which command should be used on a cisco router or switch to allow log messages to be displayed on remotely connected sessions using telnet or ssh?

In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

The diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm

≈ 1696.62mm.

Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.

Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

Learn more about locus on

https://brainly.com/question/13941750

#SPJ1

Answer:

The wall of an impact socket is around 50% thicker than that of a regular socket, making it suitable for use with pneumatic impact tools, whereas regular sockets should only be used on hand tools.

Explanation:

This allows the socket to remain securely attached to the impact wrench anvil, even under high stress situations.

Answer:

The information he needs next is;

B. Volume of paint needed per unit area

Explanation:

The operation Andy wants to perform = To apply paint on the walls of the house

The information Andy knows = The area of all walls in the house

The total volume of paint needed = The total area of the walls × The volume of paint needed for each unit area

Therefore, the information required is the volume of paint needed per unit area.

Answer: Day and night are equal in length

Explanation:

took the test i got it correct

Answer:

A moving inclined plane is called a wedge.

Explanation:

The biggest reasons the U.S. hasn't adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products.

Answer:

Magnesium should be welded at a slow speed bcoz it reacts easily

Answer:

lOUIS

Explanation:

Answer:

3' 8"?

Explanation:

Answer:

what's the options

Explanation:

a butterfly isn't dangerous

State : Michigan

The most common jobs in an area or state can be influenced by a variety of factors, such as the local economy, population size, industry trends, and education levels.

The top three jobs in a downtown area of Michigan (Waiters, Waitresses and Retail salesperson

The most common jobs in an area or state can be influenced by a variety of factors, such as the local economy, population size, industry trends, and education levels. In the case of Michigan, the top three jobs in the state (Retail salesperson, Material movers and Cashiers) are all related to retail and logistics industries. Michigan is home to a number of large retail and automotive companies, which may explain why these types of jobs are common.

In the case of Michigan, the state is known for its strong manufacturing and automotive industries. These industries employ a significant portion of the workforce in the state, and many of the jobs in these industries require skills such as logistics, materials handling, and retail sales. As a result, jobs such as Retail salesperson, Material movers, and Cashiers are among the most common in the state.

For example, if the area is known for tourism or has a high concentration of restaurants and shops, it would make sense for these types of service jobs to be common.

Therefore, the most common jobs in an area or state may be influenced by a variety of factors, and may or may not directly correlate with the goods and services the state is known for.

Learn more about jobs from

https://brainly.com/question/25454905

#SPJ1



See text below

0. For the state drop down, select your state. For the Area urop down, select the mist option for "[Your State] (statewide)."

7. What were the top three jobs in your state at the time this data was reported? How do they compare to the most common jobs in the country?

The top three jobs were Retail salesperson, Material movers and Cashiers.

8. Let's now see what the data is for your specific area within your state. Select the area that is closest to you in the Area drop down at the top of the chart, keeping the state the same.

9. What were the top three jobs in your area at the time this data was reported? How do they compare to the most common jobs in the state?

Waiters Waitresses and retail salesperson were the top 3 jobs near my area.

10. Why do you think these are the most common jobs in your area and state? Do they correlate with goods/services your state is known for?

Answer:

Hope this helped ^^

Explanation:

To find the resultant velocity of the ship, we can use vector addition by considering the ship's velocity in still water and the velocity of the current separately.

Let's denote the ship's velocity in still water as Vship = 10 m/s, and the velocity of the current as Vcurrent = 2 m/s.

To find the resultant velocity, we can break down the ship's velocity and the current's velocity into their horizontal (East/West) and vertical (North/South) components.

The horizontal component of the ship's velocity (Vship_h) can be calculated using the cosine rule:

Vship_h = Vship * cos(30°)

Vship_h = 10 * cos(30°) = 10 * (√3 / 2) ≈ 8.7 m/s

The vertical component of the ship's velocity (Vship_v) can be calculated using the sine rule:

Vship_v = Vship * sin(30°)

Vship_v = 10 * sin(30°) = 10 * (1 / 2) = 5 m/s

Now, since the current is flowing towards the direction SE (southeast), which is 45° from the East direction, we can break down the current's velocity into its horizontal and vertical components.

