when solving a problem using the rayleigh-rtiz method, what are the requirements for the basis function>

The time required to raise water level by 6 inches in a 600 acres reservoir is 30 hours.

First, we need to calculate the volume of water required to raise the water level by 6 inches in a 600-acre reservoir.

The volume of water required = area x height

= (600 acres x 43,560 sq ft/acre) x (6 inches / 12 inches/ft)

= 1,299,600 cubic feet

Next, we need to calculate the flow rate in cubic feet per hour, as the units of volume and time need to be consistent.

12 cusecs = 12 cubic feet per second

= 12 x 60 x 60 = 43,200 cubic feet per hour

Finally, we can calculate the time required to raise the water level by 6 inches.

Time = Volume / Flow rate

= 1,299,600 cubic feet / 43,200 cubic feet per hour

= 30 hours (approximately)

Therefore, it would take approximately 30 hours for a flow of 12 cusecs to raise the water level by 6 inches in a 600-acre reservoir.

Learn more about Fluid mechanics at:

https://brainly.com/question/14468759

#SPJ11

Graphic designers and UI/UX designers are more likely to work for Jasmine. A member of her team.

The building and maintenance of websites require a variety of skills and disciplines known as web design. Among the many components of web design are search engine optimization, user interface design (UI design), authorship, which includes standardized code and custom software, and web graphic design. Even while some designers manage every step of the design process, it is typical for many people to collaborate in teams to handle different areas. Web design is sometimes used to describe the process of designing a website's front-end (client side) design, which involves authoring HTML. Web design and web engineering partially overlap within the broader context of web development.

Learn more about Web design here:

https://brainly.com/question/15420719

#SPJ4

The variable that is used for flow control services is Buffer window .

For output in a console window, a screen buffer is a two-dimensional array of character and colour data. There may be several screen buffers on a console. The screen buffer that is visible is the current screen buffer. Every time a new console is created, the system builds a screen buffer.

A memory area known as a buffer is used to store data momentarily while it is being transferred from one location to another. When transferring data between computer processes, a buffer is employed. The vast majority of buffers are used in software.

To learn more about Buffer window refer to :

https://brainly.com/question/9906723

#SPJ1

The power exerted by the dominant group over minority groups through institutions, such as mass media and popular culture, in order to communicate and reinforce ruling values and beliefs that may be adopted by members of the minority group is referred to as hegemony.

The term "hegemony" best describes the concept described in the question. Hegemony refers to the social, cultural, and ideological influence wielded by the dominant group over subordinate groups within a society. It involves the imposition of dominant norms, values, and beliefs that shape the worldview and behavior of both the dominant and subordinate groups.

In this context, institutions like mass media and popular culture play a significant role in disseminating and reinforcing the ideologies and narratives of the dominant group. By controlling the representation, portrayal, and dissemination of information, the dominant group can shape public opinion and maintain their position of power and control.

However, it is important to note that while hegemony influences the beliefs and behaviors of some members of the minority group, it does not encompass all forms of discrimination, racism, or oppression. These terms represent specific manifestations of power imbalances and discriminatory practices, which can be reinforced by hegemonic systems but are not limited to them.

Learn more about  hegemony here :

https://brainly.com/question/31452683

#SPJ11

Answer:

It takes a single interface and creates multiple virtual interfaces with different MAC addresses. Essentially, it enables the creation of independent logical devices over a single ethernet device – “many to one” relationship in contrast to a “one to many” relationship where you map a single NIC to multiple networks.

Explanation:

I hope this helps (sorry if im wrong, this is all i could find)

Chinook winds occur when warm, dry wind flows down a slope, whereas katabatic winds occur when cold, dense air flows down a slope.

Chinook winds, sometimes known as 'Chinooks,' are two types of predominantly warm, mainly westerly winds in western North America: coastal Chinooks and inland Chinooks. The coastal Chinooks are rainy, southwesterly winds that come in from the ocean on a seasonal basis.

On the other hand, a katabatic wind is a draining wind, which transports high-density air from a higher height down a slope using gravity. Such winds are sometimes known as autumn winds; the term catabatic winds is often used.

