SPJ11

In an industrial process, the diameter of a ball bearing is an important measurement. The buyer sets specifications for the diameter to be 3.0 ± 0.01 cm. The implication is that no part falling outside these specifications will be accepted. It is known that in the process the diameter of a ball bearing has a normal distribution with mean μ = 3.0 and standard deviation σ = 0.005. On average, how many manufactured ball bearings will be scrapped?

Answers

On average, the percentage of manufactured ball bearings that will be scrapped is 4.56%.

What is the manufactured ball bearings about?

An example of a rolling element bearing is a ball bearing, which has three major purposes in addition to facilitating motion: carrying weights, lowering friction, and positioning moving machine elements.

Note that:

x1 = 3-0.01 = 2.99

x2 = 3+0.01 = 3.01

So, It can be scrapped by:

1−P(2.99 < Z <3.01)= 1−P (2.99 −3/ 0.005 < Z < 2.99+30.00/5)

=1−P(2.99 − 3/0.005 <  Z <2.99 + 3/0.005)= 1 − P ( −2 < Z <2)

=1−(P (Z < 2.0) − (P (Z> − 2.0)) = ( P (Z > 2.0) + P( Z < −2.0)=

2 x 0.0228 = 0.0456

Therefore, the Answer will be 4.56% of the manufactured ball bearings need to be scrapped.

Learn more about ball bearings from

https://brainly.com/question/24316492
#SPJ1

A cylindrical tank is required to contain a gage pressure 670 kPakPa . The tank is to be made of A516 grade 60 steel with a maximum allowable normal stress of 150 MPaMPa . If the inner diameter of the tank is 2 mm , what is the minimum thickness, tt, of the wall

Answers

Answer:

The minimum thickness t of the wall is 0.00446 mm

Explanation:

Solution

Given that

Pressure =670kPa = 0.670

σ allowable normal stress = 150 MPa

Inner diameter = 2mm

Steel = A516 grade 60

Now,

Since the hoop stress is twice the longitudinal stress, the cylindrical tank is more likely to fail from the hoop stress.

Thus

σ allowable = σₙ = pμ/t

=p (d/2)

150 MPa =0.670MPa * 2/2/t

=0.67/t

t=0.67/150

t =0.00446 mm

A circular hoop sits in a stream of water, oriented perpendicular to the current. If the area of the hoop is doubled, the flux (volume of water per unit time) through it:___________

Answers

Answer:

The flux (volume of water per unit time) through the hoop will also double.

Explanation:

The flux = volume of water per unit time = flow rate of water through the hoop.

The Flow rate of water through the hoop is proportional to the area of the hoop, and the velocity of the water through the hoop.

This means that

Flow rate = AV

where A is the area of the hoop

V is the velocity of the water through the hoop

This flow rate = volume of water per unit time = Δv/Δt =Q

From all the above statements, we can say

Q = AV

From the equation, if we double the area, and the velocity of the stream of water through the hoop does not change, then, the volume of water per unit time will also double or we can say increases by a factor of 2

please hurry i’ll give you 15 points

please hurry ill give you 15 points

Answers

Answer:

measures, dissolves, liquid, carbon dioxide, evaporates, water vapor, mold, decompose

what is rfid attendance system

Answers

An RFID-based attendance system makes use of RFID technology to mark student's attendance before every lecture in the institute. The students have to use an RFID tag to mark their presence on the RFID reader. The data is stored in the attendance system with high accuracy and efficiency.

relationship between civil engineering and geology​

Answers

Answer:

Geological and civil engineers sometimes work together, but have very different responsibilities. While geological engineers study the earth's inner and outer surface to evaluate potential mining and infrastructure construction sites, civil engineers design the infrastructure to be built.

Help me for this question

Help me for this question

Answers

The answer we’ll be 375

Starting the vehicle's engine and listening to its operation can
indicate a host of problems, from loose belts to worn main
bearings. True or false

Answers

I pretty sure it’s true because you can start your car and it sounds different that probably means something is wrong

How do I complete a database Part 1?

Answers

Ragman assigns the mission "Database - Part 1" in Escape From Tarkov. You are asked to get the cargo manifests for Goshan, OLI, and IDEA from Interchange. Contents. Database for Escape from Tarkov: Part 1 Quest Information.

How do I complete a database Part 1?

You can keep information on a certain topic in an organized way using a database. It's fantastic when you need to keep a computer system's worth of searchable data or information. Many systems in use today employ databases.