The horizontal component of the current's velocity (Vcurrent_h) can be calculated using the cosine rule:

Vcurrent_h = Vcurrent * cos(45°)

Vcurrent_h = 2 * cos(45°) = 2 * (√2 / 2) = √2 m/s

The vertical component of the current's velocity (Vcurrent_v) can be calculated using the sine rule:

Vcurrent_v = Vcurrent * sin(45°)

Vcurrent_v = 2 * sin(45°) = 2 * (√2 / 2) = √2 m/s

Now, we can find the resultant horizontal velocity (Vresultant_h) by adding the horizontal components of the ship's velocity and the current's velocity:

Vresultant_h = Vship_h + Vcurrent_h

Vresultant_h = 8.7 + √2 ≈ 10.1 m/s

Similarly, we can find the resultant vertical velocity (Vresultant_v) by adding the vertical components of the ship's velocity and the current's velocity:

Vresultant_v = Vship_v + Vcurrent_v

Vresultant_v = 5 + √2 ≈ 6.4 m/s

Finally, we can calculate the magnitude of the resultant velocity (Vresultant) using the Pythagorean theorem:

Vresultant = √(Vresultant_h² + Vresultant_v²)

Vresultant = √(10.1² + 6.4²) ≈ 11.9 m/s

The bearing of the resultant velocity can be calculated using the inverse tangent (tan⁻¹) of the vertical component divided by the horizontal component:

Bearing = tan⁻¹(Vresultant_v / Vresultant_h)

Bearing = tan⁻¹(6.4 / 10.1) ≈ 33.7°

Therefore, the resultant velocity of the ship, in terms of its speed and bearing, is approximately 11.9 m/s at a bearing of 33.7°.

Developments in Chemistry brought innovative synthetic materials including plastics, fabrics, and fiberglass resins.

Synthetic materials are man-made materials created through chemical processes. They are used in a variety of applications, from clothing to construction and automobile manufacturing. Synthetic materials are usually derived from petroleum but can also be created from other sources such as plants. Some of the most common synthetic materials include polyester, acrylic, nylon, and vinyl. These materials are often used due to their durability, low cost, and wide range of applications. Synthetic materials are also renowned for their ability to be manipulated and tailored to suit specific needs. For example, polyester can be made waterproof which makes it ideal for outdoor apparel. Synthetic materials are also resistant to staining and fading, which can make them a great choice for furniture and upholstery.

To learn more about synthetic

https://brainly.com/question/17888065

#SPJ1

Answer: True

Explanation:

Circuit breakers are used to stop the current by using heat to detect if it has a critically large current. Defoggers use heat to stop condensation on the windows.

Answer:

A piston aids in the transformation of heat energy into mechanical work and vice versa.

Library materials that have been digitally preserved and made available online, through databases, e-books, e-journals, and other electronic media, are known as electronic resources.

Electronic resources reduce information overload and address storage issues. Sources from print are being digitalized. For the academic community, electronic information sources are becoming more and more crucial. The development of technology has prompted libraries to expand their holdings.

E-resources for teacher education are typically divided into two categories: (1) online resources, and (2) offline materials. The following are examples of online e-resources: e-books, e-journals, e-mail, e-library, e-forum, e-learning (lessons/courses), e-shops, e-dictionaries.

To know more about databasess visit:-

https://brainly.com/question/13499332

#SPJ1

The device used to position a concave part on a plane iron is usually a grinder, that's option C.

A grinder is a electricity device geared up with abrasive wheels or belts that rotate at excessive speeds. It is normally used for shaping, sprucing, and grinding numerous materials. To positioned a concave edge on a plane iron, the grinder can be used to carefully get rid of material from the brink of the iron, growing a concave or curved shape.