Learn more about Chinook Winds:
https://brainly.com/question/28326073
#SPJ1

The GIS operation that refers to the area of spatial proximity around a point is called:

b. Buffer.

GIS stands for Geographic Information System. It is a system designed to catch, store, manipulate, analyze, manage, and exhibit all kinds of spatial or geographical data. GIS is an effective method for analyzing and interpreting spatial data, which comprises data linked to location or geographic coordinates. GIS involves an arrangement of spatial and statistical methods for analyzing and displaying geographical data.

There are different GIS operations like clip, select by location, buffer, etc. Among these operations, buffer operation is used to make an area of spatial proximity around a point. Buffering allows for areas of spatial proximity to be outlined around geographic features. The term "proximity" refers to the distance around the original geographic feature that falls within a specific range of distance from that feature. The answer is b. Buffer.

To know more about GIS, visit the link : https://brainly.com/question/30528975

#SPJ11

To calculate the smallest final diameter of a 60-mm diameter rod in an ideal drawing process, we will use the following steps:

1. Identify the initial diameter: The initial diameter of the rod is 60 mm.

2. Identify the drawing process terms: We are asked to calculate the smallest final diameter in an ideal drawing process.

3. Apply the ideal drawing process assumption: In an ideal drawing process, there is no limit to the amount of reduction that can be achieved. Therefore, the smallest final diameter can theoretically be reduced to an infinitesimally small value.

In conclusion, assuming an ideal drawing process, the smallest final diameter to which a 60-mm diameter rod can be drawn is theoretically infinitesimally small. However, in real-world applications, there will be practical limitations and material properties that would prevent such extreme reductions.

To know more about ideal drawing process

https://brainly.com/question/31579049?

#SPJ11

To calculate the current drawn from the mains, the rated slip and overturn slip, the active, reactive, and apparent powers drawn from the network, and the rotor emf frequency values when the motor is operating at rated load, we can follow these steps.

In order to calculate the current drawn from the mains, we need to use the power equation for three-phase motors. This equation takes into account the power, voltage, and power factor to determine the current. Next, to calculate the rated slip, we need to use the formula that relates the synchronous speed, rated speed, and slip. The synchronous speed is given as 1440 1/min, and the rated speed is obtained by multiplying the synchronous speed by the efficiency factor (n = 89%). Plugging in the values, we can find the rated speed. The slip is then calculated by subtracting the rated speed from the synchronous speed and dividing by the synchronous speed.

Please note that we couldn't calculate the overturn slip as the given information (2432 N.M) does not directly relate to slip. If you could provide more information or clarify this, I would be happy to help you further.

To know more about network visit:

https://brainly.com/question/32294456

#SPJ11

The given statement "You use the CARS checklist to determine whether a website is current, appealing, relevant, and sophisticated" is true because it is a mnemonic that stands for Credibility, Accuracy, Reasonableness, and Support.

It aids the reader in determining whether the information is reliable, appropriate, and useful.

Credibility: Can the information be trusted?

Accuracy: Is the information presented true and correct? Are the data and facts verifiable? Is there a balanced perspective presented?

Reasonableness: Is the information presented reasonably? Are any claims made reasonable, considering what is known in the field?

Support: Are references and citations used? Are additional sources or supporting data provided?These four criteria, when applied consistently and appropriately, can help the reader or researcher determine whether the information presented is credible, accurate, reasonable, and well-supported.

For such more question on mnemonic:

https://brainly.com/question/28172263

#SPJ11

9514 1404 393

Answer:

  1

Explanation:

Only one such circle can be drawn. The diameter of the 10" circle will be a radius of the semicircle. In order for the 10" circle to be wholly contained, the flat side of the semicircle must be tangent to the 10" circle. There is only one position in the figure where that can happen. (see attached).