A database is used to store user information on nearly all popular websites with a large user base and almost every online store that sells things. Most databases comprise one or more tables, each of which may have a number of unique fields.

To know more about Database, visit:

https://brainly.com/question/518894

#SPJ4

Who is responsible for providing working conditions which are free from fall dangers?

Answers

Answer:

I am pretty confident it is the Employer!

Explanation:

They have the responsibility to provide a safe workplace that is free from serious hazards, according to the General Duty Clause of the OSH Act (OSHA Standards)

I hope this helped you!! :D

Answer:

Employers

Explanation:

OSHA requires employers to: Provide working conditions that are free of known dangers. Keep floors in work areas in a clean and, so far as possible, a dry condition. Select and provide required personal protective equipment at no cost to workers.

public void readSurvivabilityByAge (int numberOfLines) {// WRITE YOUR CODE HERE}/** 1) Initialize the instance variable survivabilityByCause with a new survivabilityByCause object.** 2) Reads from the command line file to populate the object. Use StdIn.readInt() to read an* integer and StdIn.readDouble() to read a double.** File Format: Cause YearsPostTransplant Rate* Each line refers to one survivability rate by cause.**/

Answers

The method public void readSurvivabilityByAge(int numberOfLines) is used to read a file from the command line and populate the survivabilityByCause object. The first step is to initialize the instance variable survivabilityByCause with a new survivabilityByCause object. This is achieved by writing survivabilityByCause survivability = new survivabilityByCause();

Next, we can use a for loop to read through each line of the file until we reach the desired number of lines (numberOfLines). Within the for loop, we can use StdIn.readInt() to read an integer and StdIn.readDouble() to read a double for each line of the file. The file format includes three columns: Cause, YearsPostTransplant, and Rate. Each line refers to one survivability rate by cause. Therefore, we need to define variables for each column to store the values as we read through the file. For example, we can define variables like int cause, int yearsPostTransplant, and double rate to store the values from each line.

Within the for loop, we can use these variables to populate the survivabilityByCause object. For example, we can use the method survivability.addSurvivabilityByCause(cause, yearsPostTransplant, rate) to add each line of data to the object. Overall, the code for this method should include initializing the object, reading the file with a for loop, defining variables for each column, and using those variables to populate the survivabilityByCause object.

Learn more about loop here-

https://brainly.com/question/30706582

#SPJ11

Difference between rock and minerals

Answers

Answer:

a rock is made up of two or more minerals but a mineral is a natural substance with chemical and physical properties

Which of the following describes what engineers do to ensure the safety of a location before a building is constructed?

Responses

They test the soil where the foundation of the building will be located.

They remove the soil where the foundation of the building will be located.

They hire geologists to remove the soil in the area where the building will be located.

They hire analysts to test the soil in the area where the building will be located.

Answers

Answer: They test the soil where the foundation of the building will be located.

I’m pretty sure

The two structural members, one of which is in tension and the other in compression, exert the indicated forces on joint o. determine the magnitude r of the resultant r of the two forces and the angle θ which r makes with the positive x axis (measured counterclockwise from the x axis).

Answers

X axis is y axis and x
We're going to remedy it with the parallelogram law.
\alpha = one hundred eighty - 30 - 70 = eighty degrees
R = sqrt(2^2 + 3^2 - 2(2)(three) cos(80)
R = three.30 kN, we can conclude now that the value of the ensuing of R is 3.30 kN

sin \beta /3 = sin(eighty)/three.304 = 63.4 stages

3.3 kN
180 + 33.4 = 213.4 degrees
63.4 - 30 = 33.4

What does efficiency measure?

Answers

Answer:

Efficiency is defined as any performance that uses the fewest number of inputs to produce the greatest number of outputs. Simply put, you're efficient if you get more out of less.

Explanation:

According to the video, which abilities and skills do Human Resources Managers need to have? Check all that apply.
math skills
in-depth knowledge of the company's product
sensitivity to other people's needs
speaking skills
writing skills

Answers

Answer:

C, D, E

Explanation:

just did it on edge 2020

Answer:

c

d

e

Explanation:

edgunity 2020

How much power appears in one sideband of an AM signal of a 5-kW transmitter modulated by 80 percent?

Answers

Answer:

The modulation index is m = 0.8. We will now substitute m=0.8, Pc = 124 W to find P. Therefore, the power in one of the sidebands in SSB SC modulation is 79.36 W. the correct option is (C).