Option A, an oilstone, is a sprucing stone commonly used for honing and polishing blades. Option B, a whetstone, is any other form of sharpening stone used for sprucing cutting gear. These options aren't specially designed to place a concave side on a aircraft iron.

Option D, a wire side, refers to a condition that could arise during sharpening while a first-rate, brief burr of metal is fashioned on the edge of the device. While it's miles a byproduct of sprucing, it is not a device itself.

Therefore, the most suitable tool for putting a concave aspect on a aircraft iron is a grinder.

Read more about grinder at :

https://brainly.com/question/30638293

Answer:

so you can do this to avoid paying but you can just try to rest set your phone it sound crazy like you will loose all your contacts but you wont just re- set it. i mean u can try it other wise i dont know :)

Explanation:

Answer:

You can try pluging your phone into your computor and backing up your data onto itunes and factory resetting it then install your data back and see if that works.

Explanation:

Answer: 16 squared + 63 squared = x squared

Explanation:

Hi, since we have a right triangle we have to apply the Pythagorean Theorem:  

c^2 = a^2 + b^2  

Where c is the hypotenuse of the triangle (the longest side) and a and b are the other sides.  

Replacing with the values given:  

x^2 = 63^2 + 16^2  

So, the correct option is  

16 squared + 63 squared = x squared

Feel free to ask for more if needed or if you did not understand something.  

Answer:

D. 16 squared + 63 squared = x squared

Explanation:

yo

The sudden reduction in engine noise that passengers may notice after takeoff is a normal part of the takeoff process and is done to make the flight more efficient and comfortable.

The sudden reduction in engine noise or thrust that passengers sometimes hear and feel shortly after takeoff is due to a reduction in engine power as the airplane reaches a certain altitude and speed. This is a normal part of the takeoff process and is known as the "reduction in takeoff thrust" or "thrust reduction".

During takeoff, the aircraft's engines produce a high amount of thrust to get the airplane off the ground and up to a safe altitude. Once the airplane reaches a certain altitude and speed, the pilot reduces the engine power to a lower setting, which is more efficient and produces less noise. The reduction in power is often noticeable to passengers, as the noise and vibration from the engines decrease.

The exact timing of the thrust reduction can vary depending on the airplane type, airline procedures, and other factors. In some cases, the thrust reduction may occur shortly after takeoff, while in other cases, it may occur a few minutes later.

Learn more about airplanes here:

https://brainly.com/question/26868878

#SPJ1

Answer:

638.75

Explanation:

this is gonna be your answer

Answer:

A. Oxygen

Explanation:

Oxyfuel gas welding is a process that joins the metals by combustion of a fuel gas, oxygen, and air mixed in a nozzle and directed at a work surface

Answer:

Engineering is the use of science and math to design or make things. People who do engineering are called engineers. They learn engineering at a college or university. Engineers usually design or build things. Some engineers also use their skills to solve technical problems.

Explanation:

To code a hobby gearshift motor to run at a speed of 50 using an Arduino Uno R3, you can use pulse-width modulation (PWM) to control the motor speed.

General outline of the steps involved are:

1)Connect the hobby gearshift motor to the Arduino Uno. Ensure that you have the necessary motor driver or H-bridge circuit to interface the motor with the Arduino.

2)Set up the Arduino Uno by installing the Arduino IDE and connecting it to your computer.

3)Open the Arduino IDE and create a new sketch. Define the necessary pin for controlling the motor speed using PWM.

For example, you can use Pin 9 for this purpose:

const int motorSpeedPin = 9;

4)In the setup() function, configure the motor speed pin as an output:

void setup()

{

 pinMode(motorSpeedPin, OUTPUT);

}

5)In the loop() function, use the analogWrite() function to set the desired speed for the motor.

Since the analogWrite() function uses PWM, the speed can be adjusted by varying the duty cycle from 0 to 255.

A duty cycle of 255 corresponds to the maximum speed. To achieve a speed of 50, you can use a duty cycle of approximately 128:

void loop()

{

 analogWrite(motorSpeedPin, 128);

}

6)Upload the code to the Arduino Uno and observe the motor running at the desired speed.

For more questions on motor

https://brainly.com/question/28852537

#SPJ8

Answer:

The outer tube of the pump is drawn with solid lines because it represents the visible edges of the object, which are the most important and prominent features of the drawing. Solid lines are used to indicate visible edges, while other types of lines such as dashed or dotted lines are used for hidden or construction lines that are not meant to be seen in the final drawing.

Explanation:

When drawing an object, it's important to distinguish between the visible edges and the hidden or construction lines. The visible edges are the lines that represent the outer contour or silhouette of the object, which define its shape and form. In the case of the bicycle pump, the outer tube is the most prominent and recognizable feature of the pump, so it's drawn with solid lines to emphasize its importance and to make it stand out from the other parts of the pump.

On the other hand, the hidden or construction lines are used to guide the drawing process, to show the internal structure or components of the object, or to indicate the position of other features that are not visible from the current viewpoint. These lines are usually drawn with dashed or dotted lines to distinguish them from the visible edges and to avoid confusion.

By using different types of lines, the artist can create a clear and accurate representation of the object, with all the relevant information conveyed in a concise and understandable way. This is especially important in technical or scientific drawings, where precision and clarity are essential for conveying complex ideas or designs.

1. The advantages of saving for short, medium and long term goals are when you are diligent in saving, living with a calm mind, stable income, and having savings early on to support life when needed. Because we don't know how long we will continue to get consistent income from work, if we don't start saving early.

2. The purpose of saving for large purchases is that saving also makes it easier to make big purchases in the future, such as buying a motorbike, car or house. By saving, purchasing goods in large quantities will feel easier and less burdensome.

3. As a result, if we don't save for large purchases, we can use primary funds for large purchases, so that it will greatly interfere with fulfilling our needs.

4. Challenges that might prevent someone from saving for a big purchase:

The main problem preventing people from starting to save is not that they don't know where to find the money to save. However, because of the mindset about money.

Mentally, they see no benefit in finding the money from changing current expenses.

There are several benefits of saving, namely:

1. Learn to value money

When we save, we will know how difficult it is to collect and earn money. Thus, we will learn to think about how to best use this money according to needs, not just wants.

2. Learn Discipline

The habit of saving is able to train us to be disciplined in managing finances because when we start saving, there must be pocket money that must be set aside.

3. Learn to Live Frugal

Saving is able to train us to distinguish between wants and needs, so that we don't easily use money for things that are not important.

4. Practicing Independence

By saving, we will learn to fulfill our needs and desires through our own efforts without having to ask or whine to have their wishes fulfilled.

5. Learn to Manage Finances

From saving, besides being able to tell what our needs and desires are, we can also make money management for our daily needs, such as how much money to eat, how much pocket money and so on.

Learn more about saving at

https://brainly.com/question/10749354

#SPJ1

The FBI stands for  Federal Bureau of Investigation  and the CIA stands for Central Intelligence Agency.

The Federal Bureau of Investigation (FBI) is the body assigned the duties of Investigation and enforcement of federal laws regarding issues  national security, including terrorism, espionage, and cybercrime

To assist the president and other policymakers, the Central Intelligence Agency (CIA) is tasked with gathering, processing, and disseminating intelligence data relating to national security.

To safeguard national security objectives, the CIA engages in covert activities and supports foreign governments and intelligence agencies.

Find more exercises regarding the FBI;

https://brainly.com/question/30166719

#SPJ1

Answer:

rucks, buses, RVs, trolleys

Explanation:

What are some different types of vehicles that we share the road with?

Driving is a complex task, and for safe driving you need to know not just the rules of sharing the road with other cars, but with variety of other types of vehicles: trucks, buses, RVs, trolleys, motorcycles, bicycles and of course pedestrians.