Answer:

Answer:

I don't understand the question

Answer: hello your question is incomplete attached below is the complete question

answer : Ac = 5° , A\(_{f}\) = 2.5°

Explanation:

Bandgap energy for material A = 0.90 eV

Bandgap energy for material B = 1.10 eV

Calculate the ratio of ni for Material B to Material B

Total derivation ( d ) = d1 + d2

 d = A\(_{c}\) ( μ\(_{c}\) - 1 ) + A\(_{f}\) ( μ\(_{f}\) - 1 )  ---- ( 1 )

where : d = 1° , μ\(_{c}\) = 1.5 , μ\(_{f}\) = 1.6

Input values into equation 1 above

1° = 0.5Ac + 0.6Af  ---- ( 2 )

also d = d1 [ 1 - w/ w1 ] ------ ( 3 )

∴ d = Ac ( μ\(_{c}\) - 1 ) ( 1 - w/w1 )

  1° = Ac ( 1.5 - 1 ) ( 1 - 0.06/0.1 ) --- ( 4 )

resolving  equation ( 4 )

Ac = 5°

resolving equation ( 2 )

A\(_{f}\) = 2.5°

In the radio communication system, multipath is the propagation phenomenon that causes diffusion or reflection in multiple different directions of a signal.

Multipath is a propagation mechanism that impacts the propagation of signals in radio communication. Multipath results in the transmission of data to the receiving antenna by two or more paths. Diffusion and reflection are the causes that create multiple paths for the signal to be delivered.

Diffraction occurs when a signal bends around sharp corners; while reflection occurs when a signal impinges on a smooth object. When a signal is received through more than one path because of the diffraction or reflection, it creates phase shifting and interference of the signal.

You can learn more about signal propagation at

https://brainly.com/question/14452898

#SPJ4

A contractor has a job that should be completed in 100 days. At present, he has 80 men on the job and it is estimated that they will finish the work in 130 days. Of the 80 men, 50 are each paid ₱120.00 a day, 25 at ₱180.00 a day, and 5 at ₱250.00 a day. For each day beyond the original 100 days, a contractor has to pay ₱500.00.

liquidated damages.(a) How many more men should the contractor add so that he would complete the work on time?In the first case, we see that the contractor already has 80 men and they are working for 130 days to complete the job. So, we can use the following formula to determine the additional number of workers required to finish the work in 100 days.

b) If of the additional men, 2 are paid ₱180.00 a day, and the rest at ₱120.00 a day, would the contractor save money by employing more men and not paying the fine Let’s assume that the contractor adds 440 workers, of which 2 are paid ₱180.00 a day and the rest are paid ₱120.00 a day.

The total cost of the new workers is, therefore, ₱9600.00 + ₱4500.00 + ₱49800.00 = ₱63,900.00.The cost of liquidated damages would be calculated as follows:  $$LD = (130-100) \cdot 500 = ₱15,000.00$$.

Therefore, the contractor would save money if he employs more men and not pays the fine. The contractor’s savings would be:$$Savings = LD - Additional cost$$$$= 15000.00 - 63900.00 $$$$= -48900.00$$

Thus, we can see that the contractor would save ₱48,900.00 by employing more men and not paying the fine.

To know more about contractor visit:

https://brainly.com/question/31457618

#SPJ11

Answer: A leak in the system

Explanation:

Answer:

please give me brainlist and follow

Explanation:

Mild steel can be converted into high carbons steel by which of the following heat treatment process? Explanation: Case hardening, also referred as carburizing increases carbon content of steel, thus, imparting hardness to steel.

Answer: Can't help

Explanation:

Answer:

10 cents/kwh

Explanation:

Base monthly charge = $10.00

First 100 kwh at $0.16/kwh = $16.00

Next 200 kwh at $0.10/kwh = $20.00

Remaining 400 kwh at $0.06/kwh = $24.00

Total charge = $10 + $16 + $20 + $24 /(100+200+400)

Average cost = $70/700 or 10 cents/kwh

Using the Inverse Square Law, the SPL at 150 ft under hard surface condition is 58.57 dB, at 500 ft under soft surface condition is 61.98 dB, and at 1500 ft under soft surface condition is 51.02 dB.

Given:

Distance of the highway (r) = 250 ft

Sound Pressure Level (SPL) at distance r (L1) = 64 dB

Sound Pressure Level follows the Inverse Square Law. According to this law, the SPL decreases by 6 dB when the distance is doubled, and it increases by 6 dB when the distance is halved.

Mathematically, it can be written as,L1/L2 = (r2/r1)² Where,

Substituting the given values and solving, we get the following:

For A) 150 ft under hard surface condition: L2 = L1 - 20 log(r2/r1) dB where

For B) 500 ft under soft surface condition: L2 = L1 - 20 log(r2/r1) dB where

For c) 1500 ft under soft surface condition: L2 = L1 - 20 log(r2/r1) dB where

Hence, the SPL at distances 150 ft under hard surface condition, 500 ft under soft surface condition, and 1500 ft under soft surface condition are 58.57 dB, 61.98 dB, and 51.02 dB, respectively.

Learn more about Inverse Square Law: brainly.com/question/30404562

#SPJ11

Answer:

The scale factor is used to make models of real-life objects. For example, a toy car is modeled to look just like a real car but at a smaller size. The ratio of the toy car to the real car might be 1:24 1: 24 . Which means that for every one unit of length on the toy car, the real thing is 24 times that size.

Explanation:

The received power if the effective aperture area of the receiving antenna is 20 m2 is 177.77 m2.

In physics, power is referred to as the rate of energy conversion or transfer over time. The unit of power in the SI system, often known as the International System of Units, is the Watt (W). A single joule per second is one watt.

Power was formerly referred to as activity in some research. A scalar quantity is power. As power is always a function of labor done, it follows that if a person's output varies during the day depending on the time of day, so will his power.

A measure of the pace at which energy is transferred, power is a physical quantity. As a result, it can be described as the pace of job completion relative to time.

Therefore, The received power if the effective aperture area of the receiving antenna is 20 m2 is 177.77 m2.

To learn more about Power, refer to the link:

https://brainly.com/question/29575208

#SPJ2

Answer:

true

Explanation:

Answer:

I got the point

Explanation:

just chill out baby

The smallest diameter of the gear shaft, with a permitted shear stress of 14 ksi, is 1.18 inches, and it can transmit 3 horsepower at 150 rev/min.

A mechanical device called a gear motor consists of an electric motor and a gearbox with numerous gears within. In order to complete a task at a specific speed, the motor's gearbox must reduce its speed and raise its torque.

We must apply the equation for a shaft's power transmission:

P = 2πNT/60

To solve for T, we can rearrange the equations as follows:

T = 60P/2πN

Inputting the values provided yields:

T = (60 x 3 hp) / (2π x 150 rev/min)

T = 2.84 lb-ft

The following calculation must be used to determine a shaft's maximum shear stress:

τmax = 16T/πd³

To find d, we can rearrange this formula as follows:

d = (16T/πτallow\(\mathrm )^{1/3\)

Inputting the values provided yields:

d = (16 x 2.84 lb-ft / π x 14 ksi\(\mathrm )^{1/3\)

d = 1.18 inches.

To know more about gear visit:-

brainly.com/question/29993224

#SPJ1

Answer:

Mechanic: a person who repairs and maintains machinery

Mechanical engineers: design power-producing machines

Explanation:

Assuming fully developed flow for the water, the required tube length per pass. is, L = 9.608 m.

A system for transferring heat from a source to a working fluid is called a heat exchanger. Processes for cooling and heating both use heat exchangers. It is possible for the fluids to be in direct contact or separated from one another by a solid wall to prevent mixing.

They are extensively utilised in power plants, petrochemical plants, sewage treatment facilities, sewage treatment facilities, space heating, refrigeration, air conditioning, chemical plants, chemical petrochemical plants, and chemical plants.

An internal combustion engine serves as the archetypal example of a heat exchanger because air is forced past radiator coils while an engine coolant circulates through them, cooling the coolant and heating the incoming air.

Learn more about heat exchanger

https://brainly.com/question/17029788

#SPJ4

Actions violated:

Actions to be taken:

Edit: Use these to write your paragraph.