Hope you had got your answer

Mark me as brainliest


Multiple Choice
The first step in product analysis is to disassemble a product.
True
False

Answers

True??? I think if not search it up and quizlet thing will pop up and tell you the answer

Answer:

the answer is false

Explanation:

i took the advice of the other person and found a Quizlet that said false :)

i hope this helps :D

Other Questions
What are the plotting points? What territories did the United States gain control over as a result of the Spanish-American War? a. Guam, the Philippines, Cuba, Puerto Rico b. Spain, Cuba, Hawaii, Panamac. Colombia, Panama, Cuba, the Philippines d. Cuba, Spain, Hawaii , Alaska what are some similarities between the western Europe cultures? Use the normal distribution of SAT critical reading scores for which the mean is 515 and the standard deviation is 125. Assume the variable x is normally distributed. What percent of the SAT verbal scores are less than 675? If 1000 SAT verbal scores are randomly selected, about how many would you expect to be greater than 550? what directly results from disaggregation of an aggregate plan? Differentiatef(x) = 3/x + 3 sec(x) + 2 cot(x)with respect xdf/dx = Bob paid $ 9.90 for a box of crayons. How much did each crayon cost? gibb's defense behavior of taking neither side in a conflict is called? A 10 kg ball is released from the top of a hill. How fastis the ball going when it reaches the base of the hill?Approximate g as 10 m/s2 and round the answer to thenearest tenth.m/shy = 2 mh = 0.5 m What is taking information from an authorized source of classification guidance and re wording it in a new or different document? You have 10 grades in your math class. After ordering them from least to greatest, this is the data set: {80, 82, 82, 83, 85, 88, 92, 95, 95, 96}. Which statement is true about the mode?The mode is 95.The mode is 82.There are two modes: 82 and 95.There is no mode name all five necessary mechanisms used in tcp to implement reliable communication over an unreliable channel. although important, do not list congestion control or flow control. 2) What is a THEME for this story?A) Having fun is more important than winning.B)When someone does better than you, practice moreso you can beat them.was theC) Never settle for second place.thoughd theD)If someone is better than you at something, youshould just quit.sooned. Carina Convert then type in exactly the binary value 1110 0011 into hexadecimal. Find the range, mean, median, and mode of the following data set. 4, 24, 9, 19, 23, 21, 9, 20 a. Range 20 Mean 15.1 Median 20 Mode 9 c. Range 20 Mean 16.1 Median 19.5 Mode 9 b. Range 22 Mean 15.1 Median 20 Mode 4 d. Range 20 Mean 16.1 Median 20 Mode 19 !!!!!!!!!! PLEASE HELP IM SO FRUSTRATEDCAN SOMEONE EXPLAIN HOW I DO THESE PROBLEMS? IM SO CONFUSED AND I HAVE A LOT TO DO PLEASE !!!!!!!1. What two directions could point B be located related to point A? Write two equations to represent the possible locations of point B or in other words, how did you travel to point B. Make a conclusion about the sums in relation to the integers in the equations on the next slide.2. Explain How you could use absolute value to show that -4+3 and 3+(-4) have the same value. Which property of addition states that these sums are equivalent?3. You know that the sum of -5 and another integer is a positive integer. What an you conclude about the sign of the other integer? What can you conclude about the value of the other integer?Explain.4. Jim is standing beside a pool. He drips a weight from 4 feet above the surface of the water in the pool. The weight travels a total distance of 12 feet down before landing on the bottom of the pool. Explain how you can write a sum of integers to find the depth of A chef uses the expression 0. 3n to represent the pounds of beef to use in a soup recipe for n people. The soup also has7 fewer pounds of carrots than beef,twice as many pounds of potatoes as beef, andhalf as many pounds of onions as carrots. How many pounds of ingredients will the chef use to make soup for 40 people?Enter your answer in the box HELP MEE PLZ IT'S IN MUSICS HELP ME MEEEEEE!!!! What personal skills (like patience, perseverance, or humility) does a musician need in order to master the basics of music? How could these skills be used in other areas of life? For an arc lengths, area of sector A and central angle of a circle of radius , find the indicated quantity for the given value A 611 m?r=611 m, 0: radian (Do not round until the final answer. Then found to three decimal places as needed) dr. mcfadden wants to determine the impact of petting on dog behavior. he proposes having his psychology students walking dogs from the local animal shelter. one group of students will pet the dogs while walking them. the other group of students will withhold physical contact with the dogs while walking them. after 3 weeks of training, the dogs will be evaluated to see which group of dogs exhibits more positive walking behaviors, based on a checklist developed by dog trainers. what will an ethics review committee likely decide about this